18 UV & LED Gels

Question 1

A type of mail and Hance meant products that hardens when exposed to UV light source. _____. Gels have become the newest form of enhancements to sweep the industry.

Answer 1

UV gel’s

Question 2

UV and LED curing nail enhancements aren’t thought of as methacrylates. But they are similar. Like wrap resins, adhesives and mono and polymer enhancements UV gels Rely On ingredients from the Monomer and Polymer chemical family. From a subcategory called______. Wrap resins I called___and monomer liquid and polymer are the same as UV gel’s and they are called___.

Answer 2

. (acrylates and methacrylates.) Cyanoacrylate’s, Methacrylates

Question 3

The most UV and LED gels are made of acrylates, newer ones are using methacrylates. Just like wraps, mono, and poly powder. UV and LED gels can also contain monomers but they rely mostly on somethings similar______. Mono means one, probably means many. Oligo means____. It is a short chain of monomers that is not long enough to be considered a polymer and referred to as a pre-polymer. Monomer liquid polymers are solid. Oligomers are in between. They are often thick, gel like and sticky.

Answer 3

Oligomer, few

Question 4

UV gel’s normally rely on urethane acrylic but are now relying on urethane methacrylates. While some are in combination of the two. ____ refers to the type of starting material used to create common gel resins. It’s known for its high abrasion resistance and durability. They react to UV light and a chemical called___causes polymerization.

Answer 4

Urethane, photoinitiator

Question 5

And give me an LED shells are easy to apply but not as hard as acrylics. They require UV or LED to cure..Some professionals favor a UV gel that’s thick and doesn’t level on its own. Others use shelves that south level quickly. They are thin viscosity medium viscosity or thick for scarcity and building or sculpting shelves viscosity is the measurement of__or__of a liquid and a sex it’s flow.

Answer 5

Thickness or thinness 

Question 6

1. a clear resin is used for the one color method for clients who wish to wear polish over an enhancement.
2. Pink or white resin for a two colored method for a French or American Manny without any nail lacquer. 

Answer 6

Ok

Question 7

__Are used to increase adhesion to the nail plate similar to a primer they vary in consistency and chemical components some smell like monomer and polymer primers some don’t smell. __Include any stick this Casity resin that allows the nail tech to build an arch and curved to the fingernail. Can be used w self leveling Jealous and can reduce filing and shipping.

Answer 7

UV bonding gels, UV building gels

Question 8

__Are used to enhance the thickness of other Gels while providing a smooth surface. I__can be building gels or self-leveling shells that include color pigment. ___R and alternative to traditional nail LeCours they do not try the cure and they don’t have any solvent odor and won’t become smudged 

Answer 8

UV self-leveling gels .
Pigmented gels
Gel polishes

Question 9

____May also be called sealing gels, finishing gels or shine gels. They can also be used over acrylicsThere are some that cure with an inhibition sticky layer and some to a high shine tax-free. The___is a tacky surface left after being cured. traditional UV gloss Gels do not discolor after prolonged exposure to UV light while tack free gloss gels may discolor. How many manufactures are developing tack free clause gels that don’t discolor upon exposure but for now traditional UV gloss shells still hold the market for non-yellowing performance.

Answer 9

UV glass shelves, inhibition layer

Question 10

Some of the supplies needed :

1. UV or LED gel primer or bonding gel is something else you need for your supplies.
2. it’s important when using nail tips which are also required as supplies to size the tips of the curve matches the curve of the nail If the tip is too flat it could crack match the curve of the tip to the nails. You also need a brace of files and buffers select a medium abrasive of__for natural nail prep. Choose a fine abrasive__for smoothing and a fine buffer__for finishing.

Answer 10

180
240
350

Question 11

And gels have less odor than acrylics the cure quickly and where longer than natural nail polish.If a client has fingernails with an arch or curves then self-leveling shell may be the best option or a medium to fix this Cassidy chill. If the client returns to the salon often with broken enhancements than a gel with fiberglass may be the best.

Answer 11

Ok

Question 12

Hi___is a special bulb that admits like to cure gel nail enhancement there are4,,6,7,8,9 watt bulbs. They vary and caring powder and affect performance gels performance once it’s been cured. __Is the light unit in a specialized and controls UV an LED bulbs to cure gels.

Answer 12

UV or LED bulb

. UV or LED lamp

Question 13

Lamps are typically refer to by the number of bulbs inside the lamp multiplied by the watts. Remember that the__measures how much electricity is consumed but does not indicate how much UV light a lamp produces. It’s a lamp has four bulbs each nine words that the light unit is called a__white lamp. And if it only has three bulbs and each is nine white then it is__white lamp.

Answer 13

Watts, 36, 27

Question 14

UV bulbs will stay violet for years but after a few months they produce too little UV light to properly cure enhancements. They must be changed to to three times per year depending on the use or service breakdown skin irritation and product sensitivity can occur from inadequately cured gel . The most common bulb is a 9 W. The most shells can be cured and any manufactures 36 white lamp. If a gel is cured an alarm for that it’s not intended to be cured and it’ll become hard crack lift or separate from the nail. It may not have a high shine. Similar to a Monomer and Polymer system applied with incorrect Mix ratio. LED lamps don’t care most traditional UV gels use only labs that manufacture endorses using the wrong LED cut drastically affect the curing process

Answer 14

Ok

Question 15

 to remove gel polish professionals fWhile polish off by hand with an abrasive or e-file some gel polishes I removed by soaking the nails in acetone for 5 to 10 minutes and scraped off with a wooden stick take care not to damage the natural nail plate since it will Softing upon exposure to the acetone this could damage and alter the color of the fingernail. This could also lead to infection or cracking due to decreased nail strength.

Answer 15

Ok

Question 16

Before filing the nail be sure to clean the nail with the gel manufacturers recommended cleanser or ____ 99% or better removes oils from the fingernail and has better adhesion file with a lighter touch.

Answer 16

Isopropanol

Question 17

Traditional UV gel’s are also known as ____and cannot be removed with acetone. But soft UV shells are removed fairly easily with acetone. When removing the inhibition layer avoid cleaning in a way that would get the gel onto the skin wipe away from the cuticle to the free edge.

Answer 17

Hard Uv gels ,

Question 18

When doing one color UV or LED gel on tips or natural nails the fifth step is to use a solvent-based cleanser to remove oil’s from fingernail before a breeding with the file this increases did he serve properties of the gel start with a little finger and work towards the thumb.

Answer 18

Ok

Question 19

Step 7 is to wipe off any excess applicator of primer or bonding gel from the brush and use a slightly damp brush. ensuring the nail plate is completely covered per manufacturers recommendation avoid using too much to prevent runoff to the skin. Step 9 is to gently brush UV or LED gel to the fingernail surface including the free edge leave at___gap around the cuticle and sidewall area of the finger nail. Avoid introducing air into the jail as this will reduce the strength of the cure gel and lead to bubbles and cracking applied to the clients right hand from pinky to pointer.

Answer 19

3/16 inches, or 4.76 mm

Question 20

Step 12 is to apply a small amount of gel a self-leveling one works best over the properly cured first layer carefully pour the UV gel across the first layer and smooth it into place using a technique that mimics the application of polish. Avoid padding or pressing hard this can introduce air into the gel and decreased strength. Brush over and around a free edge to create a seal.

Answer 20

Ok

Question 21

Stop 18 is to remove the dust and filings with a clean and disinfected nylon brush remove any oils that may have been deposited on the fingernail during failing this will decrease potential problems that could cause defects in the final coat of gel.

Answer 21

Ok

Question 22

Further to color method UV or LED gel on tips or natural nails the sixth step is to select the desired white shell to create the two color process working from right to left on the hand apply a coat of the white shell over the tip and along the side walls of the fingernail to create a smile line apply a thin so it cures completely and does it lift wipe any unwanted gel from the tip.

Answer 22

Ok

Question 23

After another layer is added for thickness cure the nails andFor the 18th step remove the inhibition later then check the fingernail contours follow up by removing the dust. Then clean the fingernail and apply the glass shelves sealer finisher then remove the inhibition layer if required. Apply now oil and hand lotion then massage the hand and arm.

Answer 23

Ok

Question 24

For the UV and LED gel maintenance clean the nails and remove the existing polish then push back the opening him and remove the cuticle from the nail plate. You will lightly Buff the natural nail regrowth with a medium 180 grit abrasive to remove the shine on the surface of the natural nail plate. Then remove the dust from the nail surface and clean and dehydrate the new apply primer or bonding to the natural no cure the bonding resin.

Answer 24

Ok

Question 25

UV or LED gel over monomer liquid and polymer powder nail enhancements with UV or LED gel polish for the fifth step: apply a thin coat of you for your LED jail over the entire surface of the enhancement in a brushing technique use ample pressure to ensure a smooth finished look to the application apply a small amount of child to the free edge of the fingernail to The end and create an even a consistent appearance.

Answer 25

Ok

Question 26

For UV and LED tail removal for soft gel polishes deposit to soak off solution in his finger bowl or other containers so that the level of remover is sufficient to completely immersed the finger nail enhancement. A cotton ball foil and gel remover can be used in place of the finger bowl this reduces the odor and evaporation of the remover as well as the amount of remover required. Then you will soak The clients finger nails in the solution for a recommended manufacture period of time then you will use a wooden stick or stainless steel push her to ease the gel off the fingernail.

Answer 26

Ok