Mock Prep: Questions You Got Wrong Flashcards
Explain two things to ensure when carrying out a chromatography test to test the substances in ink. And explain why
1)baseline should be above the water, so that the inks do not dissolve into the water
2)baseline should be drawn in pencil not pen, otherwise pen could contaminate the results, whereas pencil would not interfer
Give a property of hydrogen that makes it suitable for an airship
Low density
Explain why helium is used instead of hydrogen in airships
Because helium is inert, whereas hydrogen is flammable
State two observations in the displacement reaction between magnesium and copper sulfate:
Blue copper sulfate solution turns colorless as magnesium sulfate is formed
A pink brown solid of copper is formed
Explain how graphite can conduct electricity
It has delocalized electrons
which are free to flow
Throughout the structure
And conduct electricity
Explain why diamond is hard but graphite is soft
Because diamond has a rigid lattice structure whereas
graphite is arranged in layers which can Slide Over each other
(This has nothing to do with the fact that they are both giant covalent substances.giant covalent just means that the atoms can go on an on in the structure, and that there are no molecules)
Difference between simple molecular and giant covalent structures
Simple molecular substances consist of molecules in fixed numbers
But giant covalent have no molecules, just atoms in structures, which can vary in number
State how many carbon atoms each one single atom is joined to, in
Diamond:
Graphite:
Diamond: each carbon atom joined to four other carbon atoms
Graphite: each carbon atom joined to three other carbon atoms
Balance the equation:
C2H4 + HCL + 02 —-) C2H4Cl2 + H20
2…4…1 —-)2…2
When pentane reacts with bromine, give the chemical formula of the two products formed
Bromopentane + hydrogen bromide
C5H11Br + HBr
Remeber that for bromopentane, one atom of hydrogen is replaced therefore it goes from H12 to H11.
Methane is burnt with a Bunsen burner and is connected to a U tube, surrounding by ice. Explain why water collects in the Utube
In the combustion of methane, carbon dioxide and water VAPOUR are formed.
So the gas thus condenses into a liquid
Write the chemical equation of the reaction taht occurs when an excess of carbon dioxide is added to calcium hydroxide
CO2(g)+ CaCO3(s) + H2O(l)—) Ca(HCO3)aq
Write the chemical reaction of when carbon dioxide turns limewater cloudy
CO2(g) + Ca(OH) aq—-) CaCO3(s) + H2O(l)
Explain how you know an endothermic reaction has taken place
Temperature of reaction decrease
As energy is taken in FROM surrounding
Equation for enthalpy change:
Molar enthalpy change= heat energy change(kj)/ number of moles of that substance (mol)
Explain if the enthalpy change is positive or negative for an endothermic reaction
Negative
Because the products have more energy than the reactants
This is because Energy is taken in form the surroundings
When measuring rate of reaction between magnesium and hydrochloric acid, give two reasons why the volume of gas collected may be less than the volume expected
-Some gas may have escaped whilst putting the rubber bung on
-the magnesium may be impure
In the reaction between magnesium and hydrochloric acid, explain why it isn’t necessary to measure the hydrochloric acid with a measuring cylinder
Because the hydrochloric should be in excess so a precise measurement is not required
Explain how a decreased concentration of ions, in the reaction between magnesium and hydrochloric acid, decreases the rate of reaction
-less ions in the same volume
-therefore less frequent successful collisions
-per second
-so rate of reaction decreases
Stage 1 pour 50 cm
3 of dilute sulfuric acid into a beaker
Stage 2 warm the acid using a Bunsen burner
Stage 3 add a small amount of copper(I) oxide to the warm acid and stir the mixture
Stage 4 add further amounts of copper(I) oxide until copper(Il) oxide is in excess
Stage 5 filter the mixture
Stage 6 obtain crystals from the filtrate
Explain why in stage five the mixture is filtered
To remove the Excess solid, which is copper (ii)oxide from the solution,
So that you can obtain the copper (ii) sulfate solution
Explain how you can obtain a pure dry sample of a salt solution 6 marks
1)Heat in an evaporating basin to evaporate SOME of the water
2)keep heating until crystals are formed, which you can test with a glass rod
3) leave to cool,to form proper crystals(bc less soluble in cool temperatures)
4)remove the crystals by filtration
5)dry by leaving in a warm oven , to evaporate rest if the water
6)pat dry with a towel
State what colourless the reaction will turn, when aqeous solution of chlorine reacts with aqeous soltuion of potassium bromide, and why
Turn orange because bromine is displaced by more reactive chlorine
What color is iodine
Grey solid