1 st topek

Question 1

A unit of measurement of electrical current

Answer 1

Ampere

Question 2

A unit of power which is equivalent to 1000w

Answer 2

kilowatt(w)

Question 3

A wire or cord which provides for current flow

Answer 3

Conductor

Question 4

The quality of electrical current in ohms that resist the flow of current

Answer 4

resistance

Question 5

resistance is measured in

Answer 5

ohms

Question 6

Material used to cover electrical wires which may be made from plastic, rubber or asbestos

Answer 6

insulator

Question 7

Are implements used to modify raw materials for human use

Answer 7

tools

Question 8

Accessories that are used to connect from boxes to conduits or raceways to the other boxes in the electrical system

Answer 8

Connectors and Adapters

Question 9

Plastic conduits or raceways designed to be a channel of wire that are classified as rigid non metallic or PVC. The flexible non metallic or Cpc, and the surface plastic molding

Answer 9

Non-metallic conduits

Question 10

Metal raceways or conduits

Answer 10

metallic conduits

Question 11

The 4 types of metallic conduits are

Answer 11

Rigid Steel conduit, intermediate metallic conduit, electrical metallic conduit or tubing, and the flexible metallic conduit

Question 12

The blade tip is wedge-shaped and resembles a negative(-) sign

Answer 12

Flathead screwdriver

Question 13

This is a cross tip resembling a positive(+) sign. this is used to drive screws with cross slot head

Answer 13

Philips screwdriver

Question 14

This could be the shape of a screw driver or wrench used to to drive screws with hexagonal slots head

Answer 14

Allen screwdriver

Question 15

These are tools used in driving or pounding and pulling out nails.

Answer 15

Hammer

Question 16

THE THREE TYPES OF HAMMER ARE

Answer 16

Claw Hammer, Mallet, Ballpeen Hammer

Question 17

this type of pliers is used for cutting fine, medium and big wires and cables

Answer 17

cutting pliers or side cutting pliers

Question 18

This type of pliers is used for gripping, holding, and cutting electrical wires and cables and even small nails. They are usually used by linemen in doing heavy tasks.

Answer 18

Combination pliers

Question 19

The type of pliers used for cutting and holding fine wires. this can reach tight spaces or small opening where other pliers cannot reach.

Answer 19

Long Nose pliers

Question 20

A tool used for removing insulation of medium sized wires ranging from gauge#10 to gauge #16

Answer 20

Wire Stripper

Question 21

This is used by linemen to remove insulation of wire and cables in low and high voltage transmission lines

Answer 21

Electrician’s Knife

Question 22

A small drilling machine

Answer 22

Portable electricl drill

Question 23

This is used to cut metal conduits and armored cable

Answer 23

Hacksaw

Question 24

A pocket size tool used to test the line wire or circuit if there is a current in it

Answer 24

test light

Question 25

Is used to measure the diameter of wires/conductors in circular mils

Answer 25

micrometer

Question 26

is used in determining the size of wires and conductors

Answer 26

Wire gauge

Question 27

is a measuring tool used to measure the length of an object in centimeters and inches

Answer 27

pull-push rule

Question 28

is a measuring object used to measure length, width, and thickness of short flat objects

Answer 28

Ruler/foot rule

Question 29

is also called tong tester

Answer 29

Clamp ammeter

Question 30

it is used to measure current flowing in a conductor

Answer 30

clamp ammeter

Question 31

is an instrument used to measure the amount of electrical current

Answer 31

Ammeter

Question 32

Is an instrument used to measure electrical pressure or voltage in a circuitj

Answer 32

voltmeter

Question 33

an instrument used to measure the insulation resistance if conduits or wires - is also called mega ohm meter

Answer 33

Megger

Question 34

is used to calculate electrical consumption

Answer 34

Kwh meter

Question 35

is used to measure voltage, resistance and current of a circuit

Answer 35

Volt-Ohmmeter or multi-tester

Question 36

A kind of joint commonly used to join two or more conductors inside the junction box

Answer 36

Rat tail or Pig tail

Question 37

A method of wrapping used on small cables because the strands are flexible and all can be wrapped in one operation

Answer 37

Y-splice

Question 38

This is used where the tap wire is under heavy tensile stress

Answer 38

Knotted tap joint

Question 39

This is used where the tap wire is under considerable tensile stress

Answer 39

Plain Tap joint

Question 40

A two-Tapped wire turned simultaneously and is used where the the two tap wire is under heavy tensile stress

Answer 40

Duplex Cross Joint

Question 41

Is done the same as in plain tap, the only difference is that this tap is a combination of two plain taps side by side with each other

Answer 41

Cross Joint

Question 42

Used as an large solid conductors where it is difficult to wrap the heavy tap wire around the main wire

Answer 42

Wrapped tap or tee join