Electromagnetism Flashcards

1
Q

What is magnetism? What causes it?

A

The movement of electric charges.

A moving charge is surrounded by a magnetic field. Current flowing in a wire is a cause of a magnetic field. Electrons orbiting and spinning around nucleus and the medium surrounding the moving charges cause magnetism.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Explain how permanent magnets work? Talk about poles.

A

Non-magnetic material-the magnetism caused by different electrons cancel each other out.

Permanent magnets-have no cancellation as the magnetic fields due to moving electrons align themselves and form magnetic domains in the same direction. Permanent magnets have two poles that exist in pairs, a north and a south. If the magnet is broken in half, each part will have a north and south..

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Explain Earth’s magnetic field.

A

Earth’s magnetic field is due to currents in the molten lava within the Earth. It resembles a large bar magnet with the North Pole in the Southern Hemisphere and the South Pole in the Northern Hemisphere.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Which type of pole does a current flowing clockwise give?

A

South Pole is clockwise.
North Pole is anticlockwise

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What is the direction of magnetic field lines?

A

Always go from North Pole to South Pole.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Explain the right hand thumb rule stating first what it is used for?

A

Used to the find the direction of magnetic field lines using direction of conventional current.

Thumb of right hand represents direction of convention current and fingers represent direction of magnetic field lines.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Define the force in a magnetic field. Give the formula when not perpendicular.

A

F = ILB (I=current, L=length of conductor in magnetic field, F=Force, B=magnetic flux density)

F=ILB sin (pieta)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Define magnetic Flux Density.

A

B = F / IL (B=magnetic flux density, F=Force on a conductor, I=current, L=Length of conductor in magnetic field.)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Define the unit of the Tesla.

A

1 Tesla = 1 Newton / 1 Ampere x 1 metre

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Explain Fleming’s Left Hand Rule and first what you use it for.

A

The direction of the force can be obtained with direction of magnetic field and current.

Thumb represents direction of force, index finger of magnetic field and middle finger represent current.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Explain why a charged particle moving in a magnetic field moves in circular motion.

A

The force is perpendicular to the velocity and the flux density. If the force is centripetal force than this is the same principle as circular motion where objects doesn’t change magnitude of velocity but still accelerates

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What is the formula for the force on a single charge in a magnetic field?

A

F = qvB (F=Force, q=charge, v=velocity, B=magnetic flux density)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Differentiate between the force between two current carrying conductor when the batteries are in the (a) same direction and (b) opposite direction.

A

Current flow in the same (opposite) direction in two parallel conductors.
The magnetic fields cancel (add-up) between the two conductors as the directions of the magnetic fields are the opposite (the same)
There is now a weak (strong) magnetic field between the conductors.
Magnetic fields on the outer side of the conductors are stronger (weaker)

The stronger magnetic fields push the conductors into the regions of the weaker magnetic fields. So in (a) the conductors attract each other and in (b) the conductors repel each other.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Explain how a motor works.

A

The left hand side of the coil is forced inwards and the right hand side of the coil is forced outward. These two forces cause the coil to turn in circular motion.
As the magnetic field is uniform these two forces are equal in magnitude, opposite in direction.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Give the formula for moment of a force in a motor. Give the formula for moment of a couple in a motor

A

M = ILB x the perpendicular distance between wire an axis (radius of inner cylinder)
T = ILB x the perpendicular distance between two wires (diameter of inner cylinder)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Define electromagnetic induction.

A

Is when a change in magnetic flux induces an emf.

17
Q

Define magnetic Flux.

A

Ø (phi) = BA

Magnetic Flux = Magnetic Flux Density x Area

18
Q

Define the unit of electromagnetic induction.

A

1 Weber = 1 Tesla x 1m2

19
Q

State Faraday’s Law.

A

If the magnetic flux lines passing through a circuit change than an emf is induced proportional to the rate of change of magnetic flux passing through the circuit.

20
Q

Formula for emf/Faraday’s Law.

A

emf = -N(dØ/dt)

(Negative sign has no purpose in maths Q’s)

21
Q

State Lenz’s Law.

A

The induced emf makes a current flow in such a direction as to oppose the change that caused it.

22
Q

What is the frequency of the mains?

A

50 hertz

23
Q

What does RMS stand for? What is the formula for RMS voltage?

A

Root mean Squared.

V rms = V0 / root 2
(RMS Voltage = Peak Voltage over root 2)

24
Q

What type of induction do transformers use? Differentiate between step-up and step-down transformer.

A

Mutual induction.

A large number of turns of wire in the secondary circuit compared to primary will give greater voltage in step-up transformer.
A smaller number of turns of wire in the secondary circuit compared to primary will give a weaker voltage in step-down transformer.

25
Q

Give the formula for transformers,

A

V(i) / V(o) = N(p) / N(s) = I(o) / I(i)

26
Q

What are eddy currents?

A

Eddy currents generate heat in iron core. This heat loss is reduced by laminating the iron core. Laminated iron gets looses and release energy in the form of a hum instead.

27
Q

Give two uses of transformers.

A

Mobile phone rechargers
Old cathode ray tube T.V. sets

28
Q

Explain how self induction works with an a.c. source.

A

In a.c. current is constantly changing direction which gives changing magnetic flux. This induces a emf in the solenoid that opposes the voltage of the source. Lowering the resultant voltage.

29
Q

Formula for resultant voltage and involving back emf.

A

Resultant Voltage = source voltage - back emf

30
Q

What effect on self induction of an a.c. source do the following factors have? (a) frequency (b) number of turns (c) iron core.

A

Self induced emf is greater
Resultant voltage is less
Resultant current is less
The brightness of the lamp decreases

31
Q

Give an application of the principle of induction.

A

A dimmer switch

32
Q

Explain how self-induction works with a d.c. source.

A

As switch is initially closed it takes a very small interval of time for the current to reach its constant value. Change in magnetic flux induces emf which due to the iron core is big enough to light bulb briefly. Same occurs when switch is opened.

33
Q

Define magnetic field.

A

Is the region where a magnetic force acts.

34
Q

What is the effect on sound produced with increased number of turns in coil?

A

Louder sound with greater amplitude.