CHAPTER 4 - BUILDING CONSTRUCTION Flashcards

1
Q

I wouldn’t structural panel formed by gluing and compressing wood strands together under pressure. This material has replace plywood and planking and the majority of construction applications.

A

Oriented strand board

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Bricks, blocks, stones, and unreinforced and reinforced concrete products.

A

Masonry

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Walls with a surface layer of attractive material laid over a base of common material.

A

Veneer walls

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Expansion of excess moisture with and masonry materials due to exposure to this sheet of a fire, resulting in Temple forces within the material, and causing it to break apart.

A

Spalling

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Structural support made from a long steel bar that is bent at a 90° angle with flat or angular pieces welded to the top and bottom.

A

Lightweight steel truss

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

A non-loadbearing wall, often of glass and steel, fixed to the outside of the building and serving especially as cladding.

A

Curtainwall

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Short for reinforcing the bar. Steel bars placed in concrete forms for the cement is poured. adds considerable strength.

A

Rebar

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Type of building construction that uses renewable, environmentally friendly or recycled materials. Also known as natural or green construction.

A

Hybrid construction

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Steel structural members that are covered with either spray on fireproofing or fully encased in underwriters limited tested in improved system

A

Protected steel

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Rating assigned to a material or assembly after standardized testing by an independent testing organization. Identifies the amount of time and material or assembly will resist a typical fire, as measured on a standard time temp curve.

A

Fire resistance rating

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Solid materials, such as wood blocks, used to prevent or limit the vertical and horizontal spread of fire and the products of combustion in the hollow walls or floors, above false ceilings, in penetrations for plumbing or electrical installations, in penetrations of a fire rated assembly, or cockloft and crawlspaces

A

Fire stop

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Walls of the building by design carry at least some part of the structural load of the building in the direction of the ground base.

A

Loadbearing wall

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

And upright post in the framework of a wall for supporting sheets of laugh and plaster, wallboard, or similar material.

A

Stud

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Walls, usually interior, that support only its own weight.

A

Non-loadbearing wall

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Interior nonload bearing wall that separates the space into rooms.

A

Partition wall

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Fire rated wall with a specific degree of fire resistance, built of fire resistant materials and usually extending from the foundation up to and through the roof of a building, that is designed to limit the spread of the fire with in the structure or between adjacent structures.

A

Fire wall

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

A loadbearing wall shared by two adjacent structures

A

Party wall

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

Portion of the exterior walls of the building that extends above the roof. A low wall at the edge of the roof.

A

Parapet

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

The horizontal line at the junction of the top edges of two sloping roof surface

A

Ridge

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

The edge of a pitched roof that overhangs an outside wall.

A

Eave

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

Inclined beam that supports A roof, runs parallel to the slope of the roof, and to which the roof decking is attached

A

Rafter

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

Metal or wooden plates used to connect and strengthen the joints of two or more separate components into a load bearing unit

A

Gusset plates

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

Horizontal structure remember I used to support a ceiling or floor. Drywall materials are nailed or screwed to the ceiling. And the subfloor is nailed or screwed to the floor

A

Joists

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

Structural supports constructed of 2 x 3” or 2 x 4” members that are connected by gusset plates

A

Light weight wood truss

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

A trust constructed with the top and bottom chords parallel. These dresses are used as floor joists in multi story buildings and as ceiling joists and buildings with flat roofs.

A

Parallel cord truss

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

Horizontal member between trusses that support the roof

A

Purlin

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

Concealed space between the top floor and the roof of the structure

A

Cock loft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

Weight of the structure, structural members, building components, and any other features permanently attached to the building that are constant and immobile

A

Dead load

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

A second roof constructed over an existing roof

A

Rain roof

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

Items within a building that are movable but are not included as a permanent part of the structure; merchandise, stock, furnishings, occupants, firefighters, watering used for fire suppression are examples of this. Force placed upon a structure by the addition of people, objects, or whether

A

Live load

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

Continuous an unobstructed way of exit travel from any point in a building or structure to a public way, consisting of three separate and distinct parts: exit access, exit, and exit discharge.

A

Means of egress

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

Masonry is the most common building material in North America. True or false?

A

False – wood is most common

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

The effect of heat on the metal will depend on the type of metal and if it is exposed or covered. True or false?

A

True

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

Wrought iron is the primary material used in the construction of large modern buildings. True or false?

A

False – steel is the primary material

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

Manufactured structures are required to conform to model building codes. True or false?

A

False – manufactured homes are not required to conform to the model building codes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

Wall rated assemblies may be continuous from one floor to the bottom of the next floor. True or false?

A

True

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

There is always an external sign, like a soft roof, before roof collapse. True or false?

A

False – OSB and plywood sheathing could fail without warning

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
38
Q

Roof penetrations and openings can allow firefighters to gain access to attics. True or false?

A

True

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
39
Q

When off, solar panels retain no electricity. True or false?

A

False – even if power is off they retain/produce power

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
40
Q

Rain roofs may hide heating, ventilation, and air-conditioning units that contribute to collapse potential. True or false?

A

True.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
41
Q

Roof mounted equipment is never hidden from plain sight. True or false?

A

False – they may be under rain roofs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
42
Q

Smoke proof stair enclosures are required in all buildings. True or false?

A

False – they are only required in certain circumstances

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
43
Q

Fire doors must pass a test by a third-party testing agency. True or false?

A

True

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
44
Q

Windows security may prevent the escape of trapped victims and firefighters in emergency situations. True or false?

A

True

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
45
Q

What are the seven types of roofs?

A

Mansard. Gambrel. Hip. Sawtooth. Shed. Lantern. Butterfly.

46
Q

Name the different types of stairs.

A

Straight run. Return. Scissor. Circular. Folding. Spiral.

47
Q

Material known as drywall or sheet rock this material absorbs heat as moisture evaporates.

A

Gypsum

48
Q

Building material that includes bricks, stones, and concrete blocks; this material is minimally affected by fire exposure to high temperatures.

A

Masonry

49
Q

When melted this material can contribute to fire load; this material is used on structure exteriors, for water and sewer pipes, as well as for decorative use.

A

Plastic

50
Q

Building material that is internally fortified by steel reinforcement bars or wiremesh; this material performs well under fire conditions but can lose strength through spalling.

A

Reinforced concrete

51
Q

Material that is not typically used for structural support; this material can be found in sheet, block, and wire reinforced forms.

A

Glass

52
Q

Material that is manufactured by combining two or more distinctly different materials; this material is lightweight, has structural strength and resistance to chemical wear.

A

Composite materials

53
Q

The most common building material used in North America; this is the main component in a variety of structural assemblies.

A

Wood

54
Q

A process, not a single material; this material is difficult to penetrate with axes and can conceal fire in the cavity between spaces

A

Lath and plaster

55
Q

Building material that is used to provide structural support, decorative coverings, and window frames; the effective he will depend on if this material is exposed or covered.

A

Metal.

56
Q

Component that defines the perimeter of the building and divides it into compartments or rooms.

A

Walls

57
Q

Component that can vary widely in operation, style, design, and construction. Classified by the way it operates; includes sliding, folding, vertical, and revolving.

A

Doors

58
Q

Component that forms the top and bottom of the compartment; it’s construction varies depending on level

A

Floors/ceilings

59
Q

Component in which construction varies; the Two main categories are fixed and movable.

A

Windows

60
Q

Component that provides access to or egress from different levels of the structure.

A

Stairs

61
Q

Component designed to support the weight of the building and all its contents.

A

Foundations

62
Q

Component that functions to protect its structure and its contents from the effects of weather.

A

Roofs

63
Q

Obstruction that is found in cold and snowy Clymans to prevent ice damning and icicle formation at the eaves; designed to prevent interior heat from escaping into attic space.

A

Cold roofs

64
Q

Obstruction I can create a void which conceals the fire and allows it to burn undetected; may also hide HVAC units, adding to collapse potential.

A

Rain roofs

65
Q

Obstruction that adds a live load to the dead load distributed on a roof; it increases collapse potential and may affect ventilation.

A

Roof mounted equipment

66
Q

Stretching that represents a significant hazard; Hazards include tripping over panels in the amount of electricity contained by panels even went off

A

Photovoltaic roofs

67
Q

Obstruction that can take several forms raging from a few potted plants and flowers boxes to a layer of earth with growing plants covering a large area of the roof.

A

Green roofs

68
Q

Obstruction put into place to prevent illegal entry; maybe modified by building occupants.

A

Security

69
Q

Window that has one or more top hinge, I would swinging sashes that are operated by unlatching and pushing or by using a mechanical window crank

A

Awning

70
Q

Window that has a side hinged sash that is usually installed to swing outward.

A

Casement

71
Q

Window that swings outward at the top or bottom and slides upward or downward in grooves.

A

Projecting

72
Q

Window that has two or more sashes at least one of which moves horizontally within the frame.

A

Horizontal sliding

73
Q

Window that has a sash that pivots horizontally or vertically about a central access.

A

Pivoting

74
Q

A window that has two sashes that move past each other on the vertical plane

A

Double hung

75
Q

Window that has only one sash openable

A

Single Hung

76
Q

Window that has a large number of Nero overlapping glass sections that swing outward.

A

Jalousie

77
Q

What type of masonry really shows any sign of serious deterioration?

A

Bricks

78
Q

Building material is not typically used for structural support?

A

Glass/fiberglass

79
Q

Finger jointed timber, laminated timber, and medium density fiber board are all examples of what type of building material?

A

Composite materials

80
Q

What type of wall may be used as party walls two separate two adjacent structures to prevent firespread?

A

Firewall

81
Q

What part of the roof can act as a support and may be the same as a roof covering?

A

Deck

82
Q

What door type has the advantage of illuminating door swing that might interfere with the use of interior space?

A

Sliding doors

83
Q

What type of door is constructed with spacers between these panels to provide lateral support?

A

Hollow core doors

84
Q

What type of door has the disadvantage of requiring clear space around the door to ensure closure?

A

Swinging fire doors

85
Q

What are the main types of occupancy classification

A

Single use and separated use

86
Q

Structural failure of a building or any portion of it resulting from a fire, snow, wind, water, or damage from other forces

A

Structural collapse

87
Q

Construction method using long continuous studs that run from the sill plate to the roof eave line

A

Balloon frame construction

88
Q

Construction method in which a floor assembly creates an individual platform that rests on the foundation

A

Platform Frame construction

89
Q

Arrangement of materials in a building does not directly affect fire development. True or false?

A

False - it directly affects development severity

90
Q

The most effective defense against heavy content loading is proper inspection and code enforcement. True or false?

A

True

91
Q

Furnishings and finishes do not contribute to fire spread and smoke production. True or false?

A

False - they do

92
Q

Unprotected steel and wooden trusses can fail from exposure to heat alone. True or false?

A

True

93
Q

Collapse potential is only a concern during the emergency phase of an incident. True or false?

A

False - they may occurred prior to and without warning

94
Q

The safest place for personnel in defensive operations is the corner of the building. True or false?

A

True

95
Q

Size up : is it flat, pitched, or arched; what type of covering is visible?

A

Roof type

96
Q

Size up : can these be opened from inside; are there grilles that should be removed from outside?

A

Windows

97
Q

Size up : how many, above and below ground, are visible; are there any below ground on one side of the building that are above ground on the other?

A

Number of stories

98
Q

Size up : have additions been made that may create internal hazards?

A

Renovations and modifications

99
Q

Size up : are there obvious signs of deterioration?

A

Age of building

100
Q

Size up : are there HVAC units, water tanks, or other heavy objects visible?

A

Dead loads

101
Q

Size up : is it wood-frame, unreinforced masonry, all-metal, or concrete?

A

Construction materials

102
Q

The collapse zone for this type of construction should be established if a fire is intense or if the structure has been weekend over time by repeated fires.

A

Type IV

103
Q

When debris from this construction type strikes the ground, it can travel or even cause the collapse of other structures.

A

Type III

104
Q

The primary concern is flying glass; zones must consider direction and velocity that wind currents may carry.

A

Type I

105
Q

It is rare for this type of structure to collapse outward, the greater danger is interior collapse.

A

Type V

106
Q

Structures of this type will expand and twist, pushing out walls when exposed to temperatures above 1000 degrees F

A

Type II

107
Q

Even when treated with fire retardant, ______ can contribute to fire spread.

A

Wood shakes

108
Q

Estimate the collapse zone by taking the heights of the structure and:

A

Multiply by a factor of 1.5

109
Q

What part of type III construction carries the exterior load?

A

Concrete, Brick, or masonry

110
Q

Establishing a collapse zone is done during what type of strategy?

A

Defensive

111
Q

Wood with high moisture content.

A

Greenwood