TB Tools 9, 27, 28

Question 1

For cutting through gravel and tar covered roofs, wood flooring, light sheet metal and similar material you would use the. (TB,Tools 9, 2.2)
A)Carbide tip Blade B)Aluminum Oxide Blade C)Silicon Carbide Blade

Answer 1

A) Carbide Tip Blade

Question 2

The proper fuel mixture for the portable power saw is one gallon of gasoline to ____ fluid ounces of partner engine oil.(TB,Tools 9,2.3)
A)1.5 B)3.2 C)4.8 D)5

Answer 2

C)4.8

Question 3

Visual inspection of the belt on the power saw should be done _____ and after every cutting operation (TB,Tools 9,3.1)
A)Daily B)Roll Call C)MUD

Answer 3

C)Multi Unit Drill

Question 4

Carbide tipped blades should be returned to Technical Service Division when ___) or more tops are missing or broken. (TB,Tools 9, 3.3.2)
A)6 B)8 C)10

Answer 4

B)8

Question 5

Aluminum Oxide or Silicon carbides should be returned when blade is worn down to 8” radius or less (TB,Tools 9,3.3.3)
True False

Answer 5

False - 8” diameter or less

Question 6

The circle of danger is ____ for the portable power saw. (TB,Tools 9,4.7)
A)20ft Diameter B)20ft Radius C)15ft Diameter D)15ft Radius

Answer 6

B)20ft Radius

Question 7

Examination of the cockloft is preferably performed through? (TB,Tools 9,6.2.1)
A)Returns B)Roof Cut C)Top Floor Ceilings

Answer 7

C)Top Floor Ceilings

Question 8

When using the Thermal Imaging Camera which color indicates the least amount of heat? (TB, Tools 27, 2.3)
A)Black B)White C)Gray

Answer 8

A)Black

Question 9

Thermal imaging does not see through clear glass or plastic. (TB,Tools 27,4.1)
True or False

Answer 9

True, these act as a mirror to IR

Question 10

The cordless rebar cutter can be used to cut case hardened steel rods or locks. (TB, Tools 28,2)
True or False

Answer 10

False

Question 11

The rebar cutter can be used in an explosive atmosphere. (TB,Tools 28, 5.2)
True or False

Answer 11

False, this tools creates sparks