2 May Test

Question 1

A situation where an unintended target is close to or approaching the edges of the safety firing arc is known as what?

Answer 1

Dangerous Proximity

Question 2

The CIWS shall not be switched to a firing mode until what is called from the aircraft?

Answer 2

“On Top”

Question 3

Define ”BRAVO BRAVO” (BB) during a firing serial.

Answer 3

Passed when a unit has completed their firing run

Question 4

With the exception of the PAC, what is the safety height for all CIWS air firings?

Answer 4

30,000 Ft

Question 5

What is the proper voice drill upon detection of a ”Non Target” visual or radar contact that appears in the declared ”Clear Firing Range” once the executive order to fire has been given?

Answer 5

”CHECK, CHECK, CHECK” range foul, position reporting the check fire and the reason

Question 6

True or False? The third MASS launcher danger zone must be kept free of personnel and equipment when firing MASS.

Answer 6

True

Question 7

Which area is NOT out of bounds during CIWS firing?

Answer 7

FX

Question 8

What is the code input for ARS in CIWS?

Answer 8

Code 002

Question 9

When is Frequency Agile used?

Answer 9

In a severe Jamming environment when clutter suppression is not necessary

Question 10

Which cells are allowed to carry DUERAS magazines?

Answer 10

A, C, F, H

Question 11

Which of the following is NOT a valid misfire drill method for the 57mm?

Answer 11

Primary Fictitious

Question 12

True or False? For the 57mm, when conducting a misfire drill during an AA towed target event,
primary locked on shall be used.

Answer 12

False

Question 13

On the 57mm, Define GWS in Green Alert.

Answer 13

Servos and hydraulics are activated, but no higher functions

Question 14

When is Pulse Doppler used?

Answer 14

In severe clutter environments. e.g. both sea and rain clutter at the same time

Question 15

During missile firing events, who makes up the Ship’s Weapon Safety Firing Organization? (

Answer 15

CO, OOW, ORO, DSO, MSO, SAC

Question 16

For the FCRs, define the system being in LOCK.

Answer 16

The radar pedestal is in a lock position, however it can still leak radiation while calibrating

Question 17

When is Moving Target Indicator used?

Answer 17

When fast frequency change due to jamming is desired combined with clutter suppression

Question 18

What are the Out Of Bounds areas for a CIWS firing?

Answer 18

Hangar Top, Flight Deck, AX

Question 19

What position must the mode switch be turned to and what indication is given that this safety
position is taken on the MASS manual panel. Prior to removing the Mass Key and approaching the Launcher?

Answer 19

The mode switch should be turned to Load and the SAFE lamp will illuminate indicating it is now safe to load MASS

Question 20

What Actions Does the CIWS Operator have to take when making CIWS electrically safe?

Answer 20

Hold Fire selected at the LCP or RCP

Question 21

On the FCRs, what are the six different Gun Target Assignments?

Answer 21

FCR A, FCR B, Window 1, 2, 3, and NGS

Question 22

True or False? AFT of the bridge wing doors are out of bounds for 57mm firing.

Answer 22

True

Question 23

On the MASS Launcher, a cell that contains a mounted DUERAS has what combination of ammunition?

Answer 23

3 OMNI TRAP and 1 DUERAS adaptor assembly

Question 24

When is the 57mm or CIWS considered loaded?

Answer 24

When ammunition is supplied to the feed system

Question 25

What position must the mode switch be turned to in order to move the MASS launcher manually?

Answer 25

Local