Chapter 17: Monomer Liquid And Polymer Powder Nail Enhancements Flashcards Preview

Nail Technology > Chapter 17: Monomer Liquid And Polymer Powder Nail Enhancements > Flashcards

Flashcards in Chapter 17: Monomer Liquid And Polymer Powder Nail Enhancements Deck (22):
1

Which of the following is not one of the 3 versions of monomer liquid used in the nail industry

A.) Odorless monomer liquid
B.) Ethyl methacrylate
C.) ethyl acrylic
D.) methyl methacrylate

C.) ethyl acrylic

2

Ethyl methacrylate monomer liquid is commonly referred to as _________

A.) EMA

3

MMA is a widely used monomer with a long history of safe use in medical and _______ products

A.) Dental

4

The initiators found in polymer powder , when activated by a catalyst will spring into action and cause monomer molecules to permanently link together into _______

B.) Long polymer chains

5

Compared to acne treatments, nail powders contain _______

C.) less benzoyl peroxide

6

It is recommended that you mix 1.5 parts monomer liquid with 1 part polymer powder to create a _______ bead

A.) medium

7

When applying an acid based nail primer, it is recommended that you use _______

A.) a light dotting action

8

A medium-grit abrasive is not recommended for _______

D.) finish filing off the nail

9

Nail forms generally are not made of _______

B.) fiberglass

10

Which type of nail form can be disinfected?

A.) plastic

11

The best nail brush to use with monomer liquid and polymer powder enhancement products is composed of natural kolinsky, _______, or a blend of both

A.) sable

12

Unused monomer that has been removed from the original container should be _______

C.) poured into an absorbent paper towel and placed in a plastic bag

13

The apex of the nail is also known as the _______

C.) arch

14

The apex is usually what shape?

A.) oval

15

The C-curve of the nail enhancement depends on the C-curve of the natural nail, which is on average _______%

D.) 35

16

Some manufacturers make a _______ that brushes on to cute the tacky inhibition layer that must be applied immediately after creating the odorless products enhancement

A.) resin

17

When acid-free primer dries on the nail it will be _________

B.) sticky and shiny

18

When performing a one-color monomer and polymer enhancement application it is recommended that the first bead or monomer and polymer applied to the nail be _________

C.) medium to dry

19

Acid based nail primer will dry to a _________

A.) chalky white

20

After the application of the two color monomer and polymer enhancement it is recommended that you file the underside of the nail extensions and then glide the abrasive over the nail with _________

A.) long sweeping strokes

21

When performing a one-color monomer and polymer enhancement maintenance service what should you do if there is excessive loose nail-enhancement product and lifting?

C.) soak off the enhancement and start fresh with a new application

22

When removing monomer and polymer enhancements the clients nails should soak in acetone for _________ or as long as needed to remove the enhancement product

B.) 20-30 minutes