Flashcards in Safety- General (ER 10-11-2019) Deck (78)
Temporary warning signs are what color?
orange background and black lettering
2 scenarios when a face shield should be worn?
When handling batteries
Working around standby power supplies
In general, voltages greater than____are considered dangerous
FVDs will sound alarm if a voltage is over
What is the OSHA regulation for Hazard Communication?
What should a technician verify if approached by an OSHA Compliance Officer?
photo I.D. with serial number, signed by the Secretary of Labor
The only 3 states that poison ivy is not found in
Alaska, Hawaii, Nevada
Type C warning light:
Steady burn, Should be visible at 3000 feet on a clear night
Hard hats should be cleaned with
soap and water
How many steps are on the LED bar graph on a FVD?
daytime work that occupies a location for more than 1 and up to 3 days or any nighttime work lasting longer than one hour.
work that moves intermittently or continuously
Mobile work zone
Band requirements for a Drum
orange and white alternating horizontal bands
bands 4 to 6 inches wide,
Top band must be orange
How long will an alkaline 9V battery power a FVD?
about 9 hours of continuous usage
Phone Number for Unicall
OSHA Regulation for confined space
daytime operation that occupies a location for more than one, but less than 12 hours.
3 C's in an emergency
Call, Check, Care
Traffic cones, drums, and barricades are all what types of devices?
Three step plan that will increase your awareness of risk and help you decide what to do when faced with a threatening situation
Safety glasses should be marked with what?
4 basic components of a traffic control zone
1. Advanced warning area
2. Transition area
3. Activity area (includes buffer and work spaces)
4. Termination area
How much potential stress can be placed on your back if a 75-pound object is lifted improperly?
up to 750 lbs
impact and compression protection rating for work boots
If safety glasses are marked with Z87-2 what does this indicate?
They are Prescription lenses
Safety vests should meet what ANSI standard?
What is the maximum retesting interval for New Synthetic Rubber Gloves?
If safety glasses are marked Z87+ what does the + indicate?
a high velocity impact rating
Heel requirements for workboots
Heel must meet sole at 90 degrees and measures 3/4 inch in height at time of purchase, and no less than 1/2 inch at any time