Maintenance Publications Flashcards

1
Q

Airworthiness Directives are issued primarily to…

A

Correct an unsafe condition.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q
A

Only 1 is true.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What does the acronym TSO mean regarding a type certificated aircraft part, material, component and/or process?

A

Technical Standard Order.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Primary responsibility for compliance with Airworthiness Directives lies with the…

A

Aircraft owner or operator.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

An aircraft Type Certificate Data Sheet contains…

A

Location of the datum.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Suitability for use of a specific propeller with a particular engine-airplane combination can be determined by reference to what informational source?

A

Aircraft Specifications or Aircraft Type Certificate Data Sheet.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

When an aircraft is sold domestically, the Airworthiness Certificate…

A

Is transferred with the aircraft at the time of sale.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

The issuance of an Airworthiness Certificate is governed by…

A

14 CFR Part 21.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Specifications pertaining to an aircraft model manufactured under a type certificate of which less than 50 are shown on the FAA Aircraft Registry, can be found in the…

A

Aircraft Listing.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Where are technical descriptions of certificated propellers found?

A

Propeller Type Certificate Data Sheets.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What information is generally contained in Aircraft Specifications or Type Certificate Data Sheets?

A

Control surface movements.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Placards required on an aircraft are specified in…

A

Aircraft Specifications or Type Certificate Data Sheets.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Technical information about older aircraft models, of which no more than 50 remain in service, can be found in the…

A

Aircraft Listing.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Which of the following are sometimes used as authorization to deviate from an aircrafts original type design?

A

FAA Form 337, Supplemental Type Certificate, and Airworthiness Directive.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q
A

Only 1 is true.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Which regulation provides information regarding instrument range markings for an airplane certificated in the normal category?

A

14 CFR Part 23.

17
Q

Which regulation provides the airworthiness standards for an airplane certificated in the normal category?

A

14 CFR Part 23.

18
Q

What regulations are covered by 14 CFR Part 1?

A

Definitions and abbreviations.

19
Q
A

Only 2 is true.

20
Q

An aircraft mechanic is privileged to perform major alterations on U.S. certificated aircraft; however, the work must be done in accordance with FAA-approved technical data before the aircraft can be returned to service. Which is NOT approved data?

A

AC 43.13-2A

21
Q

What is the maintenance recording responsibility of the person who complies with an Airworthiness Directive?

A

Make an entry in the maintenance record of that equipment.

22
Q
A

Only 2 is true.

23
Q

A Technical Standard Order (TSO) is issued by whom?

A

The Administrator.

24
Q
A

Both 1 and 2 are true.

25
Q

Aviation Maintenance Alerts (formerly General Aviation Airworthiness Alerts)…

A

Provide information about aircraft problems and suggested corrective actions.

26
Q

(Refer to Figure 62.) The -100 in the title block (Area 1) is applicable to which doubler part number(s)?

A

-101

27
Q

(Refer to Figure 63.) An aircraft has a total time in service 468 hours. The Airworthiness Directive given was initially complied with at 454 hours in service. How many additional hours in service may be accumulated before the Airworthiness Directive must again be complied with?

A

186.

28
Q

The following words are an example of what kind of statement in an AD? “Required within the next 25 hours time-in-service after the effective date of this AD, unless already accomplished.”

A

Compliance.

29
Q

The action required by an AD may take what form?

A

1,2,3, and/or 4.

30
Q

Type Certificate Data Sheets are issued for which of the following products?

A

Aircraft, engines, and propellers.

31
Q
A

139 knots.

32
Q

When is a mechanic responsible for checking AD compliance?

A

When performing an inspection required under part 91, 125, or 135.

33
Q

How long are AD compliance records required to be kept?

A

They shall be retained, and then transferred with the aircraft when it is sold.

34
Q

What does the Type Certificate Data Sheet designation code “2 PCSM’ mean? (K01)

A

Two place (number of seats), closed, sea, monoplane.

35
Q

Which of the following includes all the regulatory definitions of “maintenance”?

A

Overhaul, repair, parts replacement, inspection, and preservation.

36
Q

What is the maximum penalty for cheating or other unauthorized conduct when taking an FAA mechanic test?

A

Ineligibility to receive any certificate or rating for one year, and suspension or revocation of any certificate held.

37
Q
A

100 hours.

38
Q
A

150 hours.