Got Wrong

Question 0

Signals from a thermistor are

Answer 0

Analog signal

Question 1

Signals from on/off switches are:

Answer 1

Digital signals

Question 2

Before they can be used by the central processing unit, analog input signals must be processed in the

Answer 2

ADC(analog to digital converter)

Question 3

The in and out process is the _____?

Answer 3

ADC (analog to digital converter)

DAC (digital to analog converter)

Question 4

Permanent memory is stored on

Answer 4

Both the ROM and PROM

Question 5

On board fault codes are read directly from the ECM through?

Answer 5

Blinking lights

Question 6

Which system has movable electrical contacts that carry current flow?

Answer 6

Electrical

Question 7

Motor principle states that?

Answer 7

Current carrying conductor within a magnetic field will move to the area of weaker magnetic field

Question 8

An open circuit voltage test is performed on a battery to determine

Answer 8

The state of charge of battery

Question 9

Battery negative and positive plates with separator a inbetween them are called a

Answer 9

Element

Question 10

Impedance as related to a voltmeter indicates:

Answer 10

The amount the meter will load the circuit

Question 11

A low resistance conductor that is connected in parallel with the ammeters moveable coil is called a:

Answer 11

Shunt