5-5-2 Heat Stress Monitoring Program Flashcards

1
Q

What is Heat Stress?

A
  • Combo of Air Temp, Thermal Radiation, humidity, airflow and work load which stress the body as it attempts to regulate temp.
  • Can cause heat injury or DEATH
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Environment Factors Causing Heat Stress

A

Thermal Radiation
- The Sun and heat sources aboard ship
Ventilation - Airflow
- Forced Air Systems - Intake of outside air
(a) Spot-Cooling
- Forced Exhaust - Removes fumes
(a) Red Devil Blowwers
Humidity
- Steam Leaks
- Bilge Water
- Condensation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Define Acclimatization

A

The fact of being accustomed to temperature or new environment.
- Usually within 3 weeks or more

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Personal Factors Associated with Heat Stress

A
  • Past heat injuries will affect adaptability
  • Current health status or meds may alter physiological body changes; G6PD or Sickle Cell
  • Exercise and fluid intake, meds, alcohol, sleep
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Common Locations of Heat Stress Conditions

A
  • Machine Spaces
  • Laundry Rooms
  • Sculleries (PHEL V)/ Galley
  • Incinerator Room (Trash Room)
  • Flight Decks
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Causes of Heat Stress Conditions

A
  • Steam and Water Leaks
  • Boiler Casing Leaks
  • Missing/Deteriorated Thermal Insulation
  • Ventilation Deficiencies
  • Weather
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

PHEL Chart

A

Physiological Heat Exposure Limit
- Set of SIX curves that compare the WGBT index and degree of effort or work rate to determine the max permissible exposure to heat stress
- Work rates established by IH and NAVSEA
- IH determines Heat Stress Conditions locations, OPNAVINST 5100.19 for reference

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Routine/Non-Routine Operations

A

Routine Ops
- Light work , ie sweeping, painting, etc.
Non-Routine Ops
- Use higher PHEL when determine stay time. For example, ventilation being secured

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Describe ECC Exercises/Heavy Work Load

A
  • Evacuation Control Center Drills
  • Heavy Work Load
    Replacing large valves
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Stay Time/Recovery Time

A

Stay Time
- Maximum allowable personnel may work in heat stress conditions
Recovery Time
- Twice of stay time or 4 hours, whichever is shorter

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Describe Fuel Combination Gases (Stack Gases) and List Signs and Symptoms of exposure

A

Gases that may accumulate in a space due to inadequate ventilation or machine malfunction

Signs and Symptoms
- Watery Eyes
- Dyspnea
- Numbness or Tingling of the tip of tongue, nose or finger/toe tips
- Mild sensation of alcohol intoxication

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Heat Stress Training Requirements

A
  • MDR will provide training for all NEWLY reporting personnel, annually after

Training Must Include
- Hazards
- Symptoms oof exposure
- Heat stress first aid, monitoring and causes

Heat Stress Monitors receive training within 12 weeks upon assignment

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Requirement for Reporting Heat Stress

A
  • Report using an A&I Report
  • Report to Naval Safety Center through WESS
  • All heat stress injuries reported to Naval Disease Reporting System (NDRS)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Heat Stress Survey

A
  • All monitoring reports reviewed by SMDR and SMDR will make recommendations on crew health status
  • Routine reports where no administrative controls are required , submit at 8 o’clock reports
  • ALL REPORTS MAINTAINED BY SMDR FOR 1 YEAR
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Dry Bulb Thermometer

A

Function:
- Measures ambient air temp at work sites where heat stress exists
Placement:
- Permanently mounted at watch and work stations
- Must be properly shielded from radiant heat levels
Accuracy:
- Must be within 5 degrees Fahrenheit of the WGBT meter
Reading of DB Temps:
- Every 4 hours if spaces do not exceed 85 F
- Read hourly IF:
(a) Heat Cas
(b) DB temp over 85 F
High Temps
- Circle in RED for 100 F or higher DB temps

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Heat Stress Meter Measures what?

A

Dry Bulb (Ambient)
Wet Build (Humidity)
Globe (Radiant)
WGBT Index
- Measures Heat Stress, weighted average of DB, WB, Wet Bulb and Globe temps

Equation
- (0.1 x DB)+(0.7 x WB)+(0.2+GT)

17
Q

Different PHELs Required Monitoring Conditions

A

PHEL 1-3
- 4 hours or less, DB equal to or greater than 100 F
PHEL 1-3
- Greater than 4 hours, DB equal to or greater than 90 F
PHEL 4-6
- DB is equal to or greater than 85 F

During a drill set that exceeds 3 hours

18
Q

WBGT

A

Wet Bulb Globe Temp

RSS-220 WGBT Meter
- Acceptable range is + or - 0.2 degrees F, if meter is operating properly
- Hold 1 foot from bosy

QUESTemp 48N Heat Stress Monitor
- If voltage is less than 6.4 replace or recharge batteries
- First measurement done in 10 minutes to equilibrate to surrounding area.
- If meter is moved, wait 5 mins for stabilization
- Hold 18 inches from body, chest level

19
Q

AHSS

A

Automated Heat Stress System
- Mounted for most accurate temp of the area
- Calibration not required

20
Q

Recording Readings WBGT

A

ALL WGBT readings recorded and following is documented
- Hanging DB Temp
- WBGT readings to include DB, WB, GT and WGBT index
- Availability of water
- Circle in red all exposure limits less than the watch period

21
Q

Routing of Heat Stress Survey

A

Immediately Notify Supervisor
Supervisors (DH) notify the CO with
- Condition
- Personal Protective Measures
- Action to reduce heat
(a) All noted on Heat Stress Monitoring Sheet