Flashcards in Important Information Deck (47):
Prick punch is used for?
Making Only FINE punch marks
Riveting Hammers are used for?
Driving rivets and light chiseling
8 oz Ball-pen hammer is used for?
striking punches, center punch
When are MALLETS used?
For Finishing purposes
Does not have a taper
Design for cutting thin sheets of metal
FLAT FILE is used for?
For all FILING Operations
Also called COLD CHISEL, best for cutting metal
Number of TEETH per INCH
If you are using the upper blade as a guide during a cutting operation, which snips are you using?
When should you use slight pressure on the back stroke while filing?
When filing very soft metals
Which stroke (forward or backward) is the cutting stroke?
Which type of lever is used to make cuts inside of a sheet metal?
When selecting a Saw blade, what factor concerning the PITCH must be consider?
Number of TEETH per INCH
Why is it essential that the twist drill may not be cooled in water?
because the metal may CRACK
Considered Non-Ferreous Metal if?
it has more of any other metal than ION
Ability to RESIST Abrasion
and permanent Distortion is called?
Describes metal that can be hammered, rolled, pressed into various shapes w/out cracking
the PROPERTY of a metal that permits it to be permanently drawn, bent, or twisted without breaking. Essential on metals used in wire and tubing
Refers to the metals ability to return to its original shape
It can withstand tearing, shearing, stretched or deformed without breaking
The Weight of a unit volume of a material
Ability to bend or deform without Shattering, this is not a desirable property
The temperature at which a metal changes from a solid to a liquid
Ability of a material to be formed, bent, or machined into required shapes
Resistance of the metal to being PULLED apart
Resistance to a cutting action
Is the maximum TWISTING STRESS a material can withstand
Maximum COMPRESSIVE load
How many major STRESSES?
The 2 Combination Stresses?
BENDING AND TORSION
What is a Ferrous Metal?
Any metal that has IRON as its MAIN element
You can find information on the designation and ID of Titanium in TO?
Solution heat treated, and then cold worked
Solution heat treated
Solution heart treated, and then stabilized
What are two primary ways of installing riverless nut plates?
Cold-working and adhesive bonding
Hi-Lock fastener's Pin designed in two basic head styles?
Hi-lok fasteners have a?
Threaded pin and
Eddie PIN has ___ flutes in the upper portion of the threaded area?
Parts of the rivet?
You can bend Aluminum tubing from ___ to ___
and Steel tubing from__to __
Aluminum 3/8 to 1-1/2
Steel 3/8 to 1in
TITANIUM Color ID
STAINLESS STEEL Color ID
ALUMINUM Color ID