Show me

Question 1

1) Open the bonnet, identify where you would check the engine oil level and tell me how you would check that the engine has sufficient oil

Answer 1

Identify dipstick/oil level indicator, describe checking of oil level against the minimum/maximum markers.

Question 2

2) Show me / explain how you would check that the power assisted steering is working before starting a journey.

Answer 2

If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made.

Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate.

Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.

Question 3

3) Open the bonnet, identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level.

Answer 3

Identify high/low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.

Question 4

4) Show me how you would check the parking brake (handbrake) for excessive wear, make sure you keep safe control of the vehicle

Answer 4

Apply foot brake firmly. Demonstrate by applying parking brake (handbrake) so that when it is fully applied it secures itself, and is not at the end of the working travel.

Question 5

5) Show me how you would check that the horn is working (off road only).

Answer 5

Check is carried out by using the control (turn on ignition if necessary).

Question 6

6) Open the bonnet, identify where the brake fluid reservoir is and tell me how you would check that you have a safe level of hydraulic brake fluid.

Answer 6

Identify reservoir, check level against high/low markings.

Question 7

7) Show me how you would check that the direction indicators are working.

Answer 7

Applying the indicators or hazard warning switch and check functioning of all indicators. (may need to switch ignition on, prompt not to start engine)

Question 8

8) Show me how you would check that the brake lights are working on this car. (I can assist you, if you need to switch the ignition on, please don’t start the engine)

Answer 8

Operate brake pedal, make use of reflections in windows, garage doors, etc, or ask someone to help. (may need to switch ignition on, prompt not to start engine)

Question 9

9) Show me how you would clean the windscreen using the windscreen washer and wipers.

Answer 9

Operate control to wash and wipe windscreen (turn ignition on if necessary).

Question 10

10) Show me how you would set the demister controls to clear all the windows effectively, this should include both front and rear screens.

Answer 10

Set all relevant controls including; fan, temperature, air direction / source and heated screen to clear windscreen and windows. Engine does not have to be started for this demonstration.

Question 11

11) Show me how you would switch on the rear fog light(s) and explain when you would use it/them. (No need to exit vehicle, Please don’t start the engine.)

Answer 11

Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use

Question 12

12) Show me how you switch your headlight from dipped to main beam and explain how you would know the main beam is on whilst inside the car

Answer 12

Operate switch (with ignition or engine on if necessary), check with main beam warning light