Quiz 3 Flashcards

1
Q

Outline the advantages of Autumn lambing in a prime lamb production system in southern NSW.

A

Higher lamb prices due to it being off season.
Higher quality of feed when finishing off as this aligns with Spring flush.
Low fly strike rates.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Outline the disadvantages of Autumn lambing in a prime lamb production system in southern NSW.

A

Higher mortality rate due to colder climate.
Rely on winter rainfall for pasture growth, if there isn’t enough supplementary feeding may be required until spring flush, increasing production costs.
Shorter days and sunlight, out of season breeding.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Outline why border Leicester-Merino cross ewes are preferred as prime lamb mothers over purebred Merino ewes.

A

Hybrid vigour.
Merinos have poor mothering ability, smaller size and low fecundity. BL have moderately high fecundity, larger size, high growth rates and good carcass shape and contribute these characteristics to their crossbreed offspring.
Merinos in BCS3 wean 80% lambs, BL in BCS3 wean 120% lambs.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Describe the two tiered production system of prime lamb production.

A

First tier involves merino ewes being mated to Romneys or BL Rams. These crossbreed ewe progeny are then mated to a terminal meat sheep sire such as poll Dorset, Texel or Suffolk to produce second cross progeny to be sold as meat lambs.
Provides more efficient meat production due to hybrid vigour gained from previous crosses.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Name 3 breeds of sheep that are commonly used as sires for prime lamb production in Australia. Briefly outline the key characteristics of each breed.

A

Texel-lean breed of medium size with long, rectangular body. Medium bone structure, pronounced muscling and good growth rates. Excellent carcass quality.
Poll Dorset-shorter boned with compact frames, account for over 70% of lambs produce in Aus. High growth rates and good shaped carcass.
Suffolk-well muscled, lean with good growth rate, Rams have high fertility even in hot summer conditions and excellent libido, allowing for lower ram to ewe ratio.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Explain the meaning of DSE. For what purpose can it be used and what are its limitations?

A

Dry sheep equivalent. 1 DSE=feed requirements of adult 50kg, 2yo wether for maintenance.
Purpose to compare feeding requirements of different classes of stock, assess carrying capacity, assess potential productivity of farm or patch of land.
Limitations involved include assumptions that have been placed on variables including climate, topography, pasture quality and quantity, water availability.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Describe why animal health and welfare is an important priority for sheep enterprises in Australia.

A

Animal health and welfare are important as they provide a benchmark for farmers and encourage them to produce the best quality product using the best welfare practices as per the 5 freedoms. Important for sheep as there are range of practices during production that can negatively impact welfare-marking, mulesing, etc.
Improper management can lead to poorer production, negatively affecting end product and damaging international trade.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Describe the best practice procedures for marking in a spring lambing merino flock in southern NSW.

A

Marking done as early as possible to minimise pain to animal, ideally prior to weaning (approx 6wks old, NOVEMBER). Ear marking uses applicators in good working order, disinfect between animals, adequately restrained head with tag applied to centre of ear away from longitudinal ridges. Castration either surgically with sharp, sterilised lamb marking knife or via elastrator method. If older than 6months vet must be used.
Tail docking done using sterilised lamb marking knife, gas heater de-tailer, elastrator rings. Severance occurs level with tip of vuvla or below second palpable tail joint. If using knife, bare skin beneath tail should be pushed forward just prior to severance, leaving flap of skin to heal over bottom of cut tail.
Lambs should not be marked if showing signs of overheating or over excitement-excess bleeding. Should not be held in yards, ewes should have adequate water to reduce risk of deserting lambs upon release from yards. Ewes up to date with tetanus vaccine to ensure lambs have immunity.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Describe recommendations you would provide to producer for weaning her lambs in a spring lambing prime flock near Wagga.

A

Don’t wean til youngest are at least 8wks and above 20kgs. Wean early December, post marking. Depending on state of pasture may need to supp feed with high protein ration (grains-oats, lupins, lamb pellets) to ensure weight gain continues. Ensure water and shade are easily accessible due to summer conditions. Frequently check health and welfare-particularly fly strike. Release onto low worm pasture.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Describe the recommendations you would provide to a producer for weaning his lambs in a spring merino flock near Wagga.

A

Wean early December post clutching and mulesing at marking. Paddocks should be high quality feed, low grass seed infestation, low worm risk and good quality stock water. Away from ewes with good fences. No contact with other mobs on property.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What are the main factors that influence lamb growth and discuss how they can be optimised.

A

Two main factors; birth weight and nutrition. Nutrition affected by level of ewe lactation, wether she has twins or single lamb, condition score of ewe at lambing, current nutritional status of ewe and her fat reserves.
Difficult to optimise birth weight due to uncontrollable factors, ensuring ewe is receiving 1.7X maintenance daily in last trimester increases likelihood of healthy lamb.
Nutrition optimised by ensuring ewe is receiving adequate energy for lactation. Producing 2-3kg milk requires 20-30MJME daily. Ensuring lamb is receiving milk is important, lambs require 1.5kg for maintenance, every kg afterwards sustains growth rate of approx. 330g per day, decreasing to 270g later in lactation.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What are nutritional requirements for lactating ewes?

A

2-2.5X maintenance.

Maintenance is 8-10MJME

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Discuss how nutritional requirements for lactating ewes can be met and monitored in an Autumn lambing flock in northern Victoria.

A

Condition scoring is an important tool for monitoring ewe nutritional status and body reserves, if condition is dropping to low 3 or less supplementary feeding should commence to meet energy requirements for both ewe and lamb.
If adequate rain hasn’t fallen over Autumn the pasture quality is low and supp feeding and irrigation may also be necessary.
Feed intake peaks 8wks post lambing so ewes should be properly monitored over this phase.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Discuss advantages and disadvantages of different lamb finishing systems.

A

Three forms; pasture, lambs finished on crop residue, lamb lot feeding. Pasture systems need to time with spring flush to ensure adequate feed for either the weaned or sucker lambs. Sucker lambs are low maintenance and rely on nutrition of the ewe and her milk production for growth while weaner lambs are sold as heavier carcass lambs and have higher management needs.
Lambs finished on crop residue is cheap alternative to feedlots, often lack in energy and protein and so require supp feeding. Lupin stubble is often used as higher energy and protein however risk of lupinosis.
Lamb lot feeding provides consistent supply of quality lamb all year to consumers. Not reliant on rainfall and pasture growth. Lot feeding utilises ‘feeder lambs’ from specialist producers only, labour intensive, higher disease risk due to high density of animals.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Describe steps involved in clinical exam of sheep.

A

History-flock/mob, farm husbandry and practices.
Group/mob examination-from distance in paddock or large yard. Determine proportion of affected animals, severity of problem. Another opportunity to gain more history and asses farm practices.
Single out affected sheep after having observed them from distance. Assess body condition, use 5Ts as basic structure for close up exam.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What are anthelmintics used for in sheep?

A

Anti parasitic drugs used to treat and control internal parasites such as worms and liver fluke. Administered in form of drenches.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

List common groups of anthelmintics available.

A

Broad spectrum/Major: benzimidazoles (white drenches), levamisole/morantel (clear drenches), macrocyclic lactones (MLs)/mectins.
Narrow spectrum/minor: organophosphates (naphthalophos), triclabendazole, salicylanilides (closantel, oxyclozanide).
Combination drenches - benzimidazole and levamisole, albendazole and closantel. Act on multiple parasites at different stages.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

Discuss important considerations when using anthelmintics and the reasons.

A

Dose appropriate to body weight, consistent under or over dosing leads to resistance.
Certain drenches can be lethal if overdosed-organophosphates.
Dose only when required-faecal egg count.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

What are vaccines used for in sheep?

A

Vaccination allows protection against some of the common and serious infectious diseases via the stimulation of antibodies against the particular disease. Allows protection against production loss.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

List some common types of vaccines used in sheep.

A

Clostridial-5 in 1 or 2 in 1. Cover against enterotoxaemia(pulpy kidney), tetanus, blacks disease, blackleg, malignant oedema.
Caseous lymphadenitis (CLA, cheesy gland)-in combination with clostridial vaccines, 6 in 1 or 3 in 1.
Scabigard, Gudair, anthrax.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

What are important considerations when using vaccines and why?

A

Herd immunity can be obtained by vaccinating 70-80% herd. Only administer to healthy animals, majority are SC and should be administered in areas with easily accessible skin where they won’t affect meat quality.
Care needs to be taken by administrator to not inject themselves.
Vaccines need to be stored in fridge and out of direct sunlight.
Administration at appropriate times important to ensure adequate immunity-annual boosters. WHP considered.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

Discuss important factors and reasons that need to be considered in the management of sheep lice infestation in a fine merino wool sheep flock.

A

Lice effect quality of wool and so need fast and effective treatment. Lice are obligate parasites so they spend entire life cycle on the sheep, treatment involves chemical such as organophosphates or insect growth regulators. Every sheep must be treated to ensure no reinfestaion. Shearing should be considered as remove 90% of lice which die in wool bale and chemicals applied to sheep post shearing kill rest. WHP need to be observed for wool.
No contact with other mobs, don’t introduce new animals without inspecting.
Check shearers aren’t infested from previous jobs (clothing and shoes).

23
Q

Discuss why anthelmintics resistance is a concern for sheep enterprises.

A

Increased resistance leads to decreased effectiveness of treatments and therefore loss in production for farmers.

24
Q

Discuss some strategies that reduce the risk of anthelmintics resistance developing quickly on property.

A

Dosing appropriate to body weight, dosing only when required.
Faecal egg counts.

25
Q

Describe the national livestock identification system for sheep in Australia and discuss why it is important.

A

Designed to identify and trace ruminants from the property they were born on through to slaughter. Put in place after mad cow disease outbreaks, mob based system for sheep underpinning bio security, food safety and market access. Allows for quick containment of major food safety or disease outbreaks if they occur.
System involves colour coded tags for year born with PIC and ID number. Allow for easy identification when recording movements on national vendor declarations (NVD) and transport stock statements (TSS). Both important traceability documents uploaded to NLIS database.

26
Q

Name 3 breeds of sheep that are commonly used as sires for prime lamb production in Australia. Briefly outline the key characteristics of each breed.

A

Texel-lean breed of medium size with long, rectangular body. Medium bone structure, pronounced muscling and good growth rates. Excellent carcass quality.
Poll Dorset-shorter boned with compact frames, account for over 70% of lambs produce in Aus. High growth rates and good shaped carcass.
Suffolk-well muscled, lean with good growth rate, Rams have high fertility even in hot summer conditions and excellent libido, allowing for lower ram to ewe ratio.

27
Q

Explain the meaning of DSE. For what purpose can it be used and what are its limitations?

A

Dry sheep equivalent. 1 DSE=feed requirements of adult 50kg, 2yo wether for maintenance.
Purpose to compare feeding requirements of different classes of stock, assess carrying capacity, assess potential productivity of farm or patch of land.
Limitations involved include assumptions that have been placed on variables including climate, topography, pasture quality and quantity, water availability.

28
Q

Describe why animal health and welfare is an important priority for sheep enterprises in Australia.

A

Animal health and welfare are important as they provide a benchmark for farmers and encourage them to produce the best quality product using the best welfare practices as per the 5 freedoms. Important for sheep as there are range of practices during production that can negatively impact welfare-marking, mulesing, etc.
Improper management can lead to poorer production, negatively affecting end product and damaging international trade.

29
Q

Describe the best practice procedures for marking in a spring lambing merino flock in southern NSW.

A

Marking done as early as possible to minimise pain to animal, ideally prior to weaning (approx 6wks old, NOVEMBER). Ear marking uses applicators in good working order, disinfect between animals, adequately restrained head with tag applied to centre of ear away from longitudinal ridges. Castration either surgically with sharp, sterilised lamb marking knife or via elastrator method. If older than 6months vet must be used.
Tail docking done using sterilised lamb marking knife, gas heater de-tailer, elastrator rings. Severance occurs level with tip of vuvla or below second palpable tail joint. If using knife, bare skin beneath tail should be pushed forward just prior to severance, leaving flap of skin to heal over bottom of cut tail.
Lambs should not be marked if showing signs of overheating or over excitement-excess bleeding. Should not be held in yards, ewes should have adequate water to reduce risk of deserting lambs upon release from yards. Ewes up to date with tetanus vaccine to ensure lambs have immunity.

30
Q

Describe recommendations you would provide to producer for weaning her lambs in a spring lambing prime flock near Wagga.

A

Don’t wean til youngest are at least 8wks and above 20kgs. Wean early December, post marking. Depending on state of pasture may need to supp feed with high protein ration (grains-oats, lupins, lamb pellets) to ensure weight gain continues. Ensure water and shade are easily accessible due to summer conditions. Frequently check health and welfare-particularly fly strike. Release onto low worm pasture.

31
Q

Describe the recommendations you would provide to a producer for weaning his lambs in a spring merino flock near Wagga.

A

Wean early December post clutching and mulesing at marking. Paddocks should be high quality feed, low grass seed infestation, low worm risk and good quality stock water. Away from ewes with good fences. No contact with other mobs on property.

32
Q

What are the main factors that influence lamb growth and discuss how they can be optimised.

A

Two main factors; birth weight and nutrition. Nutrition affected by level of ewe lactation, wether she has twins or single lamb, condition score of ewe at lambing, current nutritional status of ewe and her fat reserves.
Difficult to optimise birth weight due to uncontrollable factors, ensuring ewe is receiving 1.7X maintenance daily in last trimester increases likelihood of healthy lamb.
Nutrition optimised by ensuring ewe is receiving adequate energy for lactation. Producing 2-3kg milk requires 20-30MJME daily. Ensuring lamb is receiving milk is important, lambs require 1.5kg for maintenance, every kg afterwards sustains growth rate of approx. 330g per day, decreasing to 270g later in lactation.

33
Q

What are nutritional requirements for lactating ewes?

A

2-2.5X maintenance.

Maintenance is 8-10MJME

34
Q

Discuss how nutritional requirements for lactating ewes can be met and monitored in an Autumn lambing flock in northern Victoria.

A

Condition scoring is an important tool for monitoring ewe nutritional status and body reserves, if condition is dropping to low 3 or less supplementary feeding should commence to meet energy requirements for both ewe and lamb.
If adequate rain hasn’t fallen over Autumn the pasture quality is low and supp feeding and irrigation may also be necessary.
Feed intake peaks 8wks post lambing so ewes should be properly monitored over this phase.

35
Q

Discuss advantages and disadvantages of different lamb finishing systems.

A

Three forms; pasture, lambs finished on crop residue, lamb lot feeding. Pasture systems need to time with spring flush to ensure adequate feed for either the weaned or sucker lambs. Sucker lambs are low maintenance and rely on nutrition of the ewe and her milk production for growth while weaner lambs are sold as heavier carcass lambs and have higher management needs.
Lambs finished on crop residue is cheap alternative to feedlots, often lack in energy and protein and so require supp feeding. Lupin stubble is often used as higher energy and protein however risk of lupinosis.
Lamb lot feeding provides consistent supply of quality lamb all year to consumers. Not reliant on rainfall and pasture growth. Lot feeding utilises ‘feeder lambs’ from specialist producers only, labour intensive, higher disease risk due to high density of animals.

36
Q

Describe steps involved in clinical exam of sheep.

A

History-flock/mob, farm husbandry and practices.
Group/mob examination-from distance in paddock or large yard. Determine proportion of affected animals, severity of problem. Another opportunity to gain more history and asses farm practices.
Single out affected sheep after having observed them from distance. Assess body condition, use 5Ts as basic structure for close up exam.

37
Q

What are anthelmintics used for in sheep?

A

Anti parasitic drugs used to treat and control internal parasites such as worms and liver fluke. Administered in form of drenches.

38
Q

List common groups of anthelmintics available.

A

Broad spectrum/Major: benzimidazoles (white drenches), levamisole/morantel (clear drenches), macrocyclic lactones (MLs)/mectins.
Narrow spectrum/minor: organophosphates (naphthalophos), triclabendazole, salicylanilides (closantel, oxyclozanide).
Combination drenches - benzimidazole and levamisole, albendazole and closantel. Act on multiple parasites at different stages.

39
Q

Discuss important considerations when using anthelmintics and the reasons.

A

Dose appropriate to body weight, consistent under or over dosing leads to resistance.
Certain drenches can be lethal if overdosed-organophosphates.
Dose only when required-faecal egg count.

40
Q

What are vaccines used for in sheep?

A

Vaccination allows protection against some of the common and serious infectious diseases via the stimulation of antibodies against the particular disease. Allows protection against production loss.

41
Q

List some common types of vaccines used in sheep.

A

Clostridial-5 in 1 or 2 in 1. Cover against enterotoxaemia(pulpy kidney), tetanus, blacks disease, blackleg, malignant oedema.
Caseous lymphadenitis (CLA, cheesy gland)-in combination with clostridial vaccines, 6 in 1 or 3 in 1.
Scabigard, Gudair, anthrax.

42
Q

What are important considerations when using vaccines and why?

A

Herd immunity can be obtained by vaccinating 70-80% herd. Only administer to healthy animals, majority are SC and should be administered in areas with easily accessible skin where they won’t affect meat quality.
Care needs to be taken by administrator to not inject themselves.
Vaccines need to be stored in fridge and out of direct sunlight.
Administration at appropriate times important to ensure adequate immunity-annual boosters. WHP considered.

43
Q

Discuss important factors and reasons that need to be considered in the management of sheep lice infestation in a fine merino wool sheep flock.

A

Lice effect quality of wool and so need fast and effective treatment. Lice are obligate parasites so they spend entire life cycle on the sheep, treatment involves chemical such as organophosphates or insect growth regulators. Every sheep must be treated to ensure no reinfestaion. Shearing should be considered as remove 90% of lice which die in wool bale and chemicals applied to sheep post shearing kill rest. WHP need to be observed for wool.
No contact with other mobs, don’t introduce new animals without inspecting.
Check shearers aren’t infested from previous jobs (clothing and shoes).

44
Q

Discuss why anthelmintics resistance is a concern for sheep enterprises.

A

Increased resistance leads to decreased effectiveness of treatments and therefore loss in production for farmers.

45
Q

Discuss some strategies that reduce the risk of anthelmintics resistance developing quickly on property.

A

Dosing appropriate to body weight, dosing only when required.
Faecal egg counts.

46
Q

Describe the national livestock identification system for sheep in Australia and discuss why it is important.

A

Designed to identify and trace ruminants from the property they were born on through to slaughter. Put in place after mad cow disease outbreaks, mob based system for sheep underpinning bio security, food safety and market access. Allows for quick containment of major food safety or disease outbreaks if they occur.
System involves colour coded tags for year born with PIC and ID number. Allow for easy identification when recording movements on national vendor declarations (NVD) and transport stock statements (TSS). Both important traceability documents uploaded to NLIS database.

47
Q

What are the ‘tropical adaptations’ that Bos indicus cattle show over Bos Taurus animals?

A

Bos indicus cattle have numerous tropical adapations, some physical and some physiological. Physically they have a lot of loose skin around their neck, dewlap and sheath which increases surface area, allowing for better heat loss. They also have long pendulous ears which have the same effect of increasing surface area. They have a lower body mass ratio to bos Taurus, well developed sweat glands and more sebaceous glands, all increasing heat loss.

Physiologically they are more heat tolerant, facilitated by many of the physical factors and their body temperature doesn’t rise as high in hot environments due to better thermoregulation. They also exhibit tick resistance and subsequently tick fever resistance, preventing production loss within this area.

48
Q

Describe the advantages and disadvantages of keeping breeds with double muscling traits.

A

The advantages of double muscling are obviously related to increased muscle mass and therefore meat cuts due to increased number and size of muscle fibres. The carcasses are lean, low intramuscular fat and tenderness is not altered.

Issues associated with this condition include decreased fertility, increased cases of dystocia, caesarians are frequently required and lower calf viability. Decreased stress tolerance is also exhibited most probably due to increased energy required by the body to maintain homeostasis due to its size.

49
Q

Summarise the main difference between beef production systems in northern Australia when compared to southern Australia.

A

Northern beef production systems are 88% specialist beef producers with a farm size average of 22, 221 hectares. 33% of farms run over 800 head and 33.6% run under 200 head. In comparison to southern producers who are only 64% specialist beef producers, have an average farm size of 5, 486 hectares with 7.6% running over 800 head and 55.6% running under 200 head.

Farming systems in the north are largely extensive and low input with low stocking rates due to a shorter growing season and poorer soils. Pastures are mainly native grasses. Southern systems have higher stocking rates and farms are more intensive with a higher input, pastures are generally improved due to more fertile soils, there is a longer growing season and the market is more influenced by price fluctuations.

50
Q

Describe the stressors that can contribute to welfare issues for cattle in northern Australia, and identify one possible solution that can help alleviate some of those problems?

A

Stressors include environmental stressors such as ectoparasites, endoparasites, seasonal nutrition, high heat and humidity, parasite transmitted disease, natural disasters such as floods, droughts, and fires, and predation. Other stressors include human, animal interactions, surgical procedures, disease or injury, identification and transport.

The use of tropically adapted cattle such as bos indicus, reduce the effects of the environmental stressors such as high heat and humidity and parasite transmitted disease (tick fever).

51
Q

Describe the benefits of producing beef in temperate and/or high rainfall zones of southern Australia.

A

The benefits of this climate is high rainfall which allows for good quality native and improved pasture that is able to withstand year-round stocking. Year round stocking allows for sale at all times of year, allowing the farmer to take advantage of higher prices during the off season if desired.

High pasture availability also decreases the cost of supplementary feeding, as the pasture is able to provide the energy required and young cattle would be expected to grow faster compared to cattle on pasture in hotter, lower rainfall areas.

52
Q

Define a feedlot, and explain with reasons, why this can be beneficial to a beef production system.

A

A feedlot is a confined yard area with watering, feeding and shade facilities where cattle are completely hand or mechanically fed with the purpose of production.

Feedlots can be beneficial as the allow the market specifications to be met a lot easier than less controlled systems, they provide an higher quality and consistency of product due to regulated and controlled feeding. The cattle can be insulated from the effects of weather such as lack of feed due to drought, allows for finishing at desired times regardless of feed availability. They also reduce stocking pressure on farm, poorer conditioned animals can be sent to feedlots to increase condition.

53
Q

Describe the benefits of a tight calving pattern, explain why those benefits are beneficial to the producer.

A

A tighter calving pattern means there is a shorter calving period and subsequently, more uniformity among the calves/weaners as they are all of a closer age, had very similar times spent on milk and similar weaning weights. More uniformity among the cattle allows the producer to receive higher prices at sale due to the market demands of uniformity.

54
Q

If you were starting a new cattle-farming business around the SW slopes of NSW, which decision making factors would you need to consider when deciding on how to operate your cow/calf breeding enterprise?

A

The farm area and pasture type needs to be considered in order to determine stocking rate, bull to cow ratio and joining method and time, and grazing management options (rotational). A decision as to whether pastures should be improved or whether supplementary feeding will be practiced during lower pasture quality times needs to be considered.

Genetics of the cattle being run should also be carefully considered, fertility, growth rates and carcass traits should all be accounted for among other breed characteristics. Management decisions should also be addressed such as vaccinations; clostridial, and this area is within the anthrax belt so an anthrax vaccine program should be carefully considered to prevent product loss.

Calving time should be chosen to meet market demands and to allow greatest profitability (consider pasture availability and cattle prices). This will be affected by the product being sold; will weaners will be sold? Or carried on to feedlot weight? They could also be carried right through to finishing weights if sufficient space and feed is available. Upon sale, marketing methods and selling options are important; direct, in paddock, direct to feedlot, tender, saleyards, helmsman, and online are all options. Live export within this location would probably not be viable as there are no livestock ports nearby and the cost of transport would be very expensive.