Book 3: 6-16 - Welding Terms & Inspection

Question 1

When the entire procedure is performed by hand it is referred to as:

Select one:

A. Machine welding
B. Arc welding
C. Manual welding
D. Gas welding
E. Stick welding

Answer 1

A. Manual welding

Question 2

The metal to be welded is called the:

Select one:

A. Bass metal
B. Backing ring
C. Bare electrode
D. Butt joint
E. Arc welder

Answer 2

A. Base metal

Question 3

Welding requires good protective clothing including all of the following except:

Select one:

A. Flameproof apron
B. Heavy, dark polyester clothing with no pockets or cuffs
C. Flameproof gloves
D. Hard hat or skullcap
E. High-topped safety shoes

Answer 3

B. Heavy, dark polyester clothing with no pockets or cuffs

Question 4

A weld deposit resulting from a pass with a welding rod is called a/an:

Select one:

A. Pass
B. Brazing
C. Coalescence
D. Double weld
E. Weld bead

Answer 4

E. Weld bead

Question 5

To qualify a welding procedure, the manufacturer must supply a detailed written description of procedure, listing all of the following information except:

Select one:

A. The identity of the welder
B. Electrode specifications
C. Method of joint preparation
D. Type and thickness of material welded
E. Type of welding process

Answer 5

A. The identity of the welder

Question 6

An electric arc cutting process where a metal is cut with the heat of an arc between a carbon electrode and the base metal is called:

Select one:

A. Brazing
B. Carbon Arc Cutting
C. Coalescence
D. Arc welding
E. Fusion

Answer 6

B. Carbon Arc cutting

Question 7

The approval of a welding procedure by the government authority to be used for a specific application is called a/an:

Select one:

A. Manual welding
B. Machine welding
C. Procedure qualification
D. Postheating
E. Preheating

Answer 7

C. Procedure qualification

Question 8

The device that is placed inside piping or vessels to facilitate obtaining a sound, nonporous weld at the root is called a/an:

Select one:

A. Bare electrode
B. Butt joint
C. Backing ring
D. Arc welder
E. Base metal

Answer 8

C. Backing ring

Question 9

A weld made from both sides of the join is called a/an:

Select one:

A. Pass
B. Single weld
C. Coalescence
D. Fusion
E. Double weld

Answer 9

E. Double weld

Question 10

Pressure welders can be qualified for Certificates of Competency at _____ levels.

Select one:

A. Five
B. Two
C. Four
D. One
E. Three

Answer 10

E. Three