LP # 304A SCBA Flashcards

1
Q

WHAT IS THE PURPOSE OF THE SCBA?

A

Those apparatus in which the wearer
carries their own air supply that is entirely
independent of the outside atmosphere

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

WHAT IS THE PURPOSE OF THE SCBA?

A

Those apparatus in which the wearer
carries their own air supply that is entirely
independent of the outside atmosphere

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

WHAT WILL THE SCBA NOT PROTECT WEARER AGAINGST?

A
  1. The SCBA will not provide protection
    against gases, mists or vapors which are
    skin absorptive (e.g. hydrocyanic acid
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

HOW IS THE SCBA DESIGNED?

A

It is designed to provide the wearer with
respiratory protection while working in
hazardous atmospheres. This unit may be
used for entry into and escape from toxic
or oxygen deficient areas

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Which SCBA does the L.A.F.D. currently

utilize?

A
The L.A.F.D is currently using the new
state of the art “WARRIOR” SCBA. It has
a positive pressure, two-stage regulator
with an IntelliPASS system and Buddy
Breather Pouch with quick disconnect
fitting and 39” hose.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

WHAT ARE THE MAJOR COMPONENTS OF THE SCBA?

A
  1. Back pack and harness assembly
  2. Air Cylinder
  3. First stage regulator w/ alarm
  4. Second stage regulator
  5. Heads up display (HUD)
  6. Air pressure gauge w/PASS alarm
  7. Buddy breathing system (BBS)
  8. RIC/Universal air connection (UAC)
  9. Facepiece
  10. Voice progection unit (VPU)
  11. Last chance rescue filter
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

WHAT ARE THE RATINGS OF THE ATTACMENT POINTS ON THE BACKPACK HARNESS ASSEMBLY?

A

The backplate has three
integrated carrying handles with carabineer
attachment points. Each attachment point is
rated to 1,000 pounds. The air cylinder is
retained by a stainless steel band that
provides positive retention and requires two
independent actions to open.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

WHAT SIZE CYLINDER DOES THE SCBA HOLD?

A

requires two
independent actions to open. The stainless
steel band has adjustment points that allow
for the use of 45-minute or 60-minute air
cylinders.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

WHAT TYPE OF STRAPS ON THE BACKPACK HARNESS?

A

Designed for a secure, stable fit,
with weight concentrated at the hips, the
straps are made Kevlar and incorporate a
metal automotive-style waist buckle. The
waist straps adjust from both sides by pulling
on the yellow tabs keeping the SCBA
centered during donning.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

WERE IS THE SECOND STAGE REGULATOR SECURED?

A

A regulator belt clip
is attached to the left side waist strap for
storage of the second stage regulator. The
regulator belt clip is designed to keep the
second stage regulator clean and secure until
it is attached to the facepiece.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

WERE IS THE INTERMEDIATE PRESSURE HOSE LOCATED?

A

The intermediate pressure hose is routed over
the left shoulder and incorporates the
electrical/pneumatic connector. This
connection can only be made in the correct
orientation completing the air supply to the
second stage regulator and the electronics
required for the Heads-Up Display.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

WERE IS THE BATTERY COMPARTMENT LOCATED?

A

Located on the lower right side of the
backpack is the battery compartment that
houses four C size batteries.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

WHAT SUPPLIES THE SCBA OF POWER?

A

All electronics are supplied by these batteries except the Voice Amplifier. Amber LED’s on the PASS Device and the Backpack act as a battery
status indicator.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

THE AMBER LIGHTS FLASH HOW OFTEN WHAT IS INDICATED?

A

The amber LED’s will flash
once every 10 seconds to indicate a usable
battery condition. The amber LED’s will flash
every 2 seconds to indicate a low battery
condition.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

WHAT IS THE PURPOSE OF THE LED INFO LIGHTING?

A

A LED informational lighting component has
been added to the Warrior SCBA to allow the
user and surrounding crew members to
assess each unit’s status.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

WERE IS THE LIGHTING INDICATORS LOCATED?

A

All lighting on the
backpack assembly are located on the right
and left side of the air cylinder. Lighting on
the front of the SCBA is located on the
second-stage regulator and PASS device.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

HOW DO YOU DETERMINE THE BATTERY CONDITION?

A

Amber LED’s on the upper right rear of the
backpack and the front PASS device blink
once every 10 seconds to indicate a usable
battery condition. Blinking every two seconds
indicates a low battery condition.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

WHAT INDICATED A LOW BATTERY?

A

If a low battery condition occurs during use, an amber LED on the HUD will blink every second. The SCBA may continue to be used and the
batteries shall be replaced before the next
usage.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

WHAT DOES THE RED LED ABOVE THE BATTERY STATUS MEAN?

A

A red LED above the battery status light will
blink went the user’s remaining air supply has
reached ¼

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

WHAT HAPPENS WHEN THE TANK IS 1/4 FULL?

A

This will occur approximately at
the same time the audible low air alarm is
activating. A corresponding red LED on the
front of the HUD will blink warning others of
the users low air supply.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

WHAT LET OTHER PEOPLE KNOW THE STATUS OF YOUR SCBA?

A

Two LED’s, one on each side of the air
cylinder act as a visual reference to the PASS
device operation.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

HOW DOES YOUR SCBA ACT DURING NORMAL OPERATION?

A

During normal operation,
alternating green LED’s will blink once every
second. The LED lights will alternate blinking
green and red as the PASS device begins its
staged operation. At full alert, the red LED’s
will blink once every second.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

WHAT IS THE AIR CYLINDER MADE OF?

A

The air cylinder is made of a composite
carbon fiber construction (overwrapped with
fiberglass epoxy matrix) with an aluminum
inner liner and has a maximum working
pressure of 4500 PSI.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

WHAT INDICATES THE CYLINDER PRESSURE?

A

A pressure gauge,
built into the cylinder valve, indicates the
amount of air currently in the cylinder. The
gauge is graduated in 1000 lb. increments
from 0-6000 lbs with the full bottle range
(4000-5000 lbs.) identified in green

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

WHAT ARE THE TWO CYLINDER SIZES?

A

There are two sizes of air cylinders; 45 – minute and 60- minute.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

WHAT IS THE FULL CYLINDER VALUE

A

When full, the cylinders contain
65.6 and 87 cubic feet of air respectively and
will provide air supply time of 45 minutes
(65.6 cu ft.) or 60 minutes (87 cu ft.) at a user
rate of 40 liters per minute.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

WHEN ARE THE CYLINDERS CHANGED?

A

Air cylinder bottles are changed when the
cylinder gauge reads less than 4000 lbs. and
is sent to a Department approved air filling
station

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

HOW OFTEN ARE THE CYLINDERS TESTED?

A

Air cylinders are Hydrostatic tested every
FIVE years. Each year, approximately 33% of
the cylinder cache requires hydrostatic
testing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

WHAT ARE THE THREE IDENITFIYING COLORS FOR CYLINDERS?

A

There are three identifying color LFD
letters (red, blue, and black) to simplify recall
of these cylinders for testing. Once tested, the
vendor places a decal on the cylinder
identifying year and month of test

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

WERE IS THE FIRST STAGE REGULATOR HOUSED?

A

The first-stage regulator is housed and
protected within the backpack assembly. It
connects to the air cylinder valve using a high
pressure hose and a large, easy-to-grip
stainless steel hand wheel.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

THE 1ST STAGE REG REDUCES THE PRESSURE TO WHAT?

A

The first stage regulator lowers air cylinder pressure to approximately 115 psi, which is supplied to the second stage regulator via the
intermediate pressure hose.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

WHAT IS THE RELIEF VALVE?

A

A relief valve
activates to protect the system should the
regulator pressure exceed 200 to 225 psi

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

WERE IS THE HIGH PRESSURE CONNECTION LOCATED?

A

A high-pressure connection for the HUD
transducer, UAC, and the remote Pressure
Gauge/PASS Alarm on the right shoulder are
all housed and protected within the backpack
assembly.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

WHEN DOES THE LOW AIR ALARM EMIT ?

A

The integrated low air warning alarm emits an
audible-warbling whistle when the air cylinder
pressure reaches 1035 to 1215 psi. (23 to 27 %

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

HOW LONG WILL THE ALARM STAY ON?

A

The low air-warning whistle will
operate until air cylinder pressure drops below
200 psi. The whistle is located in the upper
left corner of the backpack and is protected
by the thermal and impact resistant enclosure.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

WHAT IS THE SECOND STAGE REGULATOR?

A

The second stage regulator attaches to the

facepiece using the Air Klic system.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

HOW DOES THE SECOND STAGE ACTIVATED?

A

The second stage regulator is
activated by the First Breath On mechanism
or by the manual override button on the front
of the regulator.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

HOW MUCH AIR CAN THE SECOND STAGE SUPPLY?

A

The second stage regulator is capable of
supplying the user in excess 350 liters per
minute of breathing air.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
39
Q

WHT IS THE PURPOSE OF THE RED BYPASS KNOB

A

The large red knob
on the regulator controls the adjustable
bypass valve. Turning the bypass valve knob
counterclockwise provides a constant flow of
breathing air. The bypass valve is intended
for emergency use only to supply breathing
air should regulator failure occur

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
40
Q

WHAT IS MAX LITER BREATHING AIR FOR THE BYPSSS?

A

The bypass valve is capable for supplying a maximum of 130 liters per minute of breathing air. When not in use the regulator should be stored in
the regulator belt clip located on the left waist
strap. The second stage regulator supplies
breathing air via an intermediate pressure
hose with a quick connect fitting.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
41
Q

WHAT ARE THE RELEASE BUTTONS?

A

Release buttons: The gray release buttons
are used to remove the regulator from the
holster and face piece. When removing the
regulator from the face piece, first press the
black shut-off button to turn off positive
pressure. Both gray release buttons must be
pressed simultaneously to remove the
regulator.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
42
Q

WHAT IS AND WERE IS THE SHUTOFF BUTTON?

A

Shut-off button: The black shut-off button is
located opposite the bypass valve. This
button is pressed before removing the
regulator from the face piece to shut off
airflow.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
43
Q

WHAT IS THE HUD AND WERE LOCATED?

A

The HUD is mounted as part of the second
stage regulator. When the second stage
regulator is attached to the facepiece, the
HUD display is visible through opening in the
facepiece nozzle cover.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
44
Q

WHAT IS ON THE HUD DISPLAY?

A

The display
consists of four green LED’s indicating from
right to left, Full, ¾, ½, and ¼.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
45
Q

WHAT IS THE INDICATION ON THE HUD DISPLAY?

A

A cylinder at
4500 psi will illuminate all 4 green LED’s. As
the pressure in the air cylinder decreases, the
LED’s turn off one at a time for each ¼ (25%)
drop in air cylinder pressure.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
46
Q

WHAT HAPPENS WHEN PRESSURE DROPS TO 50%

A

When the pressure drops below 50% of air
cylinder capacity, the LED representing ½
cylinder capacity starts to blink. The blinking
will continue for approximately 20 seconds
before returning to constant illumination.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
47
Q

WHT HAPPENS WHEN THE PRESSURE DROPS TO 25%

A

When the pressure drops below 25% of air
cylinder capacity, the LED representing ¼
cylinder capacity changes color to red and
starts to blink. A corresponding red LED on
the front of the HUD will blink warning others
of the users low air supply

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
48
Q

WHAT HAPPENS WHEN PRESSURE DROPS TO 10%

A

When the
pressure drops to 10% of air cylinder
capacity, the LED representing ¼ cylinder
capacity blinks noticeably faster. The LED on
the front will also increase is blinking rate.
The increased rate of blinking will continue
until air cylinder pressure drops below 200 psi
at which time the HUD will shut-off.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
49
Q

WHAT IS THE PURPOSE OF THE PHOTODIODE?

A

A photodiode on the top of the HUD adjusts
the green LED intensity so they are not a
distraction to the user.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
50
Q

WERE IS THE HIGH PRESSURE HOSE?

A

A high pressure air hose is routed over the
right shoulder strap and attach to the Air
Pressure Gauge/PASS Alarm assembly.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
51
Q

HOW IS THE AIR ILLUSTRATED ON THE PASS DEVICE?

A

Air pressure is illustrated from full
“F” to empty “E” using quarter increments “¼
½ ¾” similar to a fuel gauge on a vehicle

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
52
Q

WHAT HAPPENS WHEN YOU OPEN THE CYLINDER?

A

Opening the air cylinder valve arms the PASS
device as air pressurizes the system. An
ascending tone and alternating green flashing
LED lights indicate activation.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
53
Q

HOW DO YOU ACTIVATE THE PASS DEVICE?

A

The PASS device can be manually
triggered to full alert by depressing and
holding the red alarm button for 1 to 2
seconds. Once the PASS reaches full alert, it
can only be reset to normal operation by two
slow and deliberate clicks of the yellow reset
button the side of the housing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
54
Q

HOW DO YOU SHUT THE PASS DEVICE OFF?

A

Two additional slow and deliberate clicks of the
yellow reset button will shut-off the PASS
device if the air has been bleed from the
system.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
55
Q

WHAT WILL START THE STAGED ALARM?

A

Lack of movement will start the staged alarm
in approximately 20 seconds. The LED lights
will alternate flashing green and red.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
56
Q

WHEN WILL THE DEVICE INCREASE IN TONE IN STAGED ALARM?

A

The alarm will increase in volume approximately
every 5 seconds until full alert at 30 to 35
seconds. In full alert, the LED lights flash red
and the alarm tones alternate between the
front and rear mounted piezo speakers.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
57
Q

WHAT IS THE PASS DEVICE POWERED BY?

A

The PASS device is powered by the 4 C-cell
batteries in the backpack. An amber LED in
the PASS device acts as the battery status
indicator for the front of the SCBA.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
58
Q

WHAT IS THE BBS DESIGNED TO DO?

A

The Buddy Breathing System (BBS) is
designed to allow connection to a supplied air
line or another BBS. It is intended to supply
EMERGENCY AIR to a fire fighter who has
become lost, trapped, or disoriented in an
IDLH environment.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
59
Q

WERE IS THE BBS LOCATED?

A

The BBS is located in a
storage pouch on the wearers left hip and
consists of a 39 inch intermediate pressure
hose and a “Y” block with a male and female
quick connect.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
60
Q

WHAT HAPPENS WHEN BBS IS IN USE?

A

When two SCBA’s are connected using
the Buddy Breathing System there is no
transfer of air. The SCBA with the higher
intermediate pressure will automatically
supply both SCBA’s until that air is exhausted.

61
Q

WHAT IS THE SCBA EQUIPED WITH?

A

The Warrior SCBA comes equipped with the
Rapid Intervention Crew / Universal Air
Connection (RIC UAC). Located on the lower
left side of the backpack, the UAC has a dust
cover that must be used at all times.

62
Q

WHAT TYP OF CONNECTION IS THE UAC?

A

Connection to the UAC via the mating fill
coupling allows a one direction flow of air into
the user’s air cylinder. A directional flow
control piston is located in the quick
disconnect coupling to prevent accidental air
loss

63
Q

WHAT IS THE UAC INTENDED FOR?

A

The UAC is intended for refilling of an air
cylinder under an emergency situation. It
must never be used as a Buddy Breathing
device, for SCBA to SCBA filling, or as a
continuous air supply.

64
Q

WHAT IS THE SCBA MADE OF?

A

The Warrior SCBA 20/20 facepiece is made
of butyl rubber which enables it to pass the
CBRN certification test.

65
Q

WHAT IS TH PURPOSE OF THE VPU?

A

The Voice Projection Unit is designed to
facilitate verbal communication while wearing
a facepiece

66
Q

HOW DOES THE VPU WORK?

A

One depression of the power button
activates the VPU for two seconds. Two
consecutive pushes of the power button
activates the VPU for continuous use.

67
Q

WHAT TURNS THE VPU OFF?

A

Two
more consecutive pushes of the power button
will turn the VPU off.

68
Q

WHAT INDICATE THE VPU IS ON?

A

A red LED light is visible
to the user on the right side of the facepiece
to indicate the unit is on. An amber LED light
will blink to warn the user of a low battery.

69
Q

HOW IS THE VPU POWERED?

A

The VPU is powered by three AAA batteries
and can be changed in the field by opening
the battery compartment door at the front of
the housing. The VPU attaches to the right
side of the facepiece using an alignment tab
and a threaded knurled knob.

70
Q

WHT IS THE PURPOSE OF THE LAST CHANCE FILTER?

A

The last chance rescue filter provides an
emergency air filter, should the user become
lost or trapped in a hazardous environment
and deplete air cylinder pressure.

71
Q

HOW DOES THE LAST CHANCE FILTER WORK?

A

The filter does require increased
effort by the user to draw air through. Air
drawn into the filter will not be cooled

72
Q

HOW DOES THE LAST CHANCE FILTER WORK?

A

In fact, some heat is generated as carbon
monoxide is converted to carbon dioxide. The
cartridge will filter most toxic gases produced
through combustion, but will NOT
GENERATE OXYGEN.

73
Q

HOW LONG DOES THE FILTER LAST?

A

15 minutes of protection.

74
Q

WHEN IS THE LAST CHANCE FILTER USED?

A

The last chance rescue filter is intended for
use only in the most extreme of
circumstances when no other alternative is
available. The filter is designed for “one-time”
use.

75
Q

IF THE FILTER IS USED WHAT MUST BE DONE?

A

If the filter is deployed, the member must
forward an F- 225 to the Bureau of
Emergency Services outlining the
circumstances requiring its use, with an F-80
attached for replacement

76
Q

WHAT WILL THE SCBA NOT PROTECT WEARER AGAINGST?

A
  1. The SCBA will not provide protection
    against gases, mists or vapors which are
    skin absorptive (e.g. hydrocyanic acid
77
Q

HOW IS THE SCBA DESIGNED?

A

It is designed to provide the wearer with
respiratory protection while working in
hazardous atmospheres. This unit may be
used for entry into and escape from toxic
or oxygen deficient areas

78
Q

Which SCBA does the L.A.F.D. currently

utilize?

A
The L.A.F.D is currently using the new
state of the art “WARRIOR” SCBA. It has
a positive pressure, two-stage regulator
with an IntelliPASS system and Buddy
Breather Pouch with quick disconnect
fitting and 39” hose.
79
Q

WHAT ARE THE MAJOR COMPONENTS OF THE SCBA?

A
  1. Back pack and harness assembly
  2. Air Cylinder
  3. First stage regulator w/ alarm
  4. Second stage regulator
  5. Heads up display (HUD)
  6. Air pressure gauge w/PASS alarm
  7. Buddy breathing system (BBS)
  8. RIC/Universal air connection (UAC)
  9. Facepiece
  10. Voice progection unit (VPU)
  11. Last chance rescue filter
80
Q

WHAT ARE THE RATINGS OF THE ATTACMENT POINTS ON THE BACKPACK HARNESS ASSEMBLY?

A

The backplate has three
integrated carrying handles with carabineer
attachment points. Each attachment point is
rated to 1,000 pounds. The air cylinder is
retained by a stainless steel band that
provides positive retention and requires two
independent actions to open.

81
Q

WHAT SIZE CYLINDER DOES THE SCBA HOLD?

A

requires two
independent actions to open. The stainless
steel band has adjustment points that allow
for the use of 45-minute or 60-minute air
cylinders.

82
Q

WHAT TYPE OF STRAPS ON THE BACKPACK HARNESS?

A

Designed for a secure, stable fit,
with weight concentrated at the hips, the
straps are made Kevlar and incorporate a
metal automotive-style waist buckle. The
waist straps adjust from both sides by pulling
on the yellow tabs keeping the SCBA
centered during donning.

83
Q

WERE IS THE SECOND STAGE REGULATOR SECURED?

A

A regulator belt clip
is attached to the left side waist strap for
storage of the second stage regulator. The
regulator belt clip is designed to keep the
second stage regulator clean and secure until
it is attached to the facepiece.

84
Q

WERE IS THE INTERMEDIATE PRESSURE HOSE LOCATED?

A

The intermediate pressure hose is routed over
the left shoulder and incorporates the
electrical/pneumatic connector. This
connection can only be made in the correct
orientation completing the air supply to the
second stage regulator and the electronics
required for the Heads-Up Display.

85
Q

WERE IS THE BATTERY COMPARTMENT LOCATED?

A

Located on the lower right side of the
backpack is the battery compartment that
houses four C size batteries.

86
Q

WHAT SUPPLIES THE SCBA OF POWER?

A

All electronics are supplied by these batteries except the Voice Amplifier. Amber LED’s on the PASS Device and the Backpack act as a battery
status indicator.

87
Q

THE AMBER LIGHTS FLASH HOW OFTEN WHAT IS INDICATED?

A

The amber LED’s will flash
once every 10 seconds to indicate a usable
battery condition. The amber LED’s will flash
every 2 seconds to indicate a low battery
condition.

88
Q

WHAT IS THE PURPOSE OF THE LED INFO LIGHTING?

A

A LED informational lighting component has
been added to the Warrior SCBA to allow the
user and surrounding crew members to
assess each unit’s status.

89
Q

WERE IS THE LIGHTING INDICATORS LOCATED?

A

All lighting on the
backpack assembly are located on the right
and left side of the air cylinder. Lighting on
the front of the SCBA is located on the
second-stage regulator and PASS device.

90
Q

HOW DO YOU DETERMINE THE BATTERY CONDITION?

A

Amber LED’s on the upper right rear of the
backpack and the front PASS device blink
once every 10 seconds to indicate a usable
battery condition. Blinking every two seconds
indicates a low battery condition.

91
Q

WHAT INDICATED A LOW BATTERY?

A

If a low battery condition occurs during use, an amber LED on the HUD will blink every second. The SCBA may continue to be used and the
batteries shall be replaced before the next
usage.

92
Q

WHAT DOES THE RED LED ABOVE THE BATTERY STATUS MEAN?

A

A red LED above the battery status light will
blink went the user’s remaining air supply has
reached ¼

93
Q

WHAT HAPPENS WHEN THE TANK IS 1/4 FULL?

A

This will occur approximately at
the same time the audible low air alarm is
activating. A corresponding red LED on the
front of the HUD will blink warning others of
the users low air supply.

94
Q

WHAT LET OTHER PEOPLE KNOW THE STATUS OF YOUR SCBA?

A

Two LED’s, one on each side of the air
cylinder act as a visual reference to the PASS
device operation.

95
Q

HOW DOES YOUR SCBA ACT DURING NORMAL OPERATION?

A

During normal operation,
alternating green LED’s will blink once every
second. The LED lights will alternate blinking
green and red as the PASS device begins its
staged operation. At full alert, the red LED’s
will blink once every second.

96
Q

WHAT IS THE AIR CYLINDER MADE OF?

A

The air cylinder is made of a composite
carbon fiber construction (overwrapped with
fiberglass epoxy matrix) with an aluminum
inner liner and has a maximum working
pressure of 4500 PSI.

97
Q

WHAT INDICATES THE CYLINDER PRESSURE?

A

A pressure gauge,
built into the cylinder valve, indicates the
amount of air currently in the cylinder. The
gauge is graduated in 1000 lb. increments
from 0-6000 lbs with the full bottle range
(4000-5000 lbs.) identified in green

98
Q

WHAT ARE THE TWO CYLINDER SIZES?

A

There are two sizes of air cylinders; 45 – minute and 60- minute.

99
Q

WHAT IS THE FULL CYLINDER VALUE

A

When full, the cylinders contain
65.6 and 87 cubic feet of air respectively and
will provide air supply time of 45 minutes
(65.6 cu ft.) or 60 minutes (87 cu ft.) at a user
rate of 40 liters per minute.

100
Q

WHEN ARE THE CYLINDERS CHANGED?

A

Air cylinder bottles are changed when the
cylinder gauge reads less than 4000 lbs. and
is sent to a Department approved air filling
station

101
Q

HOW OFTEN ARE THE CYLINDERS TESTED?

A

Air cylinders are Hydrostatic tested every
FIVE years. Each year, approximately 33% of
the cylinder cache requires hydrostatic
testing

102
Q

WHAT ARE THE THREE IDENITFIYING COLORS FOR CYLINDERS?

A

There are three identifying color LFD
letters (red, blue, and black) to simplify recall
of these cylinders for testing. Once tested, the
vendor places a decal on the cylinder
identifying year and month of test

103
Q

WERE IS THE FIRST STAGE REGULATOR HOUSED?

A

The first-stage regulator is housed and
protected within the backpack assembly. It
connects to the air cylinder valve using a high
pressure hose and a large, easy-to-grip
stainless steel hand wheel.

104
Q

THE 1ST STAGE REG REDUCES THE PRESSURE TO WHAT?

A

The first stage regulator lowers air cylinder pressure to approximately 115 psi, which is supplied to the second stage regulator via the
intermediate pressure hose.

105
Q

WHAT IS THE RELIEF VALVE?

A

A relief valve
activates to protect the system should the
regulator pressure exceed 200 to 225 psi

106
Q

WERE IS THE HIGH PRESSURE CONNECTION LOCATED?

A

A high-pressure connection for the HUD
transducer, UAC, and the remote Pressure
Gauge/PASS Alarm on the right shoulder are
all housed and protected within the backpack
assembly.

107
Q

WHEN DOES THE LOW AIR ALARM EMIT ?

A

The integrated low air warning alarm emits an
audible-warbling whistle when the air cylinder
pressure reaches 1035 to 1215 psi. (23 to 27 %

108
Q

HOW LONG WILL THE ALARM STAY ON?

A

The low air-warning whistle will
operate until air cylinder pressure drops below
200 psi. The whistle is located in the upper
left corner of the backpack and is protected
by the thermal and impact resistant enclosure.

109
Q

WHAT IS THE SECOND STAGE REGULATOR?

A

The second stage regulator attaches to the

facepiece using the Air Klic system.

110
Q

HOW DOES THE SECOND STAGE ACTIVATED?

A

The second stage regulator is
activated by the First Breath On mechanism
or by the manual override button on the front
of the regulator.

111
Q

HOW MUCH AIR CAN THE SECOND STAGE SUPPLY?

A

The second stage regulator is capable of
supplying the user in excess 350 liters per
minute of breathing air.

112
Q

WHT IS THE PURPOSE OF THE RED BYPASS KNOB

A

The large red knob
on the regulator controls the adjustable
bypass valve. Turning the bypass valve knob
counterclockwise provides a constant flow of
breathing air. The bypass valve is intended
for emergency use only to supply breathing
air should regulator failure occur

113
Q

WHAT IS MAX LITER BREATHING AIR FOR THE BYPSSS?

A

The bypass valve is capable for supplying a maximum of 130 liters per minute of breathing air. When not in use the regulator should be stored in
the regulator belt clip located on the left waist
strap. The second stage regulator supplies
breathing air via an intermediate pressure
hose with a quick connect fitting.

114
Q

WHAT ARE THE RELEASE BUTTONS?

A

Release buttons: The gray release buttons
are used to remove the regulator from the
holster and face piece. When removing the
regulator from the face piece, first press the
black shut-off button to turn off positive
pressure. Both gray release buttons must be
pressed simultaneously to remove the
regulator.

115
Q

WHAT IS AND WERE IS THE SHUTOFF BUTTON?

A

Shut-off button: The black shut-off button is
located opposite the bypass valve. This
button is pressed before removing the
regulator from the face piece to shut off
airflow.

116
Q

WHAT IS THE HUD AND WERE LOCATED?

A

The HUD is mounted as part of the second
stage regulator. When the second stage
regulator is attached to the facepiece, the
HUD display is visible through opening in the
facepiece nozzle cover.

117
Q

WHAT IS ON THE HUD DISPLAY?

A

The display
consists of four green LED’s indicating from
right to left, Full, ¾, ½, and ¼.

118
Q

WHAT IS THE INDICATION ON THE HUD DISPLAY?

A

A cylinder at
4500 psi will illuminate all 4 green LED’s. As
the pressure in the air cylinder decreases, the
LED’s turn off one at a time for each ¼ (25%)
drop in air cylinder pressure.

119
Q

WHAT HAPPENS WHEN PRESSURE DROPS TO 50%

A

When the pressure drops below 50% of air
cylinder capacity, the LED representing ½
cylinder capacity starts to blink. The blinking
will continue for approximately 20 seconds
before returning to constant illumination.

120
Q

WHT HAPPENS WHEN THE PRESSURE DROPS TO 25%

A

When the pressure drops below 25% of air
cylinder capacity, the LED representing ¼
cylinder capacity changes color to red and
starts to blink. A corresponding red LED on
the front of the HUD will blink warning others
of the users low air supply

121
Q

WHAT HAPPENS WHEN PRESSURE DROPS TO 10%

A

When the
pressure drops to 10% of air cylinder
capacity, the LED representing ¼ cylinder
capacity blinks noticeably faster. The LED on
the front will also increase is blinking rate.
The increased rate of blinking will continue
until air cylinder pressure drops below 200 psi
at which time the HUD will shut-off.

122
Q

WHAT IS THE PURPOSE OF THE PHOTODIODE?

A

A photodiode on the top of the HUD adjusts
the green LED intensity so they are not a
distraction to the user.

123
Q

WERE IS THE HIGH PRESSURE HOSE?

A

A high pressure air hose is routed over the
right shoulder strap and attach to the Air
Pressure Gauge/PASS Alarm assembly.

124
Q

HOW IS THE AIR ILLUSTRATED ON THE PASS DEVICE?

A

Air pressure is illustrated from full
“F” to empty “E” using quarter increments “¼
½ ¾” similar to a fuel gauge on a vehicle

125
Q

WHAT HAPPENS WHEN YOU OPEN THE CYLINDER?

A

Opening the air cylinder valve arms the PASS
device as air pressurizes the system. An
ascending tone and alternating green flashing
LED lights indicate activation.

126
Q

HOW DO YOU ACTIVATE THE PASS DEVICE?

A

The PASS device can be manually
triggered to full alert by depressing and
holding the red alarm button for 1 to 2
seconds. Once the PASS reaches full alert, it
can only be reset to normal operation by two
slow and deliberate clicks of the yellow reset
button the side of the housing

127
Q

HOW DO YOU SHUT THE PASS DEVICE OFF?

A

Two additional slow and deliberate clicks of the
yellow reset button will shut-off the PASS
device if the air has been bleed from the
system.

128
Q

WHAT WILL START THE STAGED ALARM?

A

Lack of movement will start the staged alarm
in approximately 20 seconds. The LED lights
will alternate flashing green and red.

129
Q

WHEN WILL THE DEVICE INCREASE IN TONE IN STAGED ALARM?

A

The alarm will increase in volume approximately
every 5 seconds until full alert at 30 to 35
seconds. In full alert, the LED lights flash red
and the alarm tones alternate between the
front and rear mounted piezo speakers.

130
Q

WHAT IS THE PASS DEVICE POWERED BY?

A

The PASS device is powered by the 4 C-cell
batteries in the backpack. An amber LED in
the PASS device acts as the battery status
indicator for the front of the SCBA.

131
Q

WHAT IS THE BBS DESIGNED TO DO?

A

The Buddy Breathing System (BBS) is
designed to allow connection to a supplied air
line or another BBS. It is intended to supply
EMERGENCY AIR to a fire fighter who has
become lost, trapped, or disoriented in an
IDLH environment.

132
Q

WERE IS THE BBS LOCATED?

A

The BBS is located in a
storage pouch on the wearers left hip and
consists of a 39 inch intermediate pressure
hose and a “Y” block with a male and female
quick connect.

133
Q

WHAT HAPPENS WHEN BBS IS IN USE?

A

When two SCBA’s are connected using
the Buddy Breathing System there is no
transfer of air. The SCBA with the higher
intermediate pressure will automatically
supply both SCBA’s until that air is exhausted.

134
Q

WHAT IS THE SCBA EQUIPED WITH?

A

The Warrior SCBA comes equipped with the
Rapid Intervention Crew / Universal Air
Connection (RIC UAC). Located on the lower
left side of the backpack, the UAC has a dust
cover that must be used at all times.

135
Q

WHAT TYP OF CONNECTION IS THE UAC?

A

Connection to the UAC via the mating fill
coupling allows a one direction flow of air into
the user’s air cylinder. A directional flow
control piston is located in the quick
disconnect coupling to prevent accidental air
loss

136
Q

WHAT IS THE UAC INTENDED FOR?

A

The UAC is intended for refilling of an air
cylinder under an emergency situation. It
must never be used as a Buddy Breathing
device, for SCBA to SCBA filling, or as a
continuous air supply.

137
Q

WHAT IS THE SCBA MADE OF?

A

The Warrior SCBA 20/20 facepiece is made
of butyl rubber which enables it to pass the
CBRN certification test.

138
Q

WHAT IS TH PURPOSE OF THE VPU?

A

The Voice Projection Unit is designed to
facilitate verbal communication while wearing
a facepiece

139
Q

HOW DOES THE VPU WORK?

A

One depression of the power button
activates the VPU for two seconds. Two
consecutive pushes of the power button
activates the VPU for continuous use.

140
Q

WHAT TURNS THE VPU OFF?

A

Two
more consecutive pushes of the power button
will turn the VPU off.

141
Q

WHAT INDICATE THE VPU IS ON?

A

A red LED light is visible
to the user on the right side of the facepiece
to indicate the unit is on. An amber LED light
will blink to warn the user of a low battery.

142
Q

HOW IS THE VPU POWERED?

A

The VPU is powered by three AAA batteries
and can be changed in the field by opening
the battery compartment door at the front of
the housing. The VPU attaches to the right
side of the facepiece using an alignment tab
and a threaded knurled knob.

143
Q

WHT IS THE PURPOSE OF THE LAST CHANCE FILTER?

A

The last chance rescue filter provides an
emergency air filter, should the user become
lost or trapped in a hazardous environment
and deplete air cylinder pressure.

144
Q

HOW DOES THE LAST CHANCE FILTER WORK?

A

The filter does require increased
effort by the user to draw air through. Air
drawn into the filter will not be cooled

145
Q

HOW DOES THE LAST CHANCE FILTER WORK?

A

In fact, some heat is generated as carbon
monoxide is converted to carbon dioxide. The
cartridge will filter most toxic gases produced
through combustion, but will NOT
GENERATE OXYGEN.

146
Q

HOW LONG DOES THE FILTER LAST?

A

15 minutes of protection.

147
Q

WHEN IS THE LAST CHANCE FILTER USED?

A

The last chance rescue filter is intended for
use only in the most extreme of
circumstances when no other alternative is
available. The filter is designed for “one-time”
use.

148
Q

IF THE FILTER IS USED WHAT MUST BE DONE?

A

If the filter is deployed, the member must
forward an F- 225 to the Bureau of
Emergency Services outlining the
circumstances requiring its use, with an F-80
attached for replacement