Mass transport in animals Flashcards

1
Q

What are the haemoglobin molecules?

A

A group of chemically similar molecules found in a variety of organisms.
They are protein molecules with a quaternary structure that has evolved to make it efficient at loading oxygen under one set of conditions but unloading it under a different set of conditions.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is the structure of haemoglobin?

A

Primary - sequence of amino acids in the four polypeptide chains.
Secondary - each polypeptide chain is coiled into a helix.
Tertiary - each chain is folded into a precise shape, an important factor in its ability to carry oxygen.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What is the quaternary structure of haemoglobin?

A

All 4 chains are linked together to form an almost spherical molecule.
Each polypeptide is associated with a haem group - which contains a ferrous ion.
Each Fe^2+ ion can combine with a single oxygen molecule, making a total of 4 oxygen molecules that can be carried by a single haemoglobin molecule in humans.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What is loading and unloading?

A

Or associating, the process by which haemoglobin binds to oxygen. In humans this takes place in the lungs.
Unloading or dissociating is the process by which haemoglobin releases its oxygen. This takes place in the tissues.
Haemoglobins with a high affinity for oxygen take up oxygen more easily, but release it less easily.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What is the role of haemoglobin?

A

To transport oxygen, to be efficient at this haemoglobin must:
Readily associate with oxygen at the surface where gas exchange takes place.
Readily dissociate with oxygen at those tissues requiring it.
It achieves this because its shape changes in the presence of certain substances, such as carbon dioxide.
In the presence of CO2, the new shape of haemoglobin molecule binds more loosely to oxygen, and releases it.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Why do different haemoglobins have different affinities for oxygen?

A

Each species produces a haemoglobin with a slightly different amino acid sequence.
Each species one therefore has a slightly different tertiary and quaternary structure and hence different oxygen binding properties.
Ranging from high affinity to low affinity for oxygen.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Why do large organisms have a transport system?

A

Surface area to volume ratio decreases to a point where the needs of the organism cannot be met by the body surface alone.
Specialist exchange surfaces are therefore required to absorb nutrients and respiratory gases, and remove excretory products.
A transport system is required to take materials from cells to exchange surfaces and vice versa.
As organisms have evolved into larger and more complex structures, tissues have become more specialised and dependent upon one another.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What does the transport system depend on?

A

The lower the surface area to volume ratio is, and the more active the organism, the greater is the need for a specialised transport system with a pump.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What are the features of transport systems?

A

A suitable medium in which to carry materials, e.g. blood, this is normally a liquid based on water because it readily dissolves substances and can be moved around easily, but can be a gas.
A form of mass transport in which the transport medium is moved around in bulk over large distances - more rapid than diffusion.
A closed system of tubular vessels that contains the transport medium and forms a branching network to distribute it to all parts of the organism.
A mechanism for moving the transport medium within vessels. This requires a pressure difference between one part and another.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

How are the features of the transport systems achieved?

A

Animals use muscular contraction either of the body muscles or of a specialised pumping organ, e.g. heart.
Plants rely on natural, passive processes such as the evaporation of water.
A mechanism to maintain the mass flow movement in one direction - e.g. valves.
A means of controlling the flow of the medium to suit the changing needs of different parts of the organism.
A mechanism for the mass flow of water or gases, e.g. intercostal muscles and diaphragm during breathing.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What is the circulatory system in mammals?

A

A closed, double circulatory system in which blood is confined to vessels and passes twice through the heart for each complete circuit of the body.
This is because, when blood passed through the lungs, its pressure is reduced. If it were to pass immediately to the body its low pressure would make circulation very slow.
Blood is therefore returned to the heart to boost its pressure before being circulated to the rest of the tissues.
Substances are delivered quickly, which is necessary as mammals have a high body temperature and hence high rate of metabolism.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What is the arrangement of main arteries and veins in mammals?

A

Oxygenated blood leaves the lungs, goes into the left atrium then ventricle and out the aorta.
It goes to the liver, the stomach and intestines, which joins to the liver, the kidneys through the renal artery, and the lower/hind limbs.
It then becomes deoxygenated, and leaves through veins, with the renal vein from the kidneys.
From the aorta, oxygenated blood goes to the fore limbs and head and neck, then becomes deoxygenated, and joins the vena cava.
It enters the right atrium through the vena cava and into the right ventricle, then to the lungs where it becomes oxygenated again.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What is the structure of the human heart?

A

It is two separate pumps, lying side by side.
The pump on the left deals with oxygenated blood from the lungs, while the right deals with deoxygenated blood from the body.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Why does the heart need two separate pumps?

A

Blood has to pass through tiny capillaries in the lungs in order to present a large surface area for the exchange of gases.
In doing so, there is a very large drop in pressure and so the blood flow to the rest of the body would be very slow.
Mammals therefore have a system in which the blood is returned to the heart to increase its pressure before it is distributed to the rest of the body.
It is essential to keep the oxygenated blood in the pump on the left side separate from the deoxygenated blood in the pump on the right.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What are the atrium and ventricle?

A

The atrium is thin-walled and elastic and stretches as it collects blood.
It receives blood from the veins.
The ventricle has a much thicker muscular wall as it has to contract strongly to pump blood some distance, either to the lungs or to the rest of the body.
They pump blood away from the heart and into the arteries.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

How do the ventricles work together?

A

The right ventricle pumps blood only to the lungs, and it has a thinner muscular wall than the left ventricle.
The left ventricle has a thick muscular wall, enabling it to contract to create enough pressure to pump blood to the rest of the body.
While they are separate, and after birth, there is no mixing of the blood in each of them, they pump in time with each other.
Both atria contract together and then both ventricles, pumping the same volume of blood.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

What are the valves between the ventricles and atrium?

A

They prevent backflow of blood into the atria when the ventricles contract.
The left atrioventricular (bicuspid) valve.
The right atrioventricular (tricuspid) valve.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

What are the pulmonary vessels?

A

Aorta - connected to the left ventricle and carries oxygenated blood to all parts of the body except the lungs.
The vena cava is connected to the right atrium and brings deoxygenated blood back from the tissues.
The pulmonary artery is connected to the right ventricle and carries deoxygenated blood to the lungs, where its oxygen is replenished and its carbon dioxide removed.
The pulmonary vein is connected to the left atrium and brings oxygenated blood back from the lungs.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

What are the coronary arteries?

A

They supply the heart muscle with blood, which branch off the aorta shortly after it leaves the heart.
Blockage of these arteries, leads to myocardial infarction, or heart attack, because an area of the heart muscle is deprived of blood and therefore oxygen.
The muscle cells in this region are unable to respire and so die.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

What is the cardiac cycle?

A

The heart undergoes a sequence of events that is repeated about 70 times each minute at rest.
There are two phases - contraction (systole) and relaxation (diastole).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

What is relaxation of the heart?

A

Blood returns to the atria through the pulmonary vein and the vena cava.
As the atria fill, the pressure in them rises.
When this pressure exceeds that in the ventricles, the atrioventricular valves open, allowing the blood to pass into the ventricles.
The passage of blood is aided by gravity.
The muscular walls of the atria and ventricles are relaxed, which causes them to recoil and reduces the pressure within the ventricles.
This causes the pressure to be lower than that in the aorta and the pulmonary artery, and so the semi-lunar vales in the aorta and pulmonary artery close.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

What is the contraction of the atria (atrial systole)?

A

The contraction of the atrial walls, along with the recoil of the relaxed ventricle walls, forces the remaining blood into the ventricles from the atria.
Throughout this stage the muscle of the ventricle walls remains relaxed.
The semi lunar valves stay closed and the atrioventricular valves open.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

What is the contraction of the ventricles (ventricular systole)?

A

After a short delay to allow the ventricles to fill with blood, their walls contract simultaneously.
This increases the blood pressure within them, forcing shut the atrioventricular valves and preventing backflow of blood into the atria.
The pressure in the ventricles rises further, once it exceeds that in the aorta and pulmonary artery, blood is forced from the ventricles into these vessels.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

What are the atrioventricular valves?

A

Between the left atrium and ventricle and the right atrium and ventricle.
These prevent backflow of blood when contraction of the ventricle means that ventricular pressure exceeds atrial pressure.
Closure of these valves ensures that, when the ventricles contract, blood within them moves to the aorta and pulmonary artery rather than back to the atria.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

What are the semi-lunar valves?

A

In the aorta and pulmonary artery.
These prevent backflow of blood into the ventricles when the pressure in these vessels exceeds that in the ventricles.
This arises when the elastic walls of the vessels recoil increasing the pressure within them and when the ventricle walls relax reducing the pressure within the ventricles.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

What are pocket valves?

A

In veins that occur throughout the venous system.
These ensure that when the veins are squeezed, e.g. when skeletal muscles contract, blood flows back towards the heart rather than away from it.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

What is the structure of valves?

A

They are made of a number of flaps of tough, flexible, fibrous tissue, which are cusp-shaped.
When pressure is greater on the convex side of these cusps, rather than the concave side, they move apart to let blood pass between.
Vice versa, this pushes them together to form a tight fit that prevents the passage of blood.

28
Q

When are valves needed?

A

Blood will always move from a region of high pressure to low pressure.
There are situations when pressure differences would result in blood flowing in the opposite direction from the desirable way.
Valves are then used to prevent unwanted backflow.

29
Q

What is cardiac output?

A

The volume of blood pumped by one ventricle of the heart in one minute.
It is measure in dm^3min^-1.
Cardiac output = heart rate x stroke volume.

30
Q

What is the ventricular pressure?

A

It’s low at first, but gradually increase as the ventricles fill with blood as the atria contract.
The left atrioventricular valves close and pressure rises dramatically as the thick muscular walls of the ventricle contract.
As pressure rises above that of the aorta, blood is forced into the aorta past the semilunar valves.
Pressure falls as the ventricles empty and the walls relax.

31
Q

What is the atrial pressure?

A

It is always relatively low as the thin walls of the atrium cannot create much force. It is highest when they are contracting, but drops when the left atrioventricular valve closes and its walls relax.
The atria then fill with blood, which leads to a gradual build-up of pressure until a slight drop when the atrioventricular valve opens and some blood moves into the ventricle.

32
Q

What is the aortic pressure?

A

It rises when ventricles contract as blood is forced into the aorta.
It then gradually falls, but never below 12kPa, because of the elasticity of its wall, which creates a recoil action - essential if blood is to be constantly delivered to the tissues.
The recoil produces a temporary rise in pressure at the start of the relaxation phase.

33
Q

What is the ventricular volume?

A

It rises as the atria contract and the ventricles fill with blood, and then suddenly drops as the blood is forced out into the aorta when the semilunar valve opens.
Volume increases again as the ventricles fill with blood.

34
Q

How does carbon monoxide in smoking increase heart disease?

A

It combines easily, but irreversibly, with the haemoglobin in red blood cells to form carboxyhaemoglobin.
This reduces the oxygen-carrying capacity of the blood.
So the heart has to work harder to supply the same quantity of oxygen.
This can increase blood pressure and increase the risk of coronary heart disease and strokes.
Additionally, the heart muscle may receive insufficient oxygen during exercise leading to angina or heart attack.

35
Q

How does nicotine increase the risk of heart disease?

A

It stimulates the production of adrenaline, which increases heart rate and blood pressure.
There is a greater risk of coronary heart disease or stroke.
Nicotine also makes the platelets ‘stickier’, increasing the risk of strokes or myocardial infection.

36
Q

What are the different types of blood vessel?

A

Arteries carry blood away from the heart and into the arterioles.
Arterioles are smaller arteries that control blood flow from arteries to capillaries.
Capillaries are tiny vessels that link arterioles to veins.
Veins carry blood from capillaries back to the heart.

37
Q

What is the layered structure of arteries, arterioles and veins?

A

Tough, fibrous outer layer that resists pressure changes from both within and outside.
Muscle layer that can contract and so control the flow of blood.
Elastic layer that helps to maintain blood pressure by stretching and springing back.
Thin inner lining (endothelium) that is smooth to reduce friction and thin to allow diffusion.
Lumen that is not a layer but the central cavity of the vessel through which blood flows.
The proportion of each layer changes by vessel.

38
Q

How does artery structure relate to its function?

A

The muscle layer is thick compared to veins - means smaller arteries can be constricted and dilated to control the volume of blood passing through them.
The overall thickness of the wall is great - resists the vessel bursting under pressure.
There are no valves because blood is under constant pressure due to the heart pumping blood into the arteries.

39
Q

How does arterioles structure relate to its function?

A

The muscle layer is thicker than arteries - the contraction of this allows constriction of the lumen, which restricts blood flow and so controls its movement into the capillaries that supply the tissues with blood.
The elastic layer is thicker than in arteries - as blood pressure is lower.

40
Q

How does the elastic layer in arteries relate to its function?

A

The elastic layer is thick - it is important that blood pressure in arteries is kept high to reach the extremities of the body.
The elastic wall is stretched in systole, then springs back in diastole, helping to maintain high pressure and smooth pressure surges created by the beating of the heart.

41
Q

How does vein structure relate to its function?

A

The muscle layer is thin as veins carry blood away from tissues and therefore their constriction and dilation cannot control the flow of blood.
The elastic layer is thin because the low pressure of blood within veins will not cause them to burst and pressure is too low to create a recoil action.
The overall wall thickness is small as the pressure is too low to create any risk of bursting. It also allows them to be flattened easily, aiding the flow of blood.

42
Q

How does vein structure relate to its function- valves?

A

There are valves at intervals to ensure that blood does not flow backwards, which it might otherwise do as the pressure is so low.
When body muscles contract, veins are compressed, pressurising blood within them.
The valves ensure this pressure directs the blood only towards the heart.

43
Q

How does the structure of capillaries relate to its function?

A

Their walls consist mostly of the lining layer, making them extremely thin, so the diffusion distance is short. This allows for rapid diffusion of materials between cells and blood.
They are numerous and highly branched, providing a large surface area for exchange.
There are spaces between the lining (endothelial) cells that allow white blood cells to escape to deal with infections within tissues.

44
Q

How does the structure of capillaries relate to its function - diffusion distance?

A

They have a narrow diameter and so permeate tissues, which means that no cell is far from a capillary and there is a short diffusion pathway.
Their lumen is so narrow that red blood cells are squeezed flat against the side of the capillary. This brings them even closer to the cells to which they supply oxygen, and reduces diffusion distance.

45
Q

What is tissue fluid?

A

A watery liquid that contains glucose, amino acids, fatty acids, and ions in solution.
It supplies all of these substances to the tissues.
It receives carbon dioxide and other waste materials from the tissues.
It is the immediate environment of cells and is where they live.

46
Q

What is tissue fluid formed from?

A

Tissue fluid is formed from blood plasma, and the composition of blood plasma is controlled by various homeostatic systems.
It provides a mostly constant environment for the cells it surrounds.

47
Q

What is hydrostatic pressure?

A

Pumping by the heart creates hydrostatic pressure.
This causes tissue fluid to move out of the blood plasma.

48
Q

What is the outward pressure of tissue fluid opposed by?

A

Hydrostatic pressure of the tissue fluid outside the capillaries, which resists outward movement of liquid.
The lower water potential of the blood, due to the plasma proteins, that causes water to move back into the blood within the capillaries.

49
Q

What is ultrafiltration?

A

The combined effect of these forces creates an overall pressure that pushes tissue fluid out of the capillaries at the arterial end.
The pressure is only enough to force small molecules out of the capillaries, leaving all cells and proteins in the blood because these are too large to cross the membranes.

50
Q

How is tissue fluid returned to the circulatory system?

A

The loss of the tissue fluid from the capillaries reduces the hydrostatic pressure inside them.
So, by the time the blood has reached the venous end of the capillary network its hydrostatic pressure is usually lower than that of the tissue fluid around it.
Therefore fluid is forced back into the capillaries by the higher hydrostatic pressure outside them.
Additionally, the plasma has lost water and still contains proteins, so therefore has a lower water potential than the tissue fluid.
Water leaves the tissue by osmosis.

51
Q

What is the other method of return of tissue fluid?

A

Not all can return to the capillaries, the remainder is carried back via the lymphatic system.
This is a system of vessels that begin in the tissues.
Initially they resemble capillaries, but gradually merge into larger vessels that form a network throughout the body.
These larger vessels drain their contents back into the bloodstream via two ducts that join veins close to the heart.

52
Q

How are the contents of the lymphatic system moved?

A

By hydrostatic pressure of the tissue fluid that has left the capillaries.
By contraction of body muscles that squeeze the lymph vessels - valves in the vessels ensure that the fluid inside them moves away from the tissues in the direction of the heart.

53
Q

What is the oxygen dissociation curve?

A

When haemoglobin is exposed to different partial pressures of oxygen, it does not bind the oxygen evenly.
The graph of the relationship between the saturation of haemoglobin with oxygen and the partial pressure of oxygen is this curve.

54
Q

What does the curve look like initally?

A

The shape of the haemoglobin molecule makes it difficult for the first oxygen molecule to bind to one of the sites on its four polypeptide subunits because they are closely united.
Therefore at low concentrations, little oxygen binds to haemoglobin.
The gradient of the curve is shallow initially.

55
Q

How does the first binding change the curve?

A

The binding of this first molecule changes the quarternary structure of the haemoglobin molecule, causing it to change shape.
This makes it easier for the other subunits to bind to an oxygen molecule.

56
Q

What is positive cooperactivity?

A

It takes a smaller increase in the partial pressure of oxygen to bind to the second oxygen than it did to bind the first one.
It is positive cooperactivity because binding of the first one makes binding of the second easier.
The curve steepens.

57
Q

What happens after the binding of the third molecule?

A

The situation changes, it is harder for haemoglobin to bind to the fourth molecule, due to probability.
With the majority of the binding sites occupied, it is less likely that a single oxygen molecule will find an empty site to bind to.
The gradient of the curve reduces and the curve flattens out.

58
Q

How is it better understood about the different oxygen dissociation curves?

A

The further to the left the curve, the greater its affinity of haemoglobin for oxygen.
The further to the right the curve, the lower its affinity of haemoglobin for oxygen.

59
Q

What is the Bohr shift?

A

Haemoglobin has a reduced affinity for oxygen in the presence of carbon dioxide.
The greater the concentration of carbon dioxide, the more readily the haemoglobin releases its oxygen.
This is because dissolved carbon dioxide is acidic and the low pH causes haemoglobin to change shape.

60
Q

Why does haemoglobin change at the gas exchange surface?

A

Here, e.g. the lungs, the concentration of carbon dioxide is low because it diffuses across the exchange surface and is excreted from the organism.
The affinity of haemoglobin for oxygen increases, which, with the high concentration of oxygen in the lungs, means that oxygen is readily loaded.
The reduced CO2 shifts the curve to the left.

61
Q

How does haemoglobin change in tissue?

A

In rapidly respiring tissues e.g. muscles, the concentration of carbon dioxide is high.
The affinity of haemoglobin for oxygen is reduced, which, with the low concentration of oxygen in the muscles, means oxygen is readily unloaded from the haemoglobin into the muscle cells.
The increased CO2 concentration shifts the curve to the right.

62
Q

How does the Bohr shift affect transport of oxygen?

A

At the gas exchange surface carbon dioxide is constantly being removed.
The pH is slightly raised due to low concentrations of carbon dioxide.
The higher pH changes the shape of haemoglobin into one that loads oxygen readily.
This also increases the affinity of haemoglobin for oxygen, so it is not released while being transported in the blood to the tissue.
In the tissue, carbon dioxide is produced by respiring cells.
Carbon dioxide is acidic, so the pH of the blood in the tissues is lowered.
This changes the shape of haemoglobin to have a lower affinity for oxygen.
Haemoglobin releases its oxygen into the respiring tissues.

63
Q

How does the activity of the tissue affect oxygen unloading?

A

The higher the rate of respiration - the more carbon dioxide the tissues produce - the lower the pH - the greater the haemoglobin shape change - the more readily oxygen is unloaded - the more oxygen is available for respiration.

64
Q

What is the oxygen saturation of haemoglobin in humans?

A

At atmospheric pressure is normally 97%.
When the haemoglobin reaches a tissue with low respiratory rate, normally only one molecule is released.
The blood returning to the lungs will be 75% oxygen saturated.
If a tissue is very active, then three oxygen molecules will be unloaded for each haemoglobin.

65
Q

What is the oxygen dissociation in a llama?

A

Llamas live at high altitudes where the atmospheric pressure is lower and so also the partial pressure of oxygen.
It is therefore difficult to load oxygen so they have a haemoglobin with a higher affinity for oxygen than in humans.

66
Q

What is the oxygen dissociation of a lugworm?

A

It lives on the seashore, and is not very active, spending all its life in a U shaped burrow.
It spends most of the time covered in sea water, oxygen diffuses into the blood from the water.
When the tide is out, the lugworm can no longer circulate water in its burrow, so the water in the burrow has less oxygen.
It has to extract as much oxygen as possible, so the haemoglobin is fully loaded with oxygen even when there is little in its environment.