COMNAVAIRFORINST 4790.2C Flashcards
Non-Destructive Inspection (NDI) technicians with proficiency lapses exceeding 12 consecutive months, but less than how many years, require refresher training that must be administered by a Fleet Readiness Center (FRC) or NDI specialist to reestablish certification? (Page 3-14)
3
Both Oolevel and I-level administration divisions shall keep a message history file by date time group (DTG) for a minimum or how many months? (Page 3-82)
6
What is a system for the recall and reporting of test equipment by means of automatic data processing techniques? (Page 3-64
MEASURE
Which system is a production control system used by the Fleet Readiness Center (FRC) to schedule, induct, and control D-level workload? (Page 3-65)
NDMS:
NAVAIR Depot Maintenance System
O-level Maintenance Material Control Officers (MMCOs) will conduct a monthly review of Subsystem Capability Impact Reporting (SCIR) data for trends in aircraft system/susbsystem readiness. Trending shall cover at least how many consecutive months? (Page 3-85)
12
Who manages the maintenance department and is responsible to the Commanding Officer (CO) for the accomplishment of the maintenance department’s mission? (Page 3-77)
Maintenance Officer (MO)
OOMA XRAY submissions can take up to how many days to be reflected upline into the Aircraft Inventory and Readiness Reporting System (AIRRS)? (Page 3-85)
7
Who is responsible for the external condition of aircraft with regard to cleanliness and the day-to-day detection and reporting of corrosion and the failure of protective coatings? (Page 3-91)
Line Division Officer
Newly Certified Non-Destructive Inspection (NDI) technicians shall require at least how many months of supervised work experience before assignment at an activity without any experienced NDI technicians? (Page 3-15)
3
What provides coordination of technical data distribution and field engineering assistance and instruction for the maintenance, repair, and operation of Support Equipment (SE)? (Page 3-24)
NATEC:
Naval Air Technical Data and Engineering Service Center
Which program is intended to ensure proper fleet introduction of new or modified Aviation Life Support Systems (ALSS)? (Page 3-40)
FAILSAFE:
Fleet Air Introduction Liaison Survival Aircrew Flight Equipment
Which type of defect does not materially reduce the use of the unit or part for its intended purpose? (Page 3-47)
Minor
How many sections are Individual Material Readiness Llists (IMRLs) presented in? (Page 3-25)
5
employment data, change list, index, main body, and the activity inventory record
Which program is the removal of installed equipment from a stricken or damaged aircraft or engine prior to disposal? (Page 3-47)
RILOP
Reclamation in lieu of Procurement
Which type of resin is the standart paint system for all naval aircraft and Support Equipment (SE)? (Page 3-58)
Aliphatic polyurethane
What is the Navy’s major logistics information system used in support of the COMNAVAIRSYSCOM Life Cycle Logistics System? (Page 3-65)
NALDA
Naval Aviation Logistics Data Analysis
Which type of defect materially reduces the use of the unit or part for its intended purpose? (Page 3-47)
Major
Task-specific training shall be provided in an amount that will vary with complexity of the Technical Directive (TD) or maintenance technical manuals directed Non-Destructive Inspection (NDI) tasks, but shall not be less than how many hours for the first aeronautical part, assembly, or structural feature listed? (Page 3-13)
4
Lean, six sigma, along with what else comprise the primary AIRSpeed Continuous Process Improvement (CPI) methods? (Page 3-55)
TOC
theroy of constraints
Which system is an automated management information system which provides for standardized local management of Individual Material Readiness List (IMRL) assets? (Page 3-64)
LAMS
Local Asset Management System
Which level of repair is the repair of a damaged or non-operating gas turbine engine, its accessories, or components to an acceptable operating condition when the repair includes compressor rotor replacement or disassembly to the extent the compressor rotor could be removed? (Page 3-35)
First-degree
Which program is the restoration or replacement of primary aircraft structures that have reached fatigue life limits? (Page 3-47)
SLEP
Service Life Extension Program
Certified welders shall complete the minimum required OJT per which reference prior to being allowed to weld on aeronautical components? (Page 3-51)
NAVAIR 01-1A-34
What was designed to provide scheduled control of the predictable maintenance workload, for example, inspections, transfer or receipt of aircraft, and complaince with TDs? (Page 3-71)
MMP
Monthly Maintenance Plan