Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

EXAC EXAM 3 > 1. Final Project - Acoustics > Flashcards

1. Final Project - Acoustics Flashcards

1
Q

Define these 4 terms:

  1. NOISE
  2. PITCH
  3. VOLUME
  4. FREQUENCY
A
  1. NOISE
    • Any unwanted sound
  2. PITCH
    • Wavelength of sound
  3. VOLUME
    • Amplitude of sound
  4. FREQUENCY
    • # cycles/second (hertz)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is a sound wave?

A

Sound waves are longitudinal pressure waves in the air or an elastic medium.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What is a Decibel (dB)?

A

Decibel (dB) is a unit for expressing the relative pressure or intensity of sounds on a uniform scale from 0 (threshold for hearing) to 130 (pain).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What is a frequency?

A

Frequency, sometimes referred to as pitch, is the number of times per second that a sound pressure wave repeats itself.

The range is between 15Hz to 20,000 Hz for human ear.

Hertz (Hz) is 1 cycle per second.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What is a reflecting surface?

A

Reflecting surfaces are nonabsorptive surfaces from which incident sound is reflected, used to redirect sound in a space.

It must have least dimension equal or greater than the wavelength of the lowest frequency of the sound.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What is diffracted sound?

A

Diffracted sound is airborne sound waves bent by diffraction around an obstacle in their path.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What is reflected sound?

A

Reflected sound is the return of unabsorbed airborne sound after striking a surface, at an angle equal to the angle of incidence.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

When is reflected sound important?

A

In a room, the human ear always hears direct sound before it hears reflected sound.

As direct sound loses intensity, the importance of reflected sound increases.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What is attentuation?

A

Attenuation is a decrease in energy or pressure per unit area of a sound wave, occuring as the distance from the source increases as a result of absorption, scattering or spreading in three dimensions.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What is reverberation?

A

Reverberation is the persistence of a sound within an enclosed space, caused by multiple reflection of the sound after its source has stopped.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What is resonance?

A

Acoustic resonance is a phenomenon in which an acoustic system amplifies sound waves whose frequency matches one of its own natural frequencies of vibration.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What is an echo?

A

Echoes are the repetitions of a sound produced by the reflection of sound waves from an obstructing surface, loud enough and received late enough to be perceived as distinct from the source.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What is flutter?

A

Flutter is a rapid succession of echoes caused by the reflection of sound waves back and forth between two parallel surfaces.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What is focusing?

A

Focusing is the convergence of sound waves reflected from a concave surface.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What are 6 types of sound that can reach a listener? (2 types not shown below)

A
  1. Incident Sound (mirror)
    • reflects off of surfaces with low a (sound absorb)
    • to be effective surface area>wavelength
    • returns @ angle = incident angle
  2. Diffracted Sound
    • airborne sound waves bent by obstacle in path
  3. Airborne Sound
    • Travels directly from source to listener
  4. Attenuation
    • greater distance from source = lower amplitude as it spreads
  5. Echoes
    • reflected sound waves
    • loud & late enough to be considered distinct
    • occurs w parallel surfaces 60’(18m) apart
  6. Focusing
    • convergence of sound waves reflected from concave surface
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What STC rating does NBC rqr for dwelling units?

A

STC 50

17
Q

A17 - Define these 5 terms:

  1. ATTENUATION
  2. ARTICULATION
  3. SOUND INTENSITY
  4. SOUND ABSORPTION
  5. SOUND REVERBERATION
A
  1. ATTENUATION
    • reduction of sound
  2. ARTICULATION INDEX
    • measure of speech intelligability
    • >.6 = good communication
  3. SOUND INTENSITY
    • dB
  4. SOUND ABSORPTION
    • ratio of sound absorbed by material
    • unit = sabins
  5. SOUND REVERBERATION
    • persistance of sound after source stopped producing
18
Q

Define these 3 measures of sound :

  1. NC
  2. NRC
  3. STC
A
  1. NC - Noise Criteria
    • ​​specifies max. background noise in a given space
  2. NRC - Noise Reduction Coefficient
    • # rating system for ave. sound sbsoption coefficient of a material @ frequencies of 250/500/1000/2000 Hz
  3. STC - Sound Transmission Class
    • Rating system to determine effectiveness of construction cross sections to stop sound transmission.
19
Q

What is the typ. STC rating for :

  1. normal speech heard through a barrier
  2. loud speech heard through a barrier
  3. loud speech heard but not understood
  4. loud speech is faint through barrier
  5. loud sound other than speech heard through a barrier
A
  1. STC 25
  2. STC 30
  3. STC 35
  4. STC 42-45
  5. STC 46-50
20
Q

A20 - What is the Inverse Square Law?

A

sound intensity = inversely proportional to square of distance to source

21
Q

Decibles and hearing?

  1. What is the measure in dB of the threshold of human hearing
  2. What increment of dB is and is not noticeable?
A
  1. zero dB
    1. 1 dB is not noticeable
    2. 5 dB is noticeable
22
Q

In what range of Hz does human conversation occur?

A

125Hz - 8000Hz

23
Q

What relationship does TL (transmission loss) have to NR (noise reduction)?

A

NR = TL(db)

24
Q

What is the function of noise criteria curves?

What is the PNC (preffered noise criteria) for each of the following spaces:

  1. concert hall
  2. bedroom
  3. lobbies
  4. kitchens
A

​Balanced Noise Criteria (NCB) curves are used to specify acceptable background noise levels in occupied spaces and include noise from air-conditioning systems and any other ambient noise. They are intended to replace the NC curves.

  1. 12-20 dB (concert hall)
  2. 20-30 dB (bedroom/hospital/aptmt)
  3. 40-45 dB (lobbies/labs)
  4. 45-55 dB (kitchens/light maint. shops)
25
Q

What is the measure of material absorption and what values reflects absorptive/reflective materials

A

a = coefficient of absorption (ratio of intensity)

**NRC(noise reduction coefficient)

<0.2 = REFLECTIVE

>0.2 = ABSORPTIVE

26
Q

What is sound absorption useful for in sound control? (4)

A
  1. prevent sound reflection
  2. reduce sound intensity within space
  3. improve speech privacy
  4. decrease/enhance reverberation
27
Q

Reverberation affects the intellgibility of speech & music. Since each space has it’s own ideal reverberation time, what is the general rule for small spaces vs. large ones.

A
  1. small space = shorter reverb time
  2. large space = greater reverb time

examples:

  • 1.5-1.8s = auditorium
  • 0.6-0.8s = elem. classroom
  • 0.3-0.6s = office/small room for speech
28
Q

What has the greatest impact on controlling sound transmission in a wall assembly?

What are the 2 main ways of acheiving this with a wall assembly.

A

Isolate GWB

  1. Staggered Studs
  2. Double Wall
29
Q

When looking to control sound transmission, what should not be done, as it has no impact on sound transmission.

A
  1. inc. gwb @ center or assembly (actually reduces cavity size)
  2. inc. batt insulation - not beneficial at all
30
Q

List 4 ways to alter a wall assembly to impact sound transmission, other than isolation of GWB.

A
  1. Increase Mass
    • 2xGWB will increase STC by 10points!
  2. Add Sound Absorbing Material
    • will increase STC by 10pnts in a stag or double wall
  3. Increase Stud Spacing
    • 400mm-600mm spacing on stag or double wall will increase StC by 1or2 pnts
  4. Include Resilient Channels
    • good for load bearing studs
31
Q

Enhance the transmission loss (TL) rating: separation into layers?

A
  1. separation into layers
  2. mass
  3. absorptive capacity
32
Q

What is transmission loss (TL)?

A

Measure of the performance of a construction assembly in preventing transmission of airborne sound = reduction in sound as it passes through.

Sound transmission class (STC) is the rating of this performance.

33
Q

What are 4 ways to control mechanical noise?

A
  1. spec quiet equip
  2. block flanking paths by plenum spaces and line ducts
  3. use inertia blocks (heavy concrete) to min. vibration
  4. set upon resilient blocking to isolate from structure
34
Q

Define impact noise and the associated system commonly used to measure it.

A

Structure borne sound generated by impact:

  • footsteps
  • moving furniture

​Impact Insulation Class (IIC)

  • single # rating prevention of transmission of impact noise in ceiling/floor construction
  • higher IIC = lower sound transmission
35
Q

How can Impact Noise be improved? (3)

A
  1. carpet /rsf install
  2. suspended ceilings
  3. conc. slab floated on fibreboard laid on struct. slab.

EXAC EXAM 3 (14 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions