Question 1

One of the national legislative items which each jurisdiction in Canada has adopted as part of their applicable Act and/or Regulations is the: Select one: A. CSA B51 B. NFPA Codes C. NAFTA Codes D. ASME Codes E. ANSI Codes

Accepted Answer

A. CSA B51

Question 2

It much easier to have changes made to a regulation than it is to have changes made to a/an: Select one: A. Act B. Edict C. Regulation D. Proclamation E. Bill

Accepted Answer

A. Act

Question 3

The Act then has _____ which are pursuant to the enforcement of the Act. Select one: A. Proclamations B. Edicts C. Laws D. Bills E. Regulations

Accepted Answer

E. Regulations

Question 4

This group meets at least once a year on situations which they feel are important and relevant to Power Engineers and the fulfillment of their duties and responsibilities. Select one: A. ASME B. ACI C. IPECC D. ANSI E. SOPEEC

Accepted Answer

B. ACI

Question 5

In general, all Acts will have the all of the following in common except: Select one: A. The scope of the Act B. A listing of the Codes and standards that have not been adopted for use C. The purpose of the Act will always be included D. The designation of a Director or Administrator and a description of their various responsibilities E. The requirement for, and the methods of, inspecting, testing and certifying qualified repair and supervisory personnel will be clearly set out by the Act

Accepted Answer

B. A listing of the Codes and standards that have not been adopted for use

Question 6

The regulations are usually under the governance of a/an _____ rather than the actual parliament. Select one: A. Police Officer B. Elected official C. Official of the government D. Inspector E. Lawyer

Accepted Answer

C. Official of the government

Question 7

It much easier to have changes made to a _____ than it is to have changes made to an Act. Select one: A. Bill B. Regulation C. Edict D. Act E. Proclamation

Accepted Answer

B. Regulation

Question 8

This group of members of jurisdictional bodies meets at least annually answering to the ACI they ensure that all Power Engineer examinations meet the requirements set by the jurisdictional legislative bodies. Select one: A. ACI B. ASME C. SOPEEC D. IPECC E. ANSI

Accepted Answer

C. SOPEEC

Question 9

An international code which has been adopted and is enforced by all jurisdictions is the: Select one: A. Act B. CSA B51 C. CSA B52 D. Regulation E. ASME Code

Accepted Answer

E. ASME Code

Question 10

In general, all Acts will have the all of the following in common except: Select one: A. There will be a list of penalties, which could be levied for complying with the Act or Regulations B. A list of fees associated with the registration of pressure vessels C. The requirement for, and the methods of, inspecting, testing and certifying qualified repair and supervisory personnel will be clearly set out by the Act D. A listing of the Codes and standards that have been adopted for use E. The responsibility and delegated authority of the Authorized Inspector, as well as the responsibilities of the owner or Chief Engineer of a plant where an inspection is being done, will all be clearly stated

Accepted Answer

A. There will be a list of penalties, which could be levied for complying with the Act or Regulations

Question 11

This regulation lists the requirements which must be met for anyone wishing to write an applicable jurisdictional examination. Select one: A. Power Engineers Regulation B. Administrative Items Regulation C. Pressure Welders Regulation D. Pressure Equipment Exemption Order E. Pressure Equipment Safety Regulation

Accepted Answer

A. Power Engineers Regulation

Question 12

One of the national legislative items which each jurisdiction in Canada has adopted as part of their applicable Act and/or Regulations is the: Select one: A. NFPA Codes B. ANSI Codes C. ASME Codes D. NAFTA Codes E. CSA B52

Accepted Answer

E. CSA B52

Question 13

This group decides the content of the various courses and the criteria required to ensure a Power Engineer is properly qualified when a Certificate of Competency is issued. Select one: A. ACI B. ASME C. SOPEEC D. ANSI E. IPECC

Accepted Answer

E. IPECC

Question 14

The main or primary document which must be passed through the jurisdictional parliament is a/an: Select one: A. Regulation B. Proclamation C. Bill D. Edict E. Act

Accepted Answer

E. Act

Question 15

The provinces and territories of Canada are referred to as a/an: Select one: A. Authority B. Body C. Jurisdiction D. Government E. Collective

Accepted Answer

C. Jurisdiction

Brainscape's Knowledge GenomeTM

Book 3: 1-01 "Boiler & Pressure Vessels Acts" Flashcards

Brainscape's Knowledge Genome^TM