Screws and plates Flashcards

1
Q

What forces do plates contol?

A

all the forces
plate–bending
screws–torsion, compression, tension

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is required for a bone plate to adequately control all of the forces acting on a fracture?

A

The screws holding it must engage 6 cortices in both the proximal and distal fragments

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

How does an IM pin help a bone plate?

A

it provides better control over cycling forces than the plate alone

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

How do locking plates differ from other bone plates?

A

they act like external fixators so their rules of application differ from those applicable to regular bone plates

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What are nonlocking bone plates?

A

The bone plates are screwed into the fractured bone so scews transfer forces of weightbearing from bone to plate by increasing friction between bone and plate–thus want plate closely contoured to bone

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What are locking bone plates?

A

the scews screw into the bone AND into the plate. “internal external fixators” Don’t need to be as closely applied to the bone. However, cannot place scews at an angle

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What are locking bone plates?

A

the scews screw into the bone AND into the plate. “internal external fixators” Don’t need to be as closely applied to the bone. However, cannot place screws at an angle

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What are forces neutralized by plates?

A

all forces

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Why are screws not usually used by themselves?

A

they don’t control bending

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What are advantages of plate fixation?

A
  1. reconstruction of fractured bone not necessary
  2. can be placed in areas of a lot of overlying muscle mass (femoral, humoral, pelvic fracture repairs)
  3. require little intervention once plated
  4. can compress fracture fragments to increase friction
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What are the disadvantages of plate fixation?

A
  1. nonlocking plates require surgical approach almost as long as the plate (can sometimes tunnel to place locking plate)
  2. screw placement dictated by location of preformed holes in plate
  3. can be difficult to capture short proximal or distal fragments with the minimum 3 screws
  4. if infection present can be difficult to resolve completely without removing the plate–requires operation!
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What are the advantages of pin-pate combinations?

A
  1. the IM pin adds significant bending control, the plate takes care of torsional and axial forces
  2. the pin can simplify fracture reduction for plate placement
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Screws are sized based on what?

A

their outer diameter

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What size hole do you drill to place a screw?

A

the size of the inner diameter. then cut threads to the outer diameter of the scew

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What are interfragmentary scews?

A

screws that are placed across the fracture once it is in alignment. can make a counterskin to prevent them form interfering with the plate

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What are the rules for counting cortexes?

A
  1. 2 vs 1 cortex
  2. if a scew passes through a hole or a fracture line then that cortex doesn’t count
  3. a screw may be in the cortex of one segment and the cortex of another
17
Q

What are positional screws?

A

screws for which both cortices are drilled and tapped and the screw is placed (may have to clamp if is going across a fracture line)

18
Q

What are lag scews?

A

the near cortex is overdrilled so the threads don’t engage here. As you tighten the screw, the screw head hits the near cortex and the head compresses the near cortex against the far one

19
Q

What are variable pitch screws and pins?

A

they have different pitch so they compress the fracture

20
Q

How are bone plates named?

A

by the size of screws their holes accommodate

21
Q

How are bone plates named?

A

by the size of screws their holes accommodate

22
Q

What are three types of holes in a screw for plate placement?

A
  1. locking
  2. round holes
  3. oval holes–allow fracture to be compressed
23
Q

What is a neutralization plate?

A

it holds the fracture fragments in close formation so that some axial forces can be borne by reconstructed bone

24
Q

What is a compression plate?

A

the fragments are squeezed together–transverse fracture

25
Q

What is a tension band?

A

the plate is there to counter mostly tensile forces

26
Q

What is a butress plate?

A

the fracture isn’t fully reconstructed and the plate must bear most or all of the forces of weightbearing until the bone heals

27
Q

What side of a bone should a plate be placed on?

A

on the tension side of the bone–better to stress in the long direction than to bend it

28
Q

What are fractures that are good to plate?

A
  1. diaphyseal fractures (long time)
  2. fractures in locations where external skeletal fixation is not a good choice (muscle!)
  3. fractures in animals that may not return for a recheck
29
Q

What fractures are NOT good to plate?

A
  1. fractures with short proximal or distal fragments

2. fractures involving growth plates