Inspect Turbine Engine Fuel Systems Flashcards

1
Q

What is meant by a compensated fuel pump?

A

It is a fuel pump that senses the ambient air pressure and maintains the fuel pressure a specific amount above this air pressure

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What would likely cause a reciprocating engine equipped with a float carburetor to hesitate momentarily when the throttle is rapidly advanced from idle to full power?

A

A malfunctioning accelerator pump

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Why do aircraft fuel metering systems for reciprocating engines have mixture controls?

A

The air density decreases as the aircraft ascends, causing the mixture to become richer. The mixture control allows the fuel to be decreased to maintain a fuel-air mixture ratio that produces the desired power

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What are the two types of fuel injection systems used on modern reciprocating aircraft engines?

A

Teledyne Continental (TCM) system and Precision Airmotive (Bendix) system

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What is used in the TCM fuel injection system to control the amount of fuel sent to the nozzles?

A

The engine speed determines the injector pump output pressure. The relief valve determines the fuel for low-speed operation, and the adjustable orifice determines the fuel for high-speed operation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What is used in the Precision Airmotive system to control the amount of fuel sent to the nozzles?

A

The mass of the air entering the engine acts on an air diaphragm that controls a servo ball valve in the line between the regulator and the flow divider

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Where are the fuel strainers normally located in an aircraft fuel system?

A

Finger strainers are located in the tank outlet the main strainer located at the lowest point in the fuel system and strainers in the carburetor or fuel injection system

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What are two types of fuel heaters used in a jet transport aircraft?

A

Air to fuel and oil to fuel

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What kind of fuel boost pumps are normally installed inside the fuel tanks?

A

Centrifugal pumps

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What two things are adjusted when setting the idling conditions on a float carburetor?

A

A. Idling RPM by adjusting the throttle stop

B. Idling mixture by adjusting idle needle valve

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What are three functions of the boost pump in the tank of a jet transport aircraft?

A

A. To pressurize the fuel in the line between the tank and the engine driven pump
B. To transfer fuel from one tank to another to balance the fuel load
C. To pump fuel from the tank into the dump chute when fuel is being dumped

How well did you know this?
1
Not at all
2
3
4
5
Perfectly