36" Cam Tool - CHRT

Question 0

What are the indicators for lock/unlock?

Answer 0

2 white indicator lines on the mandrel at the indicator cap. Bottom line is unlocked and top line is locked

Question 1

How many turns to operate the tool?

Answer 1

3 turns. Left to lock, right to unlock

Question 2

What is the load capacity of the tool?

Answer 2

1,000,000 lbs

Question 3

What makes the locking dogs extend and retract?

Answer 3

Can taper interface on the mandrel

Question 4

What retains the locking dogs to the tool?

Answer 4

8 locking dog retainer screws

Question 5

What threads are on the connections of the tool?

Answer 5

6 5/8” REG box and 4 1/2” IF pin

Question 6

What is the size, quantity, and purpose of the flow-by ports?

Answer 6

There are four 3” ports - 28.27 inches squared that enable trapped air to be vented while lowering the tool into the splash zone as well as returns while jetting in

Question 7

Where is the 1/2” check valve located?

Answer 7

On the top of the tool body by the indicator cap. It helps prevent hydrostatic pressure.

Question 8

What is the purpose of the anti-rotation keys?

Answer 8

They stop the tool from turning while it is being functioned

Question 9

List the location and purpose of the seals

Answer 9

O-Ring on tool body OD seals between tool body and housing for jetting in

Mandrel has 2 upper and 2 lower O-Rings

Indicator cap OD has one O-Ring

Locking dogs have O-Ring as trash seal