Aircraft Finishes Oral Flashcards

1
Q

Why is butyrate dope safer to use than nitrate dope?

A

More fire-resistant than nitrate dope

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What are the two types of dope used for fabric finishes?

A

Cellulose nitrate and cellulose acetate butyrate.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is the appearance of a blushing paint finish?

A

Chalky or cloudy

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What finishing defect is the result of a paint room temperature that is too warm?

A

Pinholes or blisters

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What causes dope to blush?

A

High humidity, moisture in the spray system, or application over a damp surface

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What factors cause spray paint sags and runs?

A

Inadequate surface preparation or paint sprayed on too thickly

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What components or parts of the airframe must be protected from damage when using a paint stripper?

A

Windshields and windows, plastics, composites, synthetic rubber, and fabrics

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What is the function of zinc-chromate or wash primers?

A

Primers serve to inhibit corrosion and provide a good bond between the metal and the topcoats

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Name three common types of paint used on aircraft

A

Zinc-chromate and wash primers, synthetic enamels, and acrylic lacquer.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What is the proper thinner to use with zinc-chromate primer?

A

Toluene

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What health and safety precautions must be observed when using the toxic solvents and thinners that are part of modern finishing systems?

A

Respirators and/or masks must be worn when spraying finishes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

If spray painting dust causes a surface to appear dry and rough, what are the most likely causes?

A

Too much air pressure or the spray gun is too far from the surface being painted

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What regulation governs the application of the registration numbers to aircraft registered in the United States?

A

14 CFR Part 45: Identification and Registration Marking

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What causes “orange peel”?

A

Spray pressure too high, use of a thinner that dries too fast, cold temperatures, or a damp draft over the surface

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Other than appearance, what is another reason for touching up painted surfaces?

A

Reduction or elimination of general corrosion problems

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What reference should be used to determine if a control surface must be checked and/or rebalanced after painting?

A

The manufacturer’s service manual

15
Q

What would be the effect if dope was used over paint or enamel?

A

The dope tends to dissolve these materials

16
Q

What are the three most commonly used methods of applying paint?

A

Dipping, brushing, and spraying

17
Q

What is the effect on paint finishes if too much drier is added to the paint?

A

The paint film will be brittle and tend to crack and peel

18
Q

What paint system(s) may be used with epoxy top coats?

A

Any paint system in good condition