Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

A320 Systems > INDICATING / RECORDING > Flashcards

INDICATING / RECORDING Flashcards

1
Q

Q 01: What does a pulsing green engine parameter indicate?
A: An ADVISORY, the parameter is about to reach the limit.
B: An ADVISORY, the parameter is out of the limits
C: A MEMO, the parameter has a faulty indication.
D: A level 3 failure requiring immediate crew action.

A

A: An ADVISORY, the parameter is about to reach the limit.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Q 02: On a bottom of the STATUS page, what does the green arrow mean?
A: It is a reminder to land as soon as possible.
B: It indicates that there is a system page behind.
C: It means that there is more information to be seen.

A

C: It means that there is more information to be seen.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Q 03: When should the EMER CANC push button be used?
A: At the completion of an ECAM procedure for an abnormal procedure.
B: Whenever a LEVEL 3 warning or LEVEL 2 caution occurs.
C: Whenever a repetitive visual or aural warning, or caution is received that the crew has determined to be false.

A

C: Whenever a repetitive visual or aural warning, or caution is received that the crew has determined to be false.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q 
Q 04: The actual speed is indicated by the \_\_\_\_\_\_ reference line. 
A: yellow 
B: amber 
C: red 
D: white
A

A: yellow

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Q 05: If a PFD fails, does anything happen automatically?
A: The ATT HDG switch must be used on the switching panel in order to recover PFD information.
B: The image automatically transfers to the display formerly occupied by the ND.
C: The image automatically transfers to the UPPER ECAM.
D: It has to be manually activated.

A

B: The image automatically transfers to the display formerly occupied by the ND.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Q 06: Course information from the #1 ILS receiver will be displayed:
A: On the captain’s PFD when the captain’s ILS push button is selected ON.
B: On the FO’s PFD when his ILS push button is selected on and on the captain’s ND, when the captain’s ND is selected to ILS ROSE.
C: On the captain’s PFD and ND when the captain’s ILS push button is selected ON.
D: The first two statements are correct

A

A: On the captain’s PFD when the captain’s ILS push button is selected ON.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Q 07: Information from the #1 VOR receiver will be displayed:
A: On the capt’s PFD when the captain’s VOR bearing selector is selected to VOR.
B: On the capt ‘s ND when the capt ‘s VOR bearing selector is selected to VOR.
C: VOR #1 course information is available on the captain’s PFD and ND when the captain’s ILS pb is selected ON.

A

B: On the capt ‘s ND when the capt ‘s VOR bearing selector is selected to VOR.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Q 08: What causes a display unit (DU) to go blank?
A: Loss of power.
B: Display unit internal failure.
C: Both are correct.

A

C: Both are correct.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Q 09: What causes a DU to display a black screen with a white diagonal line?
A: DMC failure.
B: No power.
C: Both are correct.

A

A: DMC failure.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Q 10: The maximum speed to select next higher flap setting is indicated by two amber dashes.
A: True.
B: False.

A

A: True.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Q 11: VOR, ILS, and NDB raw data information is displayed on the ND in which of the following modes?
A: VOR, RMI and NDB information may be displayed in the ARC or ROSE NAV modes.
B: VOR and ILS information can be displayed in the ROSE VOR and ROSE ILS modes respectively
C: Both are correct

A

C: Both are correct

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Q 12: The presence of VOR1 in red on the ND indicates:
A: The VOR station currently tuned is out of range.
B: The VOR station currently tuned is out of service.
C: The # 1 VOR receiver is inoperative.
D: The VOR station currently tuned is out of range.

A

C: The # 1 VOR receiver is inoperative.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q 
Q 13: What is the meaning of “9000” in blue at the top of the altitude scale? 
A: It marks the FCU selected altitude. 
B: It marks the airfield elevation. 
C: It marks the transition altitude. 
D: It marks the decision height.
A

A: It marks the FCU selected altitude.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q 
Q 14: How many DMC’s are there? 
A: 1 
B: 2 
C: 3 
D: 4
A

C: 3

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Q 15: After a single DMC failure, how could a crew member recover the display units?
A: It is done automatically.
B: Once a DMC has failed, the information is unrecoverable.
C: Rotate the EIS DMC switch on the switching panel to replace the failed DMC with DMC #3.

A

C: Rotate the EIS DMC switch on the switching panel to replace the failed DMC with DMC #3.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Q 16: Where is information displayed by DMC #1 and DMC#2?
A: DMC#1 supplies data to PFD#1, ND#1, and lower ECAM. DMC #2 supplies data to PFD#2, ND#2, and upper ECAM.
B: DMC#1 supplies data to PFD#1, PFD#2, and upper ECAM. DMC #2 supplies data to ND#1, ND#2, and lower ECAM.
C: DMC#1 supplies data to PFD#1, ND#1, and upper ECAM. DMC #2 supplies data to PFD#2, ND#2, and lower ECAM.
D: DMC#1 supplies data to PFD#1, ND#2, and lower ECAM. DMC #2 supplies data to PFD#2, ND#1, and upper ECAM.

A

C: DMC#1 supplies data to PFD#1, ND#1, and upper ECAM. DMC #2 supplies data to PFD#2, ND#2, and lower ECAM.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Q 17: If the lower ECAM DU fails, is there a way to retrieve that information?
A: By pressing and holding the related systems page push button on the ECAM control panel, the page will be displayed on the UPPER ECAM.
B: By rotating ECAM/ND XFR switch on switching panel, lower ECAM page will be transferred to either Capt or FO’s ND.
C: Both are correct.

A

C: Both are correct.

18
Q

Q 18: If the UPPER ECAM DU fails, what will be displayed on the lower unit?
A: System display page.
B: Engines and Warning page (E/WD)
C: Status page.

A

B: Engines and Warning page (E/WD)

19
Q 
Q 19: Weather radar can be displayed in what modes on the ND? 
A: ARC and ROSE NAV modes only. 
B: ROSE VOR and ROSE ILS modes. 
C: ROSE VOR and ROSE ILS modes. 
D: All modes except plan.
A

D: All modes except plan.

20
Q 
Q 20: RNAV position information is displayed on the ND in which of the following modes? 
A: ARC and ROSE NAV modes only. 
B: ROSE VOR and ROSE ILS modes. 
C: ARC, ROSE and PLAN modes. 
D: ROSE VOR mode.
A

A: ARC and ROSE NAV modes only.

21
Q

Q 21: Once the crewmember has completed viewing a specific system, what is the correct procedure for clearing the screen and returning it to a normal presentation?
A: Press the respective system push button again.
B: It goes away by itself
C: Press CLR on the ECAM control panel.
D: Press twice CLR on the ECAM control panel.

A

A: Press the respective system push button again.

22
Q

Q 22: After the engine shutdown, you observe a pulsing STS message. What does it mean?
A: It is an indication that at least one system requires crew attention.
B: It is an indication that the aircraft has not been shut down correctly.
C: It is a reminder that the status page holds a maintenance message.

A

C: It is a reminder that the status page holds a maintenance message.

23
Q

Q 23: The upper ECAM Display Unit (DU) has failed. You want to see the DOOR/OXY page. How can you see it?
A: You have to press and hold the DOOR key on the ECP
B: You have to switch the EIS DMC to CAPT3
C: You have to press and hold the RCL key on the ECP.

A

A: You have to press and hold the DOOR key on the ECP

24
Q

Q 24: Both ECAM screens have failed. Is it possible to get E/WD indications?
A: Yes, the E/WD is automatically transferred to one of the NDs.
B: No. The E/WD is lost until the aircraft can be repaired.
C: Yes, to get E/WD information. It must be manually transferred to one of the NDs.
D: Yes. E/WD information is automatically transferred to the the F/O’s PFD in the event of an ECAM warning.

A

C: Yes, to get E/WD information. It must be manually transferred to one of the NDs.

25
Q 
Q 25: How are the FMAs displayed on the PFD? 
A: There are 5 columns and 3 rows. 
B: There are 3 columns and 5 rows. 
C: There are 3 columns and 2 rows. 
D: There are 4 columns and 2 rows.
A

A: There are 5 columns and 3 rows.

26
Q

Q 26: In case of a double FWC failure master caution light, master warning light, aural warnings and ECAM cautions and warnings are lost.
A: True.
B: False.

A

A: True.

27
Q

Q 27: How did the PNF cancel the caution for the NAV ILS 1 FAULT before calling the STATUS page on the ECP?
A: By pressing the EMER CANC pushbutton.
B: By pressing the CLR key
C: By pressing the STS key
D: By pressing the ALL key.

A

A: By pressing the EMER CANC pushbutton.

28
Q

Q 28: How can the ILS 1 FAULT be restored from being a CANCELLED CAUTION?
A: By resetting the appropriate circuit breaker.
B: By pressing and holding any CLR key for more than 3 seconds.
C: By pressing the EMER CAN pushbuttton for more than 3 seconds.
D: By pressing and holding the RCL key for more than 3 seconds.

A

D: By pressing and holding the RCL key for more than 3 seconds.

29
Q

Q 29: VLS is the lowest speed that the autoflight system (autopilot or A/THR) will fly the aircraft. This is a dynamic speed corresponding to an Angle Of Attack (AOA).
A: VLS will change with wing configuration change.
B: With speedbrake extension, VLS will increase
C: Above FL200, VLS will provide a 0.2g buffet margin
D: All of the above.

A

D: All of the above.

30
Q 
Q 30: The Speed Trend Arrow is a dynamic information displaying the speed to which the aircraft will be in \_\_\_\_\_. 
A: 5 seconds. 
B: 8 seconds 
C: 10 seconds 
D: 13 seconds.
A

C: 10 seconds

31
Q

Q 31: Of the three types of EIS displays, which one has the lowest priority?
A: The ND
B: The PFD
C: The SED

A

A: The ND

* There is no SED display. If they mean SD then this should have the least priority.

32
Q

Q 32: As you approach a selected altitude, when will the yellow altitude window start flashing?
A: As you approach within 750 ft of FCU selected altitude and stop when it is within 250 ft.
B: As you approach within 1000 ft of FCU selected altitude and stop when it is within 150 ft.
C: As you approach within 500 ft of FCU selected altitude and stop when it is within 150 ft.
D: As you approach within 900 ft of FCU selected altitude and stop when it is within 200 ft.

A

A: As you approach within 750 ft of FCU selected altitude and stop when it is within 250 ft.

33
Q

Q 33: The Flight Path vector (FPV) represents the lateral and vertical trajectory of the aircraft with respect to the ground. On the lateral scale, it indicates the aircraft’s track. On the vertical scale, it indicates the aircraft’s flight path angle
A: True.
B: False.

A

A: True.

34
Q

Q 34: When does the Side Stick Order indicator display?
A: After first engine start and disappears when passing 400 feet RA
B: After first engine start and disappears after rotation
C: After second engine start and disappears when passing 400 feet RA
D: After second engine start and disappears when passing 400 feet RA

A

B: After first engine start and disappears after rotation

35
Q

Q 35: When is the ‘Green Dot’ displayed?
A: Only when flap handle is the zero position.
B: Only when flap handle is the zero position, above FL80
C: Only when flap handle is the zero position, below FL80
D: Only when flap handle is the zero position, below FL85

A

A: Only when flap handle is the zero position.

36
Q

Q 36: The green ‘S’ of the speedtape is the Minimum Slat Retraction Speed. It is only displayed when the flap handle position is in position 1
A: True.
B: False.

A

A: True.

37
Q

Q 37: Is the Side Slip indicator always yellow?
A: Yes.
B: No, it turns blue when it becomes a beta target (displaying optimum side slip for a given configuration)
C: No, it turns orange when it becomes a beta target .

A

B: No, it turns blue when it becomes a beta target (displaying optimum side slip for a given configuration)

38
Q

Q 38: When will the Flight Director bars flash?
A: When a reversion occurs.
B: When loss of LOC or G/S signal in LAND mode.
C: All of the above.

A

C: All of the above.

39
Q

Q 39: The Flight Director bars are out of view when Bank angle exceeds 67°.
A: True
B: False.

A

B: False.

* Out of view when bank angle exceeds 45° (and will return when bank is < 40°)

40
Q 
Q 40: The Glide slope index will flash continuously when the deviation exceeds \_\_\_\_\_\_ above \_\_\_\_\_\_, 
A: 1/2 dot below 120 feet RA 
B: 1 dot above 100 feet RA 
C: 1 dot above 60 ft RA 
D: 1/2 dot below 100 feet RA.
A

B: 1 dot above 100 feet RA

* Match 1 and 1

41
Q

Q 41: When will the PFD Heading tape revert to TRUE heading?
A: North of 73° North or South of 60° South
B: South of 73° North or North of 60° South.
C: North of 80° North or South of 73°South
D: North of 78° North or South of 78°South

A

A: North of 73° North or South of 60° South

A320 Systems (7 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions