Traction Siemens - Session 8,9,10,11,12,13

Question 1

When doing cab unattended what position do you move MC to?

Answer 1

B6

Question 2

What speed is a low speed running brake test?

Answer 2

5km

Question 3

When diving, what should brake cylinder gauge be displaying?

Answer 3

Emg

Question 4

Is a trip test done when a train divides at a platform?

Answer 4

No

Question 5

If train fails to uncouple what do you do?

Answer 5

Call TC, no secondary uncouple procedure

Question 6

If couplers fail to retract after Uncoupling, do you press uncouple button again?

Answer 6

Yes

Question 7

If trains fail to attach, what do you do?

Answer 7

Call TC

Question 8

Are Siemens cab doors included in door loop system?

Answer 8

Yes

Question 9

If FDCL appears mid running, do you stop in the section or slow down and stop at next station?

Answer 9

Slow down stop at next station

Question 10

If blue door close button is extinguished, what are 2 reasons?

Answer 10

DER activated
Trailing cab door open

Question 11

If door system fault light illuminated, is the system faulty or is there a faulty door on the train?

Answer 11

Faulty door

Question 12

When responding to FDCL and light continues to flash, what CB do you trip and reset?

Answer 12

Door control train lines

Question 13

When locating a defective door, how many seconds until door tones no longer sound

Answer 13

30 seconds

Question 14

Functionality tests

Answer 14

Brake
Traction cut out
Vigilance device
Vicers
Trip

Question 15

On a pre movement prep what tests are not required?

Answer 15

Vicers
Trip if not entering mainline

Question 16

In traction cut out test how quickly do you need to press ESB

Answer 16

1 1/2 seconds

Question 17

I’m vigilance test, how many seconds do you wait for emergency brake to apply after releasing hand or foot device

Answer 17

3 seconds

Question 18

Pre departure check procedure (3)

Answer 18

Activate cab
Ensure emg brake releases to holding pressure
Ensure safety loop light extinguishes

Question 19

How many seconds after pressing stabling button will pantos go down?

Answer 19

30 seconds

Question 20

3 things you need to look for when locating a door failure

Answer 20

Unplugged saloon doors
For open button flashing red
Door tone sounding in saloon

Question 21

When managing a door failure situation, if there is no obstruction do you still treat the door as defective?

Answer 21

Yes, close it and isolate with tri key