Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

radiotherapy year 2 > Equipment > Flashcards

Equipment Flashcards

1
Q

What does modulator consist of?

A

Pulse forming network
Thyratron
Circuit converting power supply to DC

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is the pulse repetition frequency and the length of pulses?

A

200-300Hz, pulse of ~3micro s
(3-5ms pulse intervals)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What first happens in modulator?

A

3 phase power supply converted to DC, supplies DC to PFN.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What is PFN origin of and how does it work?

A

Origin of high voltage pulse
Circuit of capacitors in parallel, when they discharge they produce a high voltage pulse as close to a square pulse as possible.
Capacitor provides power to charge up PFN until it reaches the voltage it wants and circuit closes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What does thyratron act as?

A

High voltage switch to rapidly discharge PFN and complete circuit to send pulse onwards

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

In magnetron what does spreading out of electrons correspond to?

A

Magnitude of induced EF
Size of EF determines amplitude of RF wave

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

In magnetron, what determines how tightly grouped electrons are?

A

Voltage between anode and cathode
(which is voltage of pulse from modulator)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

How do you change frequency in magnetron and klystron?

A

Magnetron: determined by resonance of cavities and plunger can fine tune this
Klystron: input microwaves

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Why is transmission waveguide filled with SF6 gas?

A

Reduce arching
Damage becomes antennae. Pit and peak.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What are the types of accelerating waveguide

A

Standing or travelling

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What are MLC numbers and dimensions?

A

28-80 pairs
typically 0.5-1mm at isocentre
Shaped and angled to minimise inter-leaf leakage

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

How is induced radioactivity created?

A

Neutrons ejected from nucleii. Hazardous due to different shielding requirements. Cause induced radioactivity - mostly neutron activation of metals in head of linac

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What is nuclear binding energy?

A

~9MeV

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Result of neutron flux

A

Neutron flux for beams over 10MV, must be checked when using 15MV beams
More shielding in maze as neutrons scatter more than photons (baffles or neutron absorbing material in door)
Contribute to patient dose - RBE of 20

Wall shielding for photons is acceptable

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Limits of leakage radiation

A

Max 5% of air kerma rate of useful beam at 1m from target
In patient, max 0.2% useful beam, mean 0.1%

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What are we trying to achieve with ionisation chamber?

A

Measure something that allows calculation of dose - ionisation good thing to measure.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

What do we need to decide when creating ionisation chamber?

A

Material for casing
Size of collecting volume
Polarising voltage
Polarity of voltage
Material for internal electrode
How to minimise extra-cameral current

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

What is job of casing of ionisation chamber?

A

Define the cavity
Conduct electricity
Same attenuation/absorption characteristics as medium that it’s in (air kV, water/medium MV)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

What properties does casing of ionisation chamber need?

A

Conducting
Homogeneous
Water (medium) equivalent
Robust??
Waterproof?

20
Q

How do you decide on size of collecting volume?

A

What is requirement of ionisation chamber? Reference dosimetry, SRS, PDD, area scatter chamber.
Small in relation to dose gradient
Does it behave like Bragg_gray?

21
Q

Where does extra-cameral current come from?

A

Interactions in stem, cable, electronics
Leakage between currents (intrinsic leakage)
Charge accumulation in insulators (effects of irradiating plastic insulators is really complex)
Stressed cables

22
Q

Why do you get intrinsic leakage in ionisation chamber?

A

Two adjacent conductors at different potentials
Insulator not perfect
Dampness or surface contamination can enable current

23
Q

What is the job of the guard ring?

A

Ensure current only comes from defined volume
Thimble: avoid conduction through insulator
Plane-parallel: define volume for collection, exclude electrons scattered in from side walls

24
Q

What is the job of the polarising voltage in ionisation chamber?

A

Pull ions apart
collect ions to make a current
Need specific voltage - minimise recombination and avoid charge multiplication

25
Q

Why can we end up with proportionally more ions at higher voltage?

A

Electrons accelerate in electric field
E field strength increases close to central electrode
If V high enough, electrons can collide and generate more electrons
As voltage increases, electron multiplication increases

26
Q

Electric field strength in ionisation chamber

A

Depends on voltage accross gap
Increases close to central electrode

27
Q

What are requirements for central electrode of ionisation chamber?

A

Robust
Conducting
Same interactions as body

28
Q

What are interactions in mediums that could be used for internal electrode?

A

Steel: too much PE
Aluminium: mostly compton
Conducting plastic: can be made to be mostly Compton
Graphite: compton

29
Q

What are considerations of polarity of voltage in ionisation chamber?

A

Polarity can give different readings, although mostly negligible in high energy beams.
For relative measurements, use same polarity or calculate average or calculate kpol
For reference and x-calibrated, use same polarity as in chain

30
Q

What is the difference between a virtual and dynamic wedge?

A

Virtual: constant velocity & variable dose rate
Dynamic: variable dose rate and jaw speed

31
Q

What is role of cooling system?

A

Keep linac at optimum running temperature - this is 40 degrees. A lot of excess heat is generated which must be handled.

32
Q

What is role of vacuum pump?

A

Keep waveguide, standing or travelling, under constant vacuum. Electrons need a clear path.

33
Q

What is role of steering coils?

A

Change the path of electrons, angle, position and size of pulse.

34
Q

How does magnetron operate?

A

Thermionic emission from heated cathode
Electrons accelerated across from cathode to anode
Curved path due to magnetic field - form spokes
Electrons initiate oscillating E field as they cross cavity openings
E field feed back bunches electrons
These bunches amplify existing E field
Oscillation of E field produces microwaves are channelled to accelerating waveguide

35
Q

How does klystron operate?

A

Low power microwaves and electrons (from thermionic emission) injected into first cavity
Microwaves accelerate/decelerate electrons depending on phase at injection and bunches them
Get tightly bunched pulse of electrons travelling at same frequency as input microwaves
As electrons cross catcher cavity they induce electric field with same frequency as input MW but higher amplitude

36
Q

What is temperature of heater in electron gun?

A

1000oC

37
Q

What is potential of cathode, anode and grid in triode gun?

A

20kV cathode
Anode at ground
Grid has high speed switching of potential, held at higher -ve potential but pulsed to positive

38
Q

How does electron bunching work?

A

When electrons meet wave, can be in a favourable phase or not. Roughly half of electrons are scattered to walls and eliminated.
Others gather in bunches

39
Q

How does slalom bending magnet work?

A

Beam first bent 45 degrees, then another 45 degrees in opposite direction (to converge) then 112.5 degrees while converging so they exit bending magnet at same spot

40
Q

What are the properties of the photon target, type of target?

A

Transmission target
High Z (W-74 or steel)
High density
High melting point

Forward peaked beam, brem. radiation, high efficiency wrt reflection target. No characteristic radiation

41
Q

What are monitor chambers?

A

Transmission ionisation chambers which fully intercept treatment beam. More than one for redundancy.

42
Q

What do two chambers monitor?

A

Chamber 1: dose/dose rate
Chamber 2: dose/dose rate (redundancy), flatness/symmetry

43
Q

What are the two impacts of nuclear reactions form photons/electrons?

A

Neutron flux in beams greater than 10MV
Induced radioactivity

44
Q

What order of magnitude difference should there be between current and leakage?

A

Should be two orders of magnitude between current and leakage

45
Q

What is the difference between travelling and standing waveguides?

A

Travelling are longer and simpler
MW injected at end of travelling

Standing has side coupled cavities for nodes

46
Q

How do we decide on polarising voltage?

A

Depends on size of cavity: field strength depends on voltage across gap V/mm, so size of gap determines strength

radiotherapy year 2 (16 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions