AFTER START

Question 1

AFTER START - CAPTAIN

Answer 1

AVIONICS MASTER - ON

FUEL PANEL CBs - CHECK

EGPWS - TEST
- GPWS Lights Illuminated
- Audio Warnings Check

EFIS AUX POWER - ON
- Auto Fx Arm
- Ice Protection - As required

ELEVATOR TRIM - SET FOR TAKE-OFF

PROPELLERS - Confirm Taxi
FLAPS - Set 17°
BOTH EFIS DSPs - Set for Departure
ACTIVE & PRESELECT COURSES - Set
ONSIDE DATA - Set
HDG BUGS - Rwy Hdg
HSI POINTERS - Set as Req.
RADIO ALTEMETERS - Zero

RADAR - Test / Standby
PASSENGER BRIEFING - Send
CVR - Check Needle in Green Band
FDR - Warning Light Extinguished

Wait for Co-Pilot to select the Flight Director to G/A

Question 2

AFTER START - FIRST OFFICER

Answer 2

4 EFIS POWER SWITCHES - On
PRESSURIZATION - Set
STANDBY HORIZON POWER - On
VACUUM/PNEUMATIC PRESSURE - Check
BLOWERS - HI/LO
MODE CONTROL - Off

PNEUMATICS & SUCTION - Test
(Only first flight of the day)

CB’s - Check
AVIONICS PANEL - Set
COMM FREQ. AS BRIEFED - Set
NAV FREQ. AS BRIEFED - Set
STANDBY HORIZON - Uncaged
ALT PRESELECT - Set
ADF - Set
TRANSPONDER - Set
TCAS - Test
GPS - Set

GO AROUND MODE - Select

Wait for Captain

Question 3

PNEUMATICS & SUCTION TEST - FIRST OFFICER

Answer 3

PNEUMATICS & SUCTION - Test
(Only first flight of the day)

• LEFT BLEED AIR SWITCH - ENVIR Off
  » Check Left ENVR Off Annunciator Illuminated
• LEFT BLEED AIR SWITCH - INST+ENVR OFF
  » Check Suction in Wide Green Arc & Pneumatics - Press 17.5-19.0Psi
• RIGHT BLEED AIR SWITCH - ENVIR Off
  » Check Right ENVR Off Annunciator Illuminated
• RIGHT BLEED AIR SWITCH - INST+ENVR OFF
  » Suction & Pneumatics - Zero
  » L&R “Bleed Air Fail” Annunciator Illuminated
• LEFT BLEED AIR SWITCH - Open
  » Check Suction in Wide Green Arc & Pneumatics - Press 17.5-19.0Psi
• RIGHT BLEED AIR SWITCH - Open

Question 4

AFTER FLIGHT DIRECTOR WAS SET FOR GO AROUND - CAPTAIN

Answer 4

ELECTRIC TRIM - Check and Set
- Elevator Trim Switch - On
- Pilot & Co-Pilot Trim Switches - Check
- Pilot’s Trim will override Co-Pilot’s Trim
- Movement of only half of switch will not activate trim

TRIM DISCONNECT SWITCH - Press to 2nd Level & Release
- Pitch Trim Off Annunciator Illuminates
- Electric Pitch Trim - Deactivated
- Elevator Trim Switch - Off, then On
- Pitch Trim Off Annunciator - Off

ELEVATOR TRIMS - Set for Take-Off

PERFORM PANEL SCAN
- Read out Instrument indications

REQUEST AFTER START CHECKLIST

Question 5

AFTER FLIGHT DIRECTOR WAS SET FOR GO AROUND - FIRST OFFICER

Answer 5

WAIT FOR CAPTAIN

ELCTRIC TRIMS - Check
» Move Trim Switches as Directed by Captain

PANEL SCAN
» Follow the Captain through on Instrument Indications.
» Call out any Deviations

COMPLETE AFTER START CHECKLIST AND CALL
» After Start Checklist Complete