PPT 2 and PPT 3 Flashcards
(42 cards)
What is the most commonly used in Physical Topology in Ethernet LANs
Star Topology
A MAC-Address is a _-Bytes
6
NIC is also called as TAP
Terminal Access Point
Provides redundancy by having several alternative routes.
Partial-Mesh Topology
Give the 6 Topology that Physical Topologies commonly use
Bus, Ring, Star, Extended Star, Hierarchical, and Mesh
All devices are connected to each other for redundancy and fault tolerance
Full-Mesh Topology
Defines the connection to the network of end user devices and networking devices
Network Topologies
A _______ is a network device that connects dissimilar networks.
Gateway
What is MAC - Address?
Media Access Control
Bus Topology is commonly called as?
Linear Bus
The two most common types of logical topology are _______ and _______
Broadcast and Token Passing
What is the 2 types of ring?
Single Ring and Dual Ring
LAN’s that are segmented through switches are called as ______
Switched LANs
The last three bytes are the ______
Card Number
Is a hardware device that establishes connections of computer devices on wireless LAN with a fixed wire network
WAP
A _____ is a device that is used to segment networks into different subnetworks
Switch
It uses a trunk node from which it branches to other nodes
Hierarchical Topology
AP has a range of?
up to 150 feet for HOME BASED APs
A switch is a device that is used to segment networks
into different subnetworks called
Subnet or LAN Segment
each host addresses its data to a particular NIC to a multicast address or to a broadcast address on the
network medium.
Broadcast Topology
The first three bytes are “____________”
Manufacturer-ID
Refers to the physical layout of the devices and media
Physical Topology
Access Points (AP) are also called as _________
Wireless Access Point (WAP)
A device that let’s you link networks together
Bridge