lingo and acronyms

Question 1

successor means what?

Answer 1

the route a packet can take

Question 2

metric

Answer 2

method that a routeing protocal uses to determian the best route.

Question 3

classfull ip address

Answer 3

ip address with out a csm only a default subnet mask

Question 4

useing classfull addressing whats the last useable ip for 192.168.0.0

given 30 hosts

Answer 4

192. 168.0.254 because the default subnet mask is 225.225.225.0 given that subnet, the last useable ip is
193. 168.0.254

Question 5

given the ip address 192.168.0.0

and the csm is 225.225.225.192

whats the brodcast ip address

for the ip address?

Answer 5

192.168.0.63

33-62 hosts

Question 6

whats route poisioning

Answer 6

route poidoning prevents a router from sending packets through a route that has become invalad.

Question 7

define interface

Answer 7

the point where two systems meet

Question 8

summarize these routes and explain how you did it

192. 168.5.2
193. 168.6.3

Answer 8

11000000.10101000.00000101.00000010

                       ^

11000000.10101000.00000110.00000011

                       ^

tha bit is the last similar bit between the two pi addresse, from left to right. everything to the right of that bit changes to a zero

11000000.10101000.00000100.00000000

the numberof bits before the first different bit is your cider

the cidr for this is /22

Question 9

1-2 hosts.

whats the ending number in the last octet of the csm

Question 10

what egrip command limist the bandwith of a gate way

Answer 10

To configure the percentage of bandwidth that may be used by Enhanced Interior Gateway Routing Protocol (EIGRP) on an interface, use the ip bandwidth-percent eigrp command in interface configuration mode. To restore the default value, use the no form of this command.

ip bandwidth-percent eigrp as-number percent

no ip bandwidth-percent eigrp as-number percent