unit 11 Flashcards

1
Q

What are some of the assurances about construction quality provided to home buyers by federal laws and regulations?

A

HUD’s Minimum Property Standards provide minimum standards for HUD-regulated single-family and multi-family construction projects. The Interstate Land Sale Full Disclosure Act guards consumers against fraud by requiring developers to disclose relevant information about subdivisions before purchase. The National Electric Code provides standards for wiring and electrical equipment. The Americans with Disabilities Act ensures that accessibility standards will be observed in certain types of residential construction.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What are some of the typical requirements for well and septic systems?

A

Requirements for wells typically concern placement—for access, freedom from flooding, away from sources of contamination. Requirements for septic systems typically concern proper design, construction, and maintenance; suitable soil; adequate land area.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What does a footing do?

A

Supports the entire weight of a structure.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What is a sill plate and what does it do?

A

A sill plate is a wooden support member that is laid on top of and bolted to the foundation wall. This sill plate serves as the base for the wall framing.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What are the three types of frame construction?

A

Platform
Balloon
Post and Beam

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What is the most common type of heating system in North America and how does it work?

A

A forced-air heating system is the most common. It draws room air through ductwork and a filter into a furnace, where the air is heated. The warmed air is then blown back to rooms through ductwork.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What are the two types of heat pumps available?

A

Air source and ground source

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Name three types of pipes used in plumbing systems.

A

Cast iron

Copper

PVC

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What is the difference between voltage and amperage?

A

Voltage is a measure of how much pressure the electrons in a circuit are under.

Amperage is a measure of the amount of electrons moving through the circuit.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

If a property is built with any money from a federal program, the property must….

A

be approved in advance and be inspected by the proper agency as the construction progresses

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

HUD’s minimum property standards provide…

A

minimum standards for HUD-regulated single-family and multi-family construction projects

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

The interstate land full disclosure act

A

guards consumers against fraud by requiring developers to disclose relevant information about subdivisions before purchase

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

the national electric code..

A

provides standards for wiring and electrical equipment

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

the Americans with disabilities act

A

ensures that accessibility standards will be observed in certain types of residential construction

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Cities, counties and local governments have the power to impose their own land use regulations and building codes. most legislation is overseen by the..

A

EPA - national environmental policy act of 1969

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

requirements for wells concern …

A

placement - for access, freedom from flooding, away from sources of contamination

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

requirements for septic systems concern..

A

proper design, construction, and maintenance, suitable soil, adequate land area

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

The __ holds the entire weight of the building

A

footing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

If the area between the ______ has been excavated deeply enough to provide head room, then a _____ has been created. If the foundation area is only partially excavated, then what results is a ____

A

foundation walls; basement; crawl space

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

The foundation wall of a basement and floors that come in contact with soil must be treated for ground and surface water seepage by the placement of a

A

vapor barrier

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

when the ground at a building site is level, the developer can use a _____. the ____ is a flat concrete pad poured directly on the ground

A

slab-on-grade foundation;slab

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

___ refers to the framework of the structure. the pieces of wood are used are ___. Studs used to frame he roofing system are ___

A

wood framing;studs;rafters

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

in ___ construction, first floor joists are completely covered with sub-flooring to for a platform upon which exterior walls and interior partitions are erected

A

platform-frame construction

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

in ___ construction, exterior wall studs continue through the first and second stories.

A

balloon-frame construction

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

in____ construction, wider beams are spaced up to eight feet apart

A

post and beam construction

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

______ consists of a system of sills, girders, joists or floor trusses and sub-flooring that provides support for floor loads and gives lateral support to exterior walls.

A

Floor framing

27
Q

a ___ is a wooden support member that is laid on top of and bolted to the foundation wall

A

sill plate

28
Q

when two or more joints are required to cover the span, support is provided for the joist ends by ___ or support ___.

A

girders;beams

29
Q

Sometimes the main floor beam of the structure is supported by ____

A

lally columns

30
Q

___ construction must be strong enough to withstand anticipated snow and window loads

A

roof

31
Q

carpenters build ____ to Fram the__ or slop of the roof.

A

rafters;pitch

32
Q

the ____ is the highest part of the Fram and forms the top line of the roof.

A

roof ridge beam

33
Q

the roof ___ is made-up of wood structural panels or 1-in board lumber which provides solid base for roof coverings.

A

sheathing

34
Q

___ refers to both the exterior and interior walls.

A

wall framing

35
Q

walls that support the ceiling and the roof are called ____

A

bearing walls

36
Q

___ are required at window and door openings to carry vertical loads across the opening

A

headers

37
Q

roof Finishing - the overhangs are called ___. the contractor installs a thin impermeable material called ___ to prevent water penetration and/or provide water drainage between the roof and the walls.

A

eaves;flashing

38
Q

Roof finishing - the term __ is used to describe the horizontal “__ board” which caps the end of rafters outside the building. the finished surface below the __ and rafters is called the ___.

A

fascia; fascia;fascia;soffit

39
Q

walll finishing - the high resistance of wood Frame construction to hurricane, earthquake and other natural forces is provided when wood ___ is nailed to the outside edges of exterior wall studs, plates and headers.

A

sheathing

40
Q

for interior wall finishing, contractors use ___ ___ __ or ___

A

plasterboard, wallboard, drywall or sheetrock

41
Q

the ___ is the degree or resistance to the heat transfer. Categories of insulation include __ __ __ __ and __.

A

r-value;loose fill, batts and blankets, rigid board, spray and reflective.

42
Q

____ is the intentional movement of air from outside a building to the inside.

A

ventilation

43
Q

____ is that air used for providing acceptable indoor air quality

A

ventilation air

44
Q

residential ___ typically fall into one of these catergories:

A

heating systems; hot water, steam, forced air or electric

45
Q

____ are combined with forced-air heating units to deliver heat through the ductwork system in cold seasons and cool, dehumidified air for air conditioning through the same ducts during warm seasons.

A

air conditioning systems

46
Q

the most comment type of ___ is the air-source. Higher efficiencies are achieved with ____

A

heat pump; geothermal heat pumps

47
Q

a ____ is the amount of heat energy needed to raise the temperature of one pound of water by one degree fahrenheit

A

British thermal unit (btu)

48
Q

Plumping: hot water heaters

A

gas, electric, tankless or solar

49
Q

types of pipe

A

cast iron, galvanized, copper, pvc, brass, PEX

50
Q

__ that are too small prevent the pressure from moving the water to the fixtures

A

pipes

51
Q

the ___ allows gases and odors to circulate up through the system and escape into the outside air

A

vent system

52
Q

__ is a measure of how much pressure the electrons in a circuit are under

A

voltage

53
Q

___ (in watts) is a measure of the amount of electrons moving through the circuit

A

amperage

54
Q

a __ melts and breaks the circuit when the current exceeds a certain value. A __ stops the flow of electric current in a. suddenly overloaded circuit

A

fuse; circuit breaker

55
Q

wiring materials

A

aluminum or copper, bx cable, Romex cable, conduit, Greenfield conductors

56
Q

the ____ covers the installation of electrical conductors, equipment and optical fiber cables

A

national electric code

57
Q

A _________ is a protective device containing a wire that melts and breaks the circuit when the current exceeds a certain value.

A

fuse

58
Q

The Minimum Property Standards is

A

a set of HUD regulations for buildings constructed under HUD housing programs.

59
Q

Which of the following is NOT part of a septic system?

A

Floating slab

60
Q

Real estate licensees should know enough about building ordinances to be able to

A

alert clients of potential problems in a home.

61
Q

Construction standards for the provision of building accessibility for elderly and disabled persons are mandated by the federal

A

Americans with Disabilities Act.

62
Q

Which is the most common type of framing for residential construction?

A

Platform

63
Q

How is amperage calculated?

A

Watts or kilowatts

64
Q

Which of these types of wire would probably not be found in a residence?

A

Steel wire