Block Access Assessment Quiz Flashcards
Q1 In a SCSI relationship what is the host called?
LUN
Target
Initiator
Nexus
Initiator
Q2 In a SCSI relationship what is the storage system called?
Initiator
LUN
Nexus
Target
Target
Q3 - Where would you go to verify that the firmware version of your host bus adapter (HBA) is compatible with the ONTAP version you are running?
the Ontap documentation
The Host Utilities Documentation
The interoperability Matrix Tool (IMT)
The HBA documentation
Interoperability Matrix Tool
Q4 - In an iSCSI environment, which Ethernet network technology can be enabled on the initiator, switch and target to segment the network?
Quality of Service (QoS)
virtual LAN (vLAN)
N_Port ID virtualisation (NPIV)
Link Aggregation Control Protocol (LACP)
VLAN
Q5 - Which iSCSI Qualified name (IQN) example would be a valid default iSCSI node name for a SVM
Iqn.1992-08.com.ontap:an.a0123456789f:vs.1
Iqn.1992-05.com.Microsoft:an.a0123456789f:vs.1
Iqn.1992-05.com.windows:an.a0123456789f:vs.1
Iqn.1992-08.com.netap:an.a0123456789f:vs.1
Iqn.1992-08.com.netap:an.a0123456789f:vs.1
Q5 - Which iSCSI Qualified name (IQN) example would be a valid default iSCSI node name for a host running windows server 20216
Iqn.1992-08.com.ontap:an.a0123456789f:vs.1
Iqn.1992-05.com.Microsoft:an.a0123456789f:vs.1
Iqn.1992-05.com.windows:an.a0123456789f:vs.1
Iqn.1992-08.com.netap:an.a0123456789f:vs.1
Iqn.1992-05.com.Microsoft:an.a0123456789f:vs.1
Q7 - Which FC network feature must be enabled on a switch port to support FC LIFs?
N_Port ID virtualization (NPIV)
Link Aggregation Control Protocol (LACP)
Quality of service (QoS)
Unitised target Adapter (UTA)
N_Port ID virtulization
Q8 - which statement is true regarding FC physical ports and FC LIF addressing in ONTAP environments?
FC phyical ports wwpn and FC LIF wwpns use the same IEEE type
FC physical ports wwwpn addressing uses NPIV technogoly
An FC LIF must use the same WWPN as the FC phyical port on which it resides
FC LIF WWPN addressing uses NPIV technology
FC LIF WWPN addressing uses NPIV technology
Q9 - When you are zoning, which method does NetApp recommend for ONTAP SAN environments.
Single-initiator zoning by using both the FC LIF WWPNs and the FC physical port WWPN
Single-initiator zoning by using the FC physical port WWNPN
Single-initiator zoning by using the storage VM WWNN
Single-initiator wwpn and one or multiple target LIFs WWPN from the storage VM
Single-initiator wwpn and one or multiple target LIFs WWPN from the storage VM
Q10 - To create a thin-provisioned LUN by using Netapp recommended practices, which configuration do you choose?
A non-space-reserved LUN with thick volume provisioning
a space-reserved LUN with thin volume provisioning
a space-reserved LUn with thick volume provisioning
A non-space-reserved LUN with thin volume provisioning
A non-space-reserved LUN with thin volume provisioning
Q11. In MVMe/FC which protocol is used to provide multi pathing and path management for both path and failover target.
Device Mapper Muyliplathing (DM-multi pathing)
Multi pathing I/O (MPIO)
Asymmetric logical unit access (ALUA)
Asymmetric namespace access (ANA)
Asymmetric namespace access (ANA)
Q12 - In an ONTAP unified storage system, a host accesses a LUN from the storage controller connection on which the LUN resides. The path is in which asymmetric logical unit access (ALUA) state?
Optimized
Active
Active optimised
Active non optimised
Active optimised
Q13 - Which part of NVMe/TCP protocol data unit structure is required in all the protocol data units?
Protocol data unit padding field (PAD)
Protocol data unit data field (DATA)
Protocol data unit header digest (HDGST)
Protocol data unit header (HDR)
HDR
Q14 - which layer in TCP/IP model identifies the network protocol type of the packet?
Data link
Transport
Application
Internet
Data Link
