IEQ 1-4 Flashcards

1
Q

What does the “E” stand for in IEQ?

A

Environmental

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Name 2 prerequisites in the IEQ Section

A
  1. Minimum Indoor Air Quality Performance 2. Environmental Tobacco Smoke Control
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What is the intent of Indoor Environmental Quality prerequisite 1?

A

To prevent the development of indoor air quality problems and contribute to the well- being and comfort of its occupants.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What standard sets the minimum for minimum IAQ performance?

A

ASHRAE 62-1999 (and approved addenda ASHRAE 62-2001, Appendix H).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What are the design strategies to address minimum IAQ performance?

A

Identify potential IAQ problems on the site and locate air intakes away from contaminate sources.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What does ETS mean?

A

Environmental Tobacco Smoke

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What are 2 potential ETS requirements?

A
  1. Prohibit smoking in building and near entry 2. Designated smoking room that effectively removes ETS from the building
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What is IEQ Credit 1 called?

A

Carbon Dioxide Monitoring

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What is the intent of the Carbon Dioxide Monitoring Credit?

A

Provide capacity for IAQ monitoring to sustain comfort and well being.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

How many points are available for Carbon Dioxide Monitoring?

A

One

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What ASHRAE standard discusses CO2 and metabolic rates?

A

ASHRAE 62-2001, Appendix D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What is the strategy for CO2 monitoring?

A

CO2 monitoring sensors in HVAC, integrated with the building automation system (BAS)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What is IEQ Credit 2 called?

A

Ventilation Effectiveness

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What is the intent of Ventilation Effectiveness Credit?

A

Provide fresh air.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

How many points are available for Increase Ventilation Effectiveness?

A

One

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What does the E stand for in (Eac) ventilation systems?

A

Air change Effectiveness

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

In Ventilation Effectiveness, what value should E be in mechanically ventilated spaces?

A

Greater or equal to 0.9.

18
Q

In naturally ventilated spaces, what must be summarized in a table?

A

Provides effective ventilation for 90% of each zone for at least 95% of hours of occupancy.

19
Q

What standard sets the E for mechanically ventilated buildings?

A

ASHRAE 129-1997

20
Q

How do you design an envelope system to optimize E?

A

Displacement ventilation, low velocity ventilation, plug flow ventilation, and operable windows.

21
Q

What is IEQ Credit 3 called?

A

Construction IAQ Management Plan

22
Q

What is the intent of Construction IAQ Management Plan Credit?

A

Prevent indoor air quality problems resulting from the construction/renovation process.

23
Q

How many points are available for Construction IAQ Management Plan?

A

Two

24
Q

During construction, the IAQ Management Plan requires following what standards?

A

SMACNA IAQ Guideline for Occupied Buildings Under Construction, 1995, Chapter 3.

25
Q

What are the requirements under Construction IAQ Management Plan?

A
  1. Compliance with SMACNA 2. Protection of absorptive material from moisture damage and 3. Replace filtration before occupancy
26
Q

What Minimum Efficiency Reporting Value (MERV) standard must filtration media adhere to?

A

13, as determined by ASHRAE 55.2-1999

27
Q

How long is the flush-out period in Credit EQ3.2

A

2 weeks (minimum).

28
Q

What are the 2 options to achieve Construction IAQ Management Plan Credit 3.2?

A

Flush-out with 100% outside air for 2 weeks or conduct a baseline IAQ test.

29
Q

What standard applies for a for the baseline IAQ test?

A

EPA Protocol for Environmental Requirements, for the Research Triangle Park Campus, Section 01445.

30
Q

What is the strategy for a Construction IAQ Management Plan?

A

Protect HVAC during construction, control pollutant sources, interrupt pathways for contamination; sequence material installation; 2 week flush-out or test the contaminant levels.

31
Q

What is IEQ Credit 4 called?

A

Low-Emitting Materials

32
Q

How many points are available for Low- Emitting Materials?

A

Four

33
Q

What is the intent of Low-Emitting Materials Credit?

A

Reduce the quantity of indoor air contaminants that are odorous or potentially irritating.

34
Q

What material does IEQ Credit 4.1 cover?

A

Adhesives & sealants

35
Q

What is the standard for IEQ 4.1?

A

Adhesives: South Coast Air quality Management District Rule #1168; Sealants: Bay Area Air Quality Management District Reg 8, Rule 51

36
Q

What material does IEQ Credit 4.2 cover?

A

Paints & coatings

37
Q

What is the standard for IEQ 4.2?

A

Green Seal’s Standard GS-11

38
Q

What material does IEQ Credit 4.3 cover?

A

Carpet systems

39
Q

What is the standard for IEQ 4.3?

A

Carpet & Rug Institute Green Label IAQ Test Program

40
Q

What material does IEQ Credit 4.4 cover?

A

Composite wood & agrifiber products

41
Q

What is the standard for IEQ 4.4?

A

Products must contain no added urea- formaldehyde resins.

42
Q

What are the strategies to meet IEQ Credit 4?

A

Specify low-VOC materials in construction documents. Ensure that VOC limits are clearly stated in each section where adhesives, sealants, paints, coatings, carpet, and composite wood systems are addressed.