Holding Procedures Flashcards
In what direction is a standard holding pattern to be flown?
A right hand holding pattern is standard unless the chart depicts, or ATC directs, otherwise.
(Jepp Term - AU 5)
What are the speed limitations in a holding pattern?
Up to and incl FL140: - 230kts or - 170kts (approach for CAT A and B only) Above FL140 and up to and incl FL200: - 240kts Above FL 200: - 265kts (Jepp Term - AU 5)
When does the outbound timing on a holding pattern commence?
Timing begins abeam the fix or on attaining the outbound heading, whichever comes later.
(Jepp Term - AU 5)
What are the outbound time / distance limitations in a holding pattern?
Up to and incl FL140:
- 1 min or time or distance limit specified on the chart
Above FL140:
- 1.5min or time or distance limit specified on the chart. (Jepp Term - AU 5)
What are the turn limitations in a holding pattern?
All turns in nil wind should be at a bank angle of 25 degrees or Rate One, whichever requires the lesser bank. (Jepp Term - AU 5)
What can be done to adjust for winds in a holding pattern?
Heading and timing may be adjusted to compensate for the effects of wind to ensure the inbound track is regained before passing the holding fix inbound.
(Jepp Term - AU 5)
When determining the type of entry into a holding pattern is heading or track used?
Heading
Jepp Term - AU 6
How many degrees flexibility does a pilot have when choosing the type of holding pattern entry?
5 degrees either side of the sector boundaries.
Jepp Term - AU 6
May a pilot shorten or lengthen a holding pattern?
Yes, a holding pattern may be shortened to exit the pattern at a specified time or it may be lengthened subject to ATC approval and terrain clearance. (Jepp Term - AU 6)
May an aircraft descend in a holding pattern?
Yes, an aircraft may descend in a holding pattern subject to ATC approval and provided it doesn’t descend below the minimum altitude specified for the hold. (Jepp Term - AU 6)
