Flashcards in LTFW Deck (30):

1

## What are the RWY dimensions for a C-146

### 2000' x 35'

2

## What are the RWY dimensions for a PC-12

### 2000' x 30'

3

## How is Zone A measured

### Zone A is measured from the edge of the useable area to include the ends of the overrun/runway/ taxiway/apron

4

## What is the apron parking setback distance for LTFW A/C

###
C-145: 63'

C-146: 61'

PC-12: 50'

5

## What is the turning radius for LTFW A/C

###
C-145: 18'9"

C-146: 47'6"

PC-12: 16'6"

(star turns required if minimum width is not met)

6

## What are the RWY dimensions for a C-145

### 1500' x 30'

7

## What is the clear zone length for LTFW A/C

### 100'

8

## What is the longitudinal grade criteria for LTFW A/C

###
C-145: max 6%

C-146: max 2%

PC-12: max 4%

(1.5% per 200')

9

## What is the military designation for a PC-12

### U-28

10

## What is the approach zone width for LTFW A/C

### Distance between the outside edge of both Zone Bs.

11

## What are the approach zone dimensions for LTFW A/C

### 800'W x 6000'L

12

## What is the width of the A/B zones for a PC-12

### 19'3" (4') / 5'4" (5')

13

## For semi-prepared surface taxiways and runways, obstacles will not be higher than how many inches

### 4 inches

14

## What is the formula for determining the width of zone A

### wing span - wheel track / 2

15

## What is the width of the A/B zones for a C-146

### 28'11" (3') / 6'11" (5')

16

## Can overruns be excluded for LTFW A/C

### Overruns may be excluded if space is not available. If there is only room for one, then the approach overrun should be used. Do not count overrun length when calculating useable LZ length

17

## How is the glide slope measured on LTFW landing zones

### Measured from the end of the clear zone to the obstacle in the Approach Zone that drives the steepest GSR. If necessary, determine GSR based on obstacles only in the Controlling Region. In these cases, the survey must clearly state the GSR does not account for obstacles in the Reportable Region of the Approach Zone. When obstacles in the Reportable Region are excluded from GSR calculations, aircraft must remain within the lateral bounds of the Controlling Region during approach to the LZ

18

## What is the glide slope ratio for LTFW A/C

###
C-145: 8:1

C-146: 35:1

PC-12: 35:1

19

## What is the formula for determining the width of zone B

### 10% of wing span

20

## What is the minimum TXY width for LTFW A/C

###
C-145: 18'

C-146: 22'

PC-12: 22'

21

## What is the width of the A/B zones for a C-145

### 30'7" (3') / 7'3" (5')

22

## What is the military designation for a C-145

### M-28

23

## How is Zone B measured

### Zone B is measured from the outside edge of Zone A.

24

## What is the RWY to TXY offset distance for LTFW A/C

###
C-145: 101'

C-146: 97'8"

PC-12: 74'

25

## What is the overrun length for LTFW A/C

### 100'

26

## What is the transverse grade criteria for LTFW A/C

###
C-145: 0% min to 4% max

C-146: 0% min to 3% max

PC-12: 0% min to 3% max

27

## What two regions are part of LTFW approach zones

### Controlling and reportable region

28

## What is the clinometer reading for an 8:1 GSR

### 7.1 degrees

29

## What is the obstacle criteria for LTFW clear zones

### Rocks 8" in diameter and larger should be removed and vegetation cut to 2'. Tree stumps should be cut flush with the ground.

30