Book 3: Unit 1 - Review: Chapter 1 - 2

Question 1

It much easier to have changes made to a _____ than it is to have changes made to an Act.
Select one:

a. Proclamation

b. Act

c. Edict

d. Bill

e. Regulation

Answer 1

e. Regulation

Question 2

What determines the classification of the certificate of competency required for the role of chief power engineer?
Select one:

a. ASME regulations.

b. Kilowatt rating of the power plant.

c. Type of feedstock used.

d. Number of employees.

e. Product classification.

Answer 2

b. Kilowatt rating of the power plant.

Question 3

What code contains guidelines for the care and operation of heating boilers?
Select one:

a. NFPA.

b. ASME Section VI.

c. CSA B51.

d. ASME Section IV.

e. CSA B52.

Answer 3

b. ASME Section VI.

Question 4

The main or primary document which must be passed through the jurisdictional parliament is a/an:
Select one:

a. Regulation

b. Act

c. Edict

d. Bill

e. Proclamation

Answer 4

b. Act

Question 5

An international code which has been adopted and is enforced by all jurisdictions is the:
Select one:

a. Regulation

b. ASME Code

c. CSA B52

d. Act

e. CSA B51

Answer 5

b. ASME Code

Question 6

Which of these is the “Boiler, Pressure Vessel and Pressure Piping Code” ?

Select one:

a. ASME Section I.

b. CSA B52.

c. ASME Section VII

d. CSA B51

e. NFPA.

Answer 6

d. CSA B51

Question 7

One of the national legislative items which each jurisdiction in Canada has adopted as part of their applicable Act and/or Regulations is the:
Select one:

a. ASME Codes

b. CSA B51

c. ANSI Codes

d. NFPA Codes

e. NAFTA Codes

Answer 7

b. CSA B51

Question 8

What code contains Rules For Construction of low-pressure hot water supply boilers?
Select one:

a. ASME Section VIII.

b. NFPA.

c. ASME Section IV.

d. CSA B51.

e. CSA B52.

Answer 8

c. ASME Section IV.

Question 9

The Pressure Vessels” section of the B-51 code identifies pressure vessels and their installation

Select one:

a. Fuel tanks.

b. Blowdown tanks.

c. Dearators.

d. Boiler drums.

e. Hydropneumatic tanks

Answer 9

c. Dearators.

Question 10

Clear definitions for terms and equipment relating to refrigeration and air conditioning equipment are defined in the _____.
Select one:

a. NFPA 1001

b. ASME Section VII

c. ASME Section I

d. CSA-B52

e. CSA-B51

Answer 10

d. CSA-B52

Question 11

What ASME code contains Recommended Guidelines For The Care of Power Boilers?
Select one:

a. CSA B51.

b. ASME Section VII.

c. NFPA 1001.

d. CSA B52.

e. ASME Section I.

Answer 11

b. ASME Section VII.

Question 12

In general, all Acts will have the all of the following in common except:
Select one:

a. A list of fees associated with the registration of pressure vessels

b. The requirement for, and the methods of, inspecting, testing and certifying qualified repair and supervisory personnel will be clearly set out by the Act

c. The responsibility and delegated authority of the Authorized Inspector, as well as the responsibilities of the owner or Chief Engineer of a plant where an inspection is being done, will all be clearly stated

d. A listing of the Codes and standards that have been adopted for use

e. There will be a list of penalties, which could be levied for complying with the Act or Regulations

Answer 12

e. There will be a list of penalties, which could be levied for complying with the Act or Regulations

Question 13

What are the two main purposes of the CSA B-52 code?
1. Terms and equipment relating to refrigeration and air conditioning equipment are defined.
2. The various classifications of buildings and occupancies are listed and described with examples of each classification given.
3. To provide for the safe design, construction, installation, operation and repair of refrigerating and air conditioning equipment and systems, and related equipment.
4. To promote uniform requirements among the provinces and territories.

Select one:

a. 1, 4

b. 3, 4

c. 2, 4

d. 1, 3

e. 1, 2

Answer 13

b. 3, 4

Question 14

This group decides the content of the various courses and the criteria required to ensure a Power Engineer is properly qualified when a Certificate of Competency is issued.
Select one:

a. ANSI

b. ACI

c. SOPEEC

d. IPECC

e. ASME

Answer 14

d. IPECC

Question 15

It much easier to have changes made to a regulation than it is to have changes made to a/an:
Select one:

a. Edict

b. Proclamation

c. Act

d. Bill

e. Regulation

Answer 15

c. Act

Question 16

In general, all Acts will have the all of the following in common except:
Select one:

a. A listing of the Codes and standards that have not been adopted for use

b. The requirement for, and the methods of, inspecting, testing and certifying qualified repair and supervisory personnel will be clearly set out by the Act

c. The scope of the Act

d. The designation of a Director or Administrator and a description of their various responsibilities

e. The purpose of the Act will always be included

Answer 16

a. A listing of the Codes and standards that have not been adopted for use

Question 17

The regulations are usually under the governance of a/an _____ rather than the actual parliament.
Select one:

a. Inspector

b. Police Officer

c. Lawyer

d. Official of the government

e. Elected official

Answer 17

d. Official of the government

Question 18

This group of members of jurisdictional bodies meets at least annually answering to the ACI they ensure that all Power Engineer examinations meet the requirements set by the jurisdictional legislative bodies.
Select one:

a. ANSI

b. ACI

c. SOPEEC

d. IPECC

e. ASME

Answer 18

c. SOPEEC

Question 19

The Act then has _____ which are pursuant to the enforcement of the Act.
Select one:

a. Edicts

b. Laws

c. Regulations

d. Bills

e. Proclamations

Answer 19

c. Regulations

Question 20

What code regulates power boilers used in locomotive service?
Select one:

a. ASME B31.3.

b. ASME Section VII.

c. CSA B51.

d. ASME Section I.

e. CSA B52.

Answer 20

d. ASME Section I.