Major Safety Violations

Question 1

Definition

Answer 1

An unsafe act that could cause the loss of life, limb or eyesight to any individual during range training and the FTX.

Question 2

A. Failure to ____ ____ ____ ____ ____ and/or demolitions.

Answer 2

Maintain control of blasting caps

Question 3

B. Failure to ____ ____ ____ while working with an initiating set or down range.

Answer 3

Wear eye protection

Question 4

C. Handling ____ ____ after an initiating set has been tied in to line/ring main.

Answer 4

Primed demolitions

Question 5

D. Stepping/crossing ____ ____ ____ ____ ____ an initiating set has been tied in to line/ring main.

Answer 5

Over a firing system after

Question 6

E. Crossing ___/____ over a burning non electric initiating set.

Answer 6

MDI/Shock-tube

Question 7

F. Initiating ____ ____ ____ ____ to being instructed by cadre to do so.

Answer 7

A firing system prior

Question 8

G. Cutting a cap with ____ ____ ____ ____ or any other device.

Answer 8

An M2 crimping tool

Question 9

H. Crimping ____ ____ ____ with anything other than an M2 crimping tool.

Answer 9

A blasting cap

Question 10

I. Cutting det cord with anything other than a pair of ____ ____; cutting explosives on a sparking surface ie.. concrete or metal.

Answer 10

M2 crimpers.

Question 11

J. Forcing a blasting cap into an ____ ____ ____.

Answer 11

Unprepared priming hole.

Question 12

K. Prepping ____ ____ ____ with anything other than ____ ____.

Answer 12

A priming hole

M2 crimpers

Question 13

L. Prepping an initiating set while ____ ____ ____ ____ ____/____ ____.

Answer 13

Personnel are still on target/down range

Question 14

M. Failure to ____ ____ while conducting ____ ____ ____ operations.

Answer 14

Shunt wires

Electrical firing system

Question 15

N. ____ ____ ____ yourself while ____ ____ ____ ____ ____.

Answer 15

Failure to ground

Working with electric blasting caps

Question 16

O. Failure to properly ____ ____ ____ ____.

Answer 16

Test electric blasting caps

Question 17

P. Failure to use a ____ ____ ____ (with no demolitions inside) to cover electric blasting caps while performing continuity checks and/or arming.

Answer 17

Sandbag or rucksack

Question 18

Q. Failure to keep ____ ____ switch in the “hole-off” position after programming.

Answer 18

RAMS “F”

Question 19

R. Picking up or kicking unknown items (____, ____, ____.)

Answer 19

UXO, shrapnel, etc.

Question 20

S. Having a ____ ____ with a weapons system.

Answer 20

Negligent discharge

Question 21

T. Throwing/slamming ____, ____, ____ ____ ____ ____.

Answer 21

Rucksacks, boxes, or bags containing demolitions.

Question 22

U. Failure to separate ____ ____ ____ ____.

Answer 22

Demolitions from initiation sets.

Question 23

V. Committing ____ during the FTX.

Answer 23

Fratricide