Flows

Question 1

RP BEFORE START

Answer 1

Final Walk-Around - Completed
Doors - Check
Fuel - Check
Transponder - ATC ALT / [Flight ID] Check
Passenger Count - Review and announce

Question 2

RP AFTER START

Answer 2

APU - Gen off
Annunciators / Engine Indications - Check
CABIN DOOR - Extinguished
AAD - Set
V-Speeds - Set
HEADING - Rwy Heading
COURSE 1/2 - Set
TCAS - Displayed
APU-Gen on
APU-Off

Question 3

RP BEFORE HOLD SHORT

Answer 3

Initial Departure Actions - Review and acknowledge
Min Fuel - Verify
Transponder - TA/RA
ANTI-ICE/DEICE- As required
FLAPS - 15 indicated
Configuration - Check
Cabin - Secure

Question 4

PM AFTER TAKEOFF FLOW

Answer 4

DONE AFTER FLAPS 0 CALLED FOR

LANDING GEAR - UP
lights to taxi
YD - ENGAGE
FLAPS - 0

Question 5

Climbing Through 10,000

Answer 5

APU OFF

Question 6

Climbing Through FL180

Answer 6

All lights off besides nav and anti coll
“Standard set”

Question 7

Cruise

Answer 7

PM: Altimeters, Fuel
PF: Altimeters, Request- Cruise checklist

Question 8

Approach: Descending though 180

Answer 8

APPR CHECKLIST
REC/TAXI ON

PF: L&R ignition on, request app. Checklist

PM: go around n1, L&R ignition on(verify), fuel, app speeds, landing field elevation set, pass safety on, flight guidance set, efbs

Question 9

Descending through 10,000

Answer 9

PM: pass safety on, lav door

Question 10

PM Cleared for TAKEOFF

Answer 10

Landing lights
Strobes
Pass safety cycle
Pitot static heat

Question 11

RP AFTER LANDING

Answer 11

WHEN CLEAR
landing lights off, strobes off, taxi on
Transponder ATC ALT
Radar off
P/S heat off
Anti ice/deice off
Flaps 0
Speed brake retract

Question 12

ENGINE FAIL after V1

Answer 12

Engine failure
Pm-rotate
Pm-pos rate
Pf-gear up
Pm-fra
Pf-flaps zero
Pm-flaps zero selected
Reaching esa INFLIGHT ENGINE SHUTDOWN QRC

Question 13

OEI visual approach

Answer 13

Pf-engine inop approach QRC
Pf-flaps 15
Pm-flaps 15 selected
Pf-gear down, engine inop landing QRC
Pm-3 green
Pm-500 stable or 500 unstable
Pf-landing or go around power set