ECAM Control Panel Flashcards

1
Q

If the UPPER DISPLAY knob is switched to OFF what will occur?

A

 The E/WD display would automatically transfer to the “lower” display.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

With the E/WD displayed on the “lower” screen, what steps should be taken to view SD information?

A

Press and hold the appropriate system button on the ECAM CONTROL panel. The information selected will be available for 30 seconds.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What does the ALL pushbutton do?

A

 Displays ALL the system pages successively in 1-second intervals when held down
 Release the pushbutton to maintain display of the selected page

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What does pressing the RCL pushbutton do?

A
  •  Allows the flight crew to review any warning or caution messages that the CLR pushbutton or flight phase inhibition may have suppressed
  •  If held longer than 3 seconds, the E/WD will show any caution messages suppressed by the EMER CANC pushbutton
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

If the STS pushbutton is pressed and the system has no STATUS messages, what will be displayed?

A

 “NORMAL” for 5 seconds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What occurs during the Before Takeoff Flow when the T.O. CONFIG pushbutton is pressed?

A

- The system simulates the application of takeoff power and checks certain systems for proper configuration
- A warning is displayed if a system is not configured properly
- “TO CONFIG NORMAL” is displayed in the TO MEMO section if the
configuration is correct

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Describe the FO Preliminary Cockpit Preparation actions on the ECAM control panel.

A
  •  Recall – check old warnings
  •  DOORS – check oxygen quantity
  •  HYD – check quantity
  •  ENG – check oil quantity
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Should the ECAM control panel fail, what functions are available as hard- wired buttons?

A

 CLR, RCL, STS, EMER CANC and ALL

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What does the EMER CANC accomplish?

A

- Cancels the audio for warning messages (without removing any ECAM message)
- Cancels the present caution for the rest of the flight
- Calls up the STATUS page, which displays “CANCELLED CAUTION” and the TITLE of the failure
- Inhibited message can be recalled by holding RCL for more than three
seconds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What is the purpose of having the EMER CANC pushbutton?

A

 Used to cancel spurious MASTER CAUTIONS

How well did you know this?
1
Not at all
2
3
4
5
Perfectly