Communications

Question 1

To extinguish the SELCAL light on VHF2 the captain must:

a. select the VHF2 transmission key

b. select the ON VOICE push button

c. push the RESET push button

Answer 1

c. push the RESET push button

Question 2

If RMP1 fails:

a. VHF1 can be tuned by RMP2 only

b. VHF1 can be tuned by RMP2 and RMP3

c. VHF1 cannot tuned

Answer 2

b. VHF1 can be tuned by RMP2 and RMP3

Question 3

RMP1 can tune:

a. VHF1 and VHF2 only

b. VHF1 only

c. any VHF

Answer 3

c. any VHF

Question 4

With the Audio Switching Selector in CAPT ON 3 position:

a. the captain can only receive on VHP3

b. the FO radio is unusable

c. the captain uses his acoustic equipment and the third occupant ACP

Answer 4

c. the captain uses his acoustic equipment and the third occupant ACP

Question 5

The CIDS provides for:

a. long range HF communication

b. public address announcements

c. communication with the mechanic in the nose wheel well

Answer 5

b. public address announcements

Question 6

If CIDS is lost, which of the following will be inoperative?

a. PA system and cabin/cockpit interphone

b. communications with mechanic in nose wheel well

c. SELCAL system

Answer 6

a. PA system and cabin/cockpit interphone

Question 7

To enable communication with a mechanic at the number 2 engine during manual start valve operation, the pilot must:

a. select INT on the INT/RAD switch and the INT reception knob

b. select the CAB transmission key and the reception knob

c. relay with a second mechanic at the nose wheel well

Answer 7

b. select the CAB transmission key and the reception knob

Question 8

To make a PA announcement the pilot can:

a. use the ON VOICE push button

b. select CAB transmission key and use the boom mike

c. use the cockpit handset on the pedestal

Answer 8

c. use the cockpit handset on the pedestal

Question 9

To extinguish the ATT call light the pilot should:

a. push the RESET button

b. answer the call from the cabin

c.press the appropriate button on the overhead CALLS panel

Answer 9

a. push the RESET button

Question 10

To test the CVR during preflight the pilot should turn on the CVR with the RCDR GND CTL pb, push the test button and :

a. check for one green in the LED sequence

b. check for all green in the LED sequence

c. check for one red in the LED sequence

Answer 10

a. check for one green in the LED sequence

Question 11

The cockpit voice recorder records announcement on the passenger address system provided PA reception knob is selected on:

a. the Captain’s ACP

b. the Third occupant’s ACP

c. the Fourth occupant’s ACP

Answer 11

b. the Third occupant’s ACP

Question 12

To erase the CVR tape the aircraft must:

a. have all the engines shut down

b. be operating on external power only

c. be on the ground and parking brake ON

Answer 12

c. be on the ground and parking brake ON

Question 13

A SELCAL gives visual and aural indications:

a. to the ground mechanics when they are called by the crew

b. to the flight attendants when they are called by the crew

c. to the crew when they are called by a ground station

Answer 13

c. to the crew when they are called by a ground station

Question 14

The cabin interphone system provides communication:

a. between the flight crew and the cabin stations

b. between the flight crew and the ground station

c. between the ground station and the cabin attendant stations

Answer 14

a. between the flight crew and the cabin stations

Question 15

The passenger address provides voice announcements:

a. only from the cockpit to the cabin passengers

b. from the cockpit to the flight attendant stations

c. from the cockpit and the flight attendant stations to the cabin passengers

Answer 15

c. from the cockpit and the flight attendant stations to the cabin passengers

Question 16

On the overhead panel, when the EVAC panel toggle switch is in the CAPT and PURS position:

a. the alert cannot be activated from the cabin

b. the alert maybe activated from the cabin only

c. the alert maybe activated from either cockpit or cabin

Answer 16

c. the alert maybe activated from either cockpit or cabin

Question 17

On the ACP1, the VHF 1 annunciator light illuminate green and the INT’s MECH lite illuminate amber. When the Captain wishes to answer the mechanic’s call, he can talk to the mechanics by:

a. using the handset located on the pedestal

b. placing the sidestick radio selector in the aft position

c. placing the INT/RAD switch in the INT position

Answer 17

c. placing the INT/RAD switch in the INT position

Question 18

If the Captain selects VHF 2 on RMP 1:

a. only the SEL light on RMP 1 will illuminate

b. only the SEL light on RMP 2 will illuminate

c. the SEL lights on RMP 1 and RMP 2 will illuminate

Answer 18

c. the SEL lights on RMP 1 and RMP 2 will illumunate

Question 19

With the INT/RAD switch on the Audio Control Panel in the INT position and the sidestick radio selector in the radio position, you are transmitting on the:

a. intercom at all times

b. radio selected by the left-most reception knob on the audio control panel

c. radio selected by the transmission key on the ACP

Answer 19

c. radio selected by the transmission key on the ACP