Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

AWV1 Advancement March 2019 > COMNAVAIRFORINST 4790.2C > Flashcards

COMNAVAIRFORINST 4790.2C Flashcards

1
Q

Non-Destructive Inspection (NDI) technicians with proficiency lapses exceeding 12 consecutive months, but less than how many years, require refresher training that must be administered by a Fleet Readiness Center (FRC) or NDI specialist to reestablish certification? (Page 3-14)

A

3

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Both Oolevel and I-level administration divisions shall keep a message history file by date time group (DTG) for a minimum or how many months? (Page 3-82)

A

6

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What is a system for the recall and reporting of test equipment by means of automatic data processing techniques? (Page 3-64

A

MEASURE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Which system is a production control system used by the Fleet Readiness Center (FRC) to schedule, induct, and control D-level workload? (Page 3-65)

A

NDMS:

NAVAIR Depot Maintenance System

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

O-level Maintenance Material Control Officers (MMCOs) will conduct a monthly review of Subsystem Capability Impact Reporting (SCIR) data for trends in aircraft system/susbsystem readiness. Trending shall cover at least how many consecutive months? (Page 3-85)

A

12

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Who manages the maintenance department and is responsible to the Commanding Officer (CO) for the accomplishment of the maintenance department’s mission? (Page 3-77)

A

Maintenance Officer (MO)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

OOMA XRAY submissions can take up to how many days to be reflected upline into the Aircraft Inventory and Readiness Reporting System (AIRRS)? (Page 3-85)

A

7

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Who is responsible for the external condition of aircraft with regard to cleanliness and the day-to-day detection and reporting of corrosion and the failure of protective coatings? (Page 3-91)

A

Line Division Officer

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Newly Certified Non-Destructive Inspection (NDI) technicians shall require at least how many months of supervised work experience before assignment at an activity without any experienced NDI technicians? (Page 3-15)

A

3

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What provides coordination of technical data distribution and field engineering assistance and instruction for the maintenance, repair, and operation of Support Equipment (SE)? (Page 3-24)

A

NATEC:

Naval Air Technical Data and Engineering Service Center

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Which program is intended to ensure proper fleet introduction of new or modified Aviation Life Support Systems (ALSS)? (Page 3-40)

A

FAILSAFE:

Fleet Air Introduction Liaison Survival Aircrew Flight Equipment

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Which type of defect does not materially reduce the use of the unit or part for its intended purpose? (Page 3-47)

A

Minor

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

How many sections are Individual Material Readiness Llists (IMRLs) presented in? (Page 3-25)

A

5

employment data, change list, index, main body, and the activity inventory record

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Which program is the removal of installed equipment from a stricken or damaged aircraft or engine prior to disposal? (Page 3-47)

A

RILOP

Reclamation in lieu of Procurement

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Which type of resin is the standart paint system for all naval aircraft and Support Equipment (SE)? (Page 3-58)

A

Aliphatic polyurethane

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What is the Navy’s major logistics information system used in support of the COMNAVAIRSYSCOM Life Cycle Logistics System? (Page 3-65)

A

NALDA

Naval Aviation Logistics Data Analysis

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Which type of defect materially reduces the use of the unit or part for its intended purpose? (Page 3-47)

A

Major

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

Task-specific training shall be provided in an amount that will vary with complexity of the Technical Directive (TD) or maintenance technical manuals directed Non-Destructive Inspection (NDI) tasks, but shall not be less than how many hours for the first aeronautical part, assembly, or structural feature listed? (Page 3-13)

A

4

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

Lean, six sigma, along with what else comprise the primary AIRSpeed Continuous Process Improvement (CPI) methods? (Page 3-55)

A

TOC

theroy of constraints

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

Which system is an automated management information system which provides for standardized local management of Individual Material Readiness List (IMRL) assets? (Page 3-64)

A

LAMS

Local Asset Management System

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

Which level of repair is the repair of a damaged or non-operating gas turbine engine, its accessories, or components to an acceptable operating condition when the repair includes compressor rotor replacement or disassembly to the extent the compressor rotor could be removed? (Page 3-35)

A

First-degree

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

Which program is the restoration or replacement of primary aircraft structures that have reached fatigue life limits? (Page 3-47)

A

SLEP

Service Life Extension Program

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

Certified welders shall complete the minimum required OJT per which reference prior to being allowed to weld on aeronautical components? (Page 3-51)

A

NAVAIR 01-1A-34

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

What was designed to provide scheduled control of the predictable maintenance workload, for example, inspections, transfer or receipt of aircraft, and complaince with TDs? (Page 3-71)

A

MMP

Monthly Maintenance Plan

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

How many different ways is Support Equipment (SE) categorized as? (Page 3-4)

A

2

Common and Peculiar

26
Q

Which form should be used to requisition formal Technical Dircectives (TDs) by title and number? (Page 3-28)

A

DD 1348

27
Q

Which program established a process to evaluate the material condition of fleet aircraft? (Page 3-45)

A

ASPA

Aircraft Service Period Adjustment

28
Q

Who has overall cognizance of the Non-Destructive Inspection (NDI) Program and is responsible for managing a program of research, devolopment, training, and application of NDI techniques and equipment? (Page 3-8)

A

COMNAVAIRSYSCOM

29
Q

Non-Destructive Inspection (NDI) technicians and operators must maintain proficiency by performing the NDI method(s) for which they are certified at least how many times per month, as evidenced by entries on their NDI Technician/Operator Work Record (OPNAV 4790/140)? (Page 3-14)

A

2

30
Q

Which instruction assigns management responsibility of the Mobile Facilities (MF) Program? (Page 3-42)

A

NAVAIRINST 13670.1

31
Q

Which instruction assigns the responsibilities within COMNAVAIRSYSCOM for the various elements of the Non-Destructive Inspection (NDI) Program? (Page 3-8)

A

NAVAIRINST 13070.1

32
Q

What is the Support Equipment (SE) Custody and Maintenance History Record form number? (Page 3-23)

A

OPNAV 4790/51

33
Q

Which level of repair encompasses major engine inspections and the same gas turbine engine repair capability as second-degree except certain functions which require high maintenance man-hours and are of a low incidence rate are excluded? (Page 3-35)

A

Third-degree

34
Q

Which type of defect constitutes a hazard to airworthiness and the condition is such that corrective action is required prior to release of the aircraft for flight? (Page 3-47)

A

Critical

35
Q

Which form shall be used by Non-Destructive Inspection (NDI) technicians and operators to record all NDI tasks, supervised work experience, and trial practice applications performed? (Page 3-11)

A

OPNAV 4790/140

36
Q

Non-Destructive Inspection (NDI) operators are Navy and Marine Corps personnel, of which grade and above, who have successfully completed required training and may be certified to perfom limited NDI tasks? (Page 3-13)

A

E-4

37
Q

What authorized maintenance actions during combat conditions that may provide less than 100 percent restoration of an aircraft and its subsystems or components to original strength, mission capability, or configuration? (Page 3-17)

A

ABDR

Aircraft Battle Damage Repair

38
Q

Which maintenance level primarily includes inspecting, servicing, lubricating, adjusting, and replacing parts, minor assemblies, and subassemblies of aircraft, Unmanned Aircraft (UA) or Unmanned Aircraft Systems (UAS), and aeronautical equipment? (Page 3-1)

A

O-level

39
Q

Which maintenance level is performed by designated maintenance activities responsible for supporting units operating aircraft and aeronautical equipment? (Page 3-1)

A

I-level

40
Q

Which maintenance level is performed at or by Fleet Readiness Center (FRC) sites to ensure continued flying integrity of airframes and flight systems during subsequent operational service periods? (Page 3-2)

A

D-level

41
Q

Which form provides a record of certification and recertification of Non-Destructive Inspection (NDI) technicians and operators? (Page 3-10)

A

OPNAV 4790/139

42
Q

Over how many end items of aircraft maintenance Support Equipment (SE) and O(perational Test Program Set (OTPS) elements (IMRL items) used throughout the Navy and Marine Corps by aircraft maintenance activities are covered by the Aircraft Maintenance Material Readiness List (AMMRL) program? Page 3-18)

A

37,000

43
Q

Which classes of ships are exempt from establishing and maintaining and X-ray Radiography Program? (Page 3-9)

A

LHA and LHD

44
Q

Which type of inspection can detect defects with a high degree of accuracy and with no adverse effect upon the use of the part or system being inspected? (Page 3-7)

A

NDI

Non-Destructive Inspection

45
Q

What are considered the authority for the issue of specific items of Support Equipment (SE)? (Page 3-3)

A

IMRLs

Individual Material Readiness Lists

46
Q

What are two types of maintenance performed within the naval establishment without distinction as to levels of maintenance? (Page 3-2)

A

Rework and upkeep

47
Q

Which instruction contains maintenance functions and policy for guided missiles, aircraft guns, targets, bomb assemblies, rockets, jet assisted takeoff, and pyrotechnics? (Page 3-3)

A

OPNAV M-8000.16

48
Q

How many levels of division of maintenance concept is the Naval Aviation Maintenance Program (NAMP) founded on that classifies maintenance by complexity, depth, scope, and range of work performed? (Page 3-1)

A

3

49
Q

Who is responsible for managing Marine Air Traffic Control and Landing Systems (MATCALS)? (Page 3-6)

A

COMNAVAIRSYSCOM

50
Q

What supports the Chief of Naval Operations (CNO) and the Commandant of theMarine Corps (CMC) objectives for aviation readiness, safety, and the optimum use of manpower, facilities, materials, and funds? (Page 3-1)

A

NAMP

Naval Aviation Maintenance Program

51
Q

What is defined as all equipment required on the ground to make an aeronautical system, support system, subsystem, or end item of equipment, operational in its intended environment? (Page 3-3)

A

SE

Support Equipment

52
Q

Non-Destructive Inspection (NDI) technicians shall maintain X-ray proficiency by performing radiographic image X-ray inspections at least how many times per month? (Page 3-14)

A

2

53
Q

Which program provides the data required for the effective management of Support Equipment (SE) at all levels of aircraft maintenance? (Page 3-18)

A

AMMRL

Aircraft Maintenance Material Readiness List

54
Q

Which instruction establishes policy and procedures for configuration identification and management of necessary engineering changes with respect to content, cost, evaluation, timing of processing, and implementation? (Page 3-28)

A

NAVAIRINST 4130.1

55
Q

Which form is used by Individual Material Readiness List (IMRL) activities for Support Equipment (SE) transaction reporting? (Page 3-27)

A

OPNAV 4790/64

56
Q

What has management responsibility for the Configuration Management (CM) Program? (Page 3-28)

A

COMNAVAIRSYSCOM

57
Q

Which level of repair is the repair or replacement of turbine rotors and cumbustion sections, including afterburners; the replacement of externally damaged, deteriorated, or time limited components, gearboxes, or accessories; and minor repairs to the compressor section? (Page 3-35)

A

Second-degree

58
Q

What is the Individual material Readiness List (IMRL) Revision Request form number? (Page 3-27)

A

NAVAIR 13650/1

59
Q

Which publication issues the policies, procedures, and responsibilities for activities supporting or performing ordnance maintenance? (Page 3-40)

A

OPNAV M-8000.16

60
Q

Engines, Aeronautical Equipment Service Records (AESR), and CM ALS AESR records will be thoroughly screened by second and third-degree I-level activities to determine if the required maintenance action is within their repair capability. Screening will be completed within how many days of receipt? (Page 3-36)

A

10

61
Q

Licensed Aircraft Taxi personnel shall perform a taxi evolution every how many days for the T/M/S aircraft for which they are certified? (Page 3-49)

A

90

AWV1 Advancement March 2019 (1 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions