Standard Callouts

Question 1

Prior to crossing the hold short line

Answer 1

PF/PM: Runway _____ verified

Question 2

Initial Thrust

Answer 2

PF: Autothrottles”

Question 3

Thrust levers at takeoff setting

Answer 3

PF: Check Thrust
PM: Thrust set

Question 4

@ 100 knots indicated

Answer 4

PM: 100 knots

Question 5

5 knots prior to V1

Answer 5

PM: “V1”

Question 6

VR

Answer 6

PM: Rotate

Question 7

Positive Rate of Climb

Answer 7

PF/PM: Positive rate

PF: Gear Up

Question 8

Transition Altitude (climbing)

Answer 8

__ In/hPa (767-4: The term “standard” may be used when selecting STD)

Question 9

Transition level (descending)

Answer 9

__ In/hPa

Question 10

1000 feet above or below assigned altitude

Answer 10

PM: designate approaching altitude appropriately (6000 for 7000; 6 for 7)

Question 11

2,500ft RA

Answer 11

Auto/PM (if not announced by A/C):
2500

PF and PM: “____ In/hPa”

Question 12

1,000ft RA

Answer 12

PF:
Set missed approach altitude. Cleared to land.
or
Set missed approach altitude. No landing clearance

Question 13

500 feet RA (Non-Autoland)

Answer 13

PM: 500

PF:
Stable
or
Unstable, going around

Question 14

500 feet RA (autoland)

Answer 14

PM: 500

PF: LAND__. stable
or
Unstable, going around

Question 15

100 feet prior to minimums

Answer 15

PM: Approaching minimums

Question 16

At minimums

Answer 16

PM: Minimums

PF: Landing
or
Going around

Question 17

Landing Roll 80 knots

Answer 17

PM: 80 knots

Question 18

Missed approach

Answer 18

PF:
Going around flaps 20, check thrust

Positive rate, Gear up

Set missed approach altitude

@400ft LNAV/HDG SEL

@800ft Set clean Maneuvering speed, flaps 5,

Flaps 1,

Flaps up

@ Clean maneuvering speed, FLCH (verify MCP speed), Autopilot, After Takeoff Checklist

Question 19

V1 Cut

Answer 19

After rotation:

PF: Positive rate, Gear up
PF: HDG SEL/LNAV

@800ft
PF: Vertical speed +100, Set clean maneuvering speed, autothrottle arm switch off

Accelerate and Retract flaps on schedule

@ clean maneuvering speed
PF: Flight Level Change (FLCH), set clean maneuvering speed, set max continuous thrust.

Question 20

Single Engine Go-Around

Answer 20

PF: Going around flaps 5, check thrust

PF: Positive rate, Gear up, Set missed approach altitude

@400ft HDG SEL

@800ft Set clean Maneuvering speed (retract flaps on schedule)

@clean maneuvering speed Flight Level Change (FLCH), set clean maneuvering speed, set max continuous thrust, After Takeoff Checklist.