Fuel System Flashcards

1
Q

Why do some aircraft have jettison system?

A

To allow the crew to reduce the weight of the aircraft down to or below maximum allowable landing weight

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Is there any reason why a fuel jettison system might be required on a small aircraft?

A

Yes, if the maximum takeoff weight exceeds the max allowable landing weight, a jettison system would be required

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

what are some other names for a single point fueling system?

A

an underwing or pressure fueling system

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Why do multi-engine airplanes have fuel crossfeed system?

A

To allow any engine to draw fuel from any tank

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

The fuel selector valve for a multi-engine aircraft must have at least three position, what are they?

A

ON, OFF, and crossfeed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Why do some fuel tanks have internal buffles?

A

TO resit fuel surging or sloshing caused by changes in the attitude of the aircraft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What are the two types of fuel cells?

A

Integral or wet wing fuel cells, and bladder-type fuel cells.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What does the term “wet wing” mean?

A

It means that sealed portions of the aircraft wing structure from the fuel tank(s)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

How is weight of the fuel supported when bladder type fuel cells are used?

A

The bladder is supported by the aircraft structure which contains it

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Why do turbine-engine aircraft have fuel temperature indicating systems?

A

To allow the crew to determine if the fuel is cold enough to produce a danger of the formation of ice crystals

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Name four types of fuel quantity gauging systems currently in use?

A

Sight gauge, mechanical, electric, and electronic gauges.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

why are electronic (capacitance type) fuel quantity indicating systems more accurate than other types?

A

They measure the mass of the fuel instead of volume

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What are drip gauges and sight gauges?

A

Underwing, bayonet type fuel gauge

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What is the purpose of an in transit light associated with an electrically operated fuel tank shutoff valve?

A

To provide an indication that the valve is in motion between one position and another

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

For what reason is a fuel jettison system usually divided into two separate, independent systems, one for each wing?

A

to help maintain lateral stability by jettisoning fuel from a heavy wing if necessary

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

what procedure should be followed regarding gaskets and seals when replacing fuel system components?

A

All old gaskets and seals should be replaced with new ones

17
Q

Is it possible for a fuel system to develop a leak that has no visible evidence such as a stain or spot , and if so, How?

A

an internal component such as valve could develop a leak

18
Q

How is a fuel tank checked for leaks following a patch or welded repair?

A

The tank is slightly pressurized with air and the repaired area is leak checked with a soap and water solution

19
Q

Name some advantages of a single-point fueling systems

A

it reduces fueling time, reduces chances for contamination and fire, and eliminates damage to the aircraft skin

20
Q

why should you wait for a period of time after fueling an aircraft before checking the fuel sumps

A

To allow time for water and contaminants to settle to the drain point