Test 5 Flashcards
In the illustration below, what describes the likely sequence of events to produce the effect shown?
Stain, wash coat, paste fill, top coat
Which wood species listed here would benefit the most from paste filling before top coating if a smooth surface was desired?
Cherry
Maple
Oak
Alder
Oak
What would be the purpose for tinting paste filler?
To provide contrast to the stained colour of open grained wood
True or False: Metallic powder may be used as a colorant for paste filler.
T
What happens when you apply paste filler to a stained panel without sealing it first?
The stain coat may be worn off in spots
Why is paste filler brushed on and then wiped off first perpendicular to the grain and then with the grain?
To work the filler into the pores
You have mixed a colourant with a clear finishing product for spraying. You have used this material for highlighting and accenting the surface of some already stained and lacquered furniture. What is the necessary final step?
Apply a Clear topcoat
Which material listed here would be best to use for colorant in spray shading with lacquer?
Penetrating oil stain
Powdered aniline dyes
Water stain
Pigment oil stain
Powdered aniline dyes
What technique is used to adjust the gloss of a mid sheen lacquer to a higher sheen?
Polishing
For polishing a finish, which abrasive material is the finest
Rottenstone
What else do you need to use along with rottenstone when polishing a finish?
Felt pad an Oil
What special finish is an intentional large scale duplication of the spray finishing defect known as fish-eye?
Lunar
A piece of furniture has been modified by distressing. What characteristic tells you it has been done properly?
It looks old and worn
In wood finishing, if you are using impact, abrasion and boring techniques, what are you doing
Distressing
What results when stain is mixed with varnish?
You have made a glaze
How is ammonia used to affect the colour of some woods?
Sealed with the item in a tent and allowed to evaporate
