Lesson 6

Question 1

Each time before gloves are used, they should be given a ? and field air test.

Select one:

a. check for powder and moisture contamination
b. dielectric test
c. rubber wear examination
d. visual inspection

Answer 1

d. visual inspection

Question 2

The most important article of protection for the Qualified Electrical Worker is a good pair of ? of the proper dielectric strength.

Select one:

a. climbers
b. grounding cables
c. insulated Klein’s pliers
d. rubber gloves

Answer 2

d. rubber gloves

Question 3

Rubber insulating gloves and rubber insulating ? should be stored in the same manner and treated with the same care.

Select one:

a. boots
b. cover-up
c. sleeves
d. tools

Answer 3

c. sleeves

Question 4

The corresponding color for a Class 3 rubber glove is ? .

Select one:

a. green
b. red
c. white
d. yellow

Answer 4

a. green

Question 5

Leather protectors must be inspected for splinters and other embedded objects.

Select one:
True
False

Answer 5

True

Question 6

Rubber gloves should be stored away from direct sunlight to prevent ? cutting.

Select one:

a. ozone
b. radon Incorrect
c. thermal Incorrect
d. ultraviolet

Answer 6

a. ozone

Question 7

The proof test voltage should not be construed to mean the safe voltage on which the rubber gloves can be used.

Select one:
True
False

Answer 7

True

Question 8

Rubber sleeves are worn to protect the Qualified Electrical Worker’s arms and ? from accidental contact.

Select one:

a. hands
b. neck
c. shoulders
d. torso

Answer 8

c. shoulders

Question 9

Rubber gloves are washed with cold water and a strong detergent to remove all dirt prior to electrical testing.

Select one:
True
False

Answer 9

False

Question 10

Rubber gloves are inflated with air to check for leaks and inspected for cuts, scratches, and other physical defects.

Select one:
True
False

Answer 10

True

Question 11

After the inflated inspection, but before the electrical tests are given, rubber gloves are stored for ? to permit the rubber to relax.

Select one:

a. 12 hours
b. 24 hours
c. 36 hours
d. 72 hours

Answer 11

b. 24 hours

Question 12

Class ? rubber gloves are proof tested at 5,000 volts AC or 20,000 volts DC for a period of up to three minutes.

Select one:

a. 0
b. 1
c. 2
d. 3

Answer 12

a. 0

Question 13

Rubber gloves should be exchanged or replaced when they show signs of any type of damage.

Select one:
True
False

Answer 13

True

Question 14

An “air test”, as performed by a Qualified Electrical Worker in the field, calls for him or her to capture air in the glove, pinch the cuff shut, and roll the cuff toward the fingers.

Select one:
True
False

Answer 14

True

Question 15

Rubber gloves and sleeves should be stored in ? when in the field.

Select one:

a. a dimly lit shelf
b. a tool bin on the truck
c. canvas bags
d. the Qualified Electrical Worker’s bag

Answer 15

c. canvas bags

Question 16

One of the most important tests on rubber gloves is the field inspection.

Select one:
True
False

Answer 16

True

Question 17

A monthly glove inspection is the cheapest life insurance available.

Select one:
True
False

Answer 17

False

Question 18

Rubber gloves, after they have been washed, rinsed, and dried, should be powdered with ? powder to prevent stickiness.

Select one:

a. aluminum
b. baby
c. foot
d. talcum

Answer 18

d. talcum

Question 19

To dissolve perspiration from rubber gloves, rinse the rubber gloves with ? .

Select one:

a. citrus-based rubber cleaning solvent
b. clear cold water
c. hot soapy water
d. rubber cleaning solution

Answer 19

b. clear cold water

Question 20

A spongy spot on a rubber hood means the hood may have been contaminated with oil.

Select one:
True
False

Answer 20

True

Question 21

A very important item to check for on rubber goods is the last test date on the equipment.

Select one:
True
False

Answer 21

True