Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

physics as > chapter 4 > Flashcards

chapter 4 Flashcards

1
Q

state Hooke’s law.

A

the extension of a stretched wire, e, is proportional to the load or force, F : F = ke k is the stiffness of the constant

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

how does Hooke’s law apply to springs?

A

because the extension or compression of a spring is proportional to the force applied. For a spring , k has the same value whether the forces are tensile or compressive

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

define tensile forces and compressive forces

A

tensile F: stretch the spring

compressive F: squash the spring

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

what is meant by the elastic limit?

A

the load gets great enough and past the elastic limit the material will be permanently stretched. When all the force is removed, the material will be longer than at the start

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

what is elastic deformation?

A

where the material returns to its original shape once the forces are removed

1) when the material is put under tension, the atoms of the material are pulled apart from one another
2) atoms can move small distances relative to their equilibrium positions, without actually changing positions in the material
3) once the load is removed , the atoms return to their equilibrium distance apart

for a metal elastic deformation happens as long as Hooke’s law is obeyed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

what is plastic deformation?

A

the material is permanently stretched

1) some atoms in the material move position relative to one another
2) when the load is removed the atoms don’t return to their original positions

a metal stretched past its elastic limit shows plastic deformation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

if the forces stretch a material then they are?

A

tensile

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

if the forces squash the material then they are?

A

compressive

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

define tensile stress

A

the force per unit area acting perpendicular to the area stress= F/A

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

what are the units of tensile stress?

A

Nm ^-2 or Pa

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

define tensile strain

A

the change in length (extension) divided by the original length of the material
strain = e/ l

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

why does strain have no units?

A

because it is a ratio so it is just the number of something

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

what is the breaking stress?

A

a stress big enough to break the material

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

how does a material break?

A

the effect of stress is to start to pull the atoms apart from one another
eventually the stress becomes so great that atoms separate completely, and the material breaks

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

what is fracture stress?

A

the stress at the point on the graph where it ends

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

what is the UTS?

A

ultimate tensile stress- the maximum stress that a material can withstand

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

what does a material experience if you apply a load?

A

tensile stress and tensile strain

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

when are stress and strain proportional to eachother?

A

at the limit of proportionality

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

below the limit of proportionality stress/ strain is a constant, what is it called?

A

the Young modulus, E, how much a material deflects under a given load

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

what are the units for the Young modulus?

A

Nm^-2 or pascals

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

young modulus=

A

tensile stress/ tensile strain = (F/A) / (e/l)= Fl/ eA

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

experiment to find the young modulus of a wire:

A

1) long thin wire- longer and thinner means it extends more for the same force
2) start with the smallest weight necessary to straighten the wire
3) measure the distance between the fixed end of the wire and the marker- unstretched length
4) if you increase the weight, the wire stretches and the marker moves
5) increase the weight by steps, recording the marker reading each time- the extension is the difference between this reading and the unstretched length
6) once you’ve taken all your readings, use a micrometer to measure the diameter of the wire in several places. take an average of your measurements and use that to work out the average cross-sectional area of the wire

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

behaviour of a brittle material:

A

doesn’t undergo plastic deformation and breaks soon after its elastic limit
. they can also be quite weak if they have cracks in them

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

behaviour of a ductile material:

A

change the shape by drawing it into wires or other shapes. They keep their strength when they’re deformed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

example of a ductile material:

A

copper- high electrical conductivity so ideal for electric wires

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

behaviour of a malleable material:

A

shape can be changed but may lose their stength: hammered or rolled into shape
example: gold, brass

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

behaviour of a hard material:

A

resistive to dents and scratches, unit is pascals example: diamond

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

behaviour of a stiff material:

A

resistance to deformation. high resistance to bending and stretching. measured by the young modulus- the higher the value the stiffer the material
Changes it’s shape only slightly under elastic loads

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

behaviour of tough materials:

A

unit= J m^-2 undergo considerable plastic deformation before they break, it is a measure of the energy a material can absorb before breaking

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

how is toughness defined?

A

either a) the energy required to create new surface area: J/m^2
b) the energy absorbed per unit volume : J/m^3

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

define strong

A

a large stress is needed to cause failure

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

define strength

A

the maximum stress a material can withstand before failure

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

why do some materials have 2 values for strength?

A

because there are two types of failure: yielding and breaking/ fracture

34
Q

draw a stress-strain graph for a ductile material

A

4 points: straight line- obeying hooke’s law
limit of proportionality- material stops obeying hooke’s law but would still return to its original shape
elastic limit= material starts to behave plastically- from this point onwards, the material would no longer return to its original shape
point y- yield point- the material starts to stretch without any extra load

35
Q

what is the yield point?

A

it is the stress at which a large amount of plastic deformation takes place with a constant or reduced load

36
Q

what 3 things determine resistance?

A

1) length- the longer the wire the more difficult it is to make a current flow
2) area- the wider the wire the easier it will be for the electrons to pass along it
3) resistivity depends on the material. the structure may make it easy or difficult for charge to flow

37
Q

in general what does resistivity depend on?

A

environmental factors eg temperature or light intensity

38
Q

define resistivity

A

the ability of a material to resist a current: the resistance of a 1 m length with a 1 m^2 cross- sectional area. it is measure in ohm-metres

39
Q

what is the equation for resistivity?

A

p= RA/ l or R= p x l/A

40
Q

what is the inverse of resistivity and define it

A

measure a material’s ability to conduct an electric current. conductivity is the conductance of a 1 m length with a 1 m^2 cross-sectional area. it’s measure in siemens per metre S m^-1.

41
Q

what is the equation for conductivity?

A

conductivity= Gl/ A or G= conductivity x A/l

42
Q

experiment to find the resistivity of a wire

A

1) measure out a length of wire made from the material you want to test using a millimetre ruler
2) use a micrometer to measure the diameter of a piece of wire in several places. Take an average of your measurements, and use that to work out the average cross-sectional area of the wire
3) connect a length of wire into an electrical circuit as shown, ensuring that current can flow through the entire length of wire.
4) record the resistance of the wire using a micrometer, and take lots of readings for different lengths of wire
5) plot a graph of R against l- the gradient = p/A so times by A to get the resistivity

43
Q

in a metal what are the charge carriers?

A

free electrons

44
Q

why are metals good conductors?

A

because they have a sea of delocalised electrons so the charge carrier density is high

45
Q

how does temperature effect the conductivity of a metal?

A

increase the temp: the no. of charge carriers stays about the same. As the electrons move, they scatter from the metallic lattice. As the temp increases, the lattice vibrates more, increasing the electron scattering, so the electrons are slight less free to move. This means that as the temp increases, the conductivity of a metal will slightly decrease.

46
Q

how does temperature effect the conductivity of a semiconductor?

A

have much lower charge carrier density than metals so have a lower conductivity. as u increase temp, more electrons are freed to conduct. this means that as temp increases, the conductivity of a semiconductor rapidly increases.

47
Q

why can’t insulators conduct?

A

a perfect insulator wouldn’t have any charge carriers so wouldn’t be able to conduct at all

48
Q

what does a conductive metal depend on?

A

it’s charge carrier density- how many charge carriers there are per unit volume of material

49
Q

what is energy?

A

the capacity of a body to do work

50
Q

work done =

A

force x distance

51
Q

in a force distance graph, the area underneath the graph is?

A

the workdone

52
Q

for a spring what increases with extension?

A

force

53
Q

the area under a force extension graph is ?

A

energy

54
Q

what is the energy stored in a stretched spring and why?

A

1/2 Fe = 1/2 ke^2 since F=ke and k is the spring constant because the work done is stored in the spring as elastic energy

55
Q

what is the tension in a stretched wire related to?

A

the extension of the wire

56
Q

examples of conductors

A

steel, bronze, nickel,iron, silver, copper, gold

57
Q

examples of insulators

A

polystyrene, perspex, lead glass, aluminium,

58
Q

examples of semi conductors

A

pure silicon, pure germanium, doped germanium

59
Q

what is a zero error?

A

haven’t properly zeroed your instruments- end up with a systematic error so every reading is wrong by the same amount

60
Q

what are random errors?

A

can’t get rid of them, get a random error in any measurement. might be because you can’t keep controlled variables exactly the same throughout the experiment

61
Q

What is tensile yield strength?

A

A stress at which plastic deformation begins. From this point onwards the material won’t go back to it’s original length

62
Q

What is the structure of metals?

A

Crystalline lattice where the metal atoms are arranged in a regular repeating pattern. They have a sea of delocalised electrons that make them good conductors
The electrostatic attraction between the ion lattice and the free electrons forms the metallic bond. It’s these strong bonds that make metals stiff

63
Q

What makes a metal tough?

A

The strongly bonded lattice structure

64
Q

What makes a metal ductile?

A

The ions within the lattice can move when you apply a force to the metal

65
Q

How are ceramics made?

A

By melting certain materials and letting them cool

66
Q

What is the structure of a ceramic?

A

Arrangement of atoms can be crystalline or polycrystalline where there are many regions or grains of crystalline structure. the atoms in each grain line up in a different direction

67
Q

Structure of glass

A

Amorphous- no overall pattern; the atoms are arranged at random

68
Q

What makes ceramics stiff and what makes them brittle?

A

Atoms in a ceramic are either ionically or covalently bonded in a giant rigid structure. The strong bonds between the atoms makes ceramics stiff and the rigid structure makes them brittle

69
Q

What is the structure of a polymer

A

Molecular chain made up of a single repeating unit called a monomer. The monomers are covalently bonded together, so are very hard to separate so makes them STRONG

70
Q

Natural polymer

A

Rubber

71
Q

Man made polymer

A

Polythene

72
Q

What’s makes polymers flexible

A

By rotating about their bonds when u pull them- The more easily the monomers can rotate, the more flexible the polymer will be

73
Q

What affects the polymers flexibility

A

The strength and number of bonds between the chains

74
Q

What makes a polymer more rigid

A

The stronger the cross-linking bonds and the more cross-linking bonds you’ve got the more rigid the material

75
Q

What are composites

A

You combine two different materials to get material with the properties you want

76
Q

What is one of the most common composites

A

Reinforced concrete- normal concrete is strong when u compress it but is brittle under any sort of tension force like being bent. To increase the strength of the concrete under tension, you embed steel rods into it

77
Q

What makes a material flexible

A

Large strain for a little stress

78
Q

What makes a material stiff

A

Little strain for large stress

79
Q

If u double the area what happens to resistance

A

You half the resistance R/2

80
Q

If u double the area what happens to conductance

A

It doubles

81
Q

If u double the length what happens to resistance

A

It doubles

82
Q

If u double the length what happens to conductance

A

It halves

physics as (7 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions