AIR COND Panel Flashcards

1
Q

If PACK FLOW is selected to LO, NORM or HIGH and only the APU is providing BLEED AIR or one pack is selected OFF, what will the packs provide?

A

HIGH flow rate, since the flow rate function is automatic.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

If the HOT AIR valve faults, what will happen to the temperature control system?

A

All trim air valves close and PACK 1 controls the cockpit temperature to the last selected value. PACK 2 controls the cabin to the averages selected by the FWD and AFT CABIN temperature selector knobs.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

How are the PACKS controlled and operated?

A

Electrically controlled and pneumatically operated.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What are some potential causes for a PACK FAULT light?

A
  • Valve position disagrees with selected
  • Compressor outlet overheat
  • Pack outlet overheat
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What are some potential causes for ENG BLEED FAULT light?

A
  • Bleed overpressure
  • Bleed overheat
  • Wing or engine leak on the related side
  • Bleed valve NOT closed during engine start
  • Bleed valve NOT closed with the APU BLEED ON
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What is the logic for the X-BLEED rotary selector?

A

• SHUT = the valve is closed.
• AUTO = open if the APU bleed valve is open; closed if APU bleed valve is
closed or there is a wing, pylon or APU leak (except during an engine start). • OPEN = the valve is open.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What does APU BLEED FAULT illumination indicate?

A

APU bleed leak.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What does selecting the RAM AIR pushbutton accomplish?

A

Ram air inlet opens if the differential pressure is less than 1 PSI.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What is the RAM AIR pushbutton used for?

A
  • Smoke removal in cabin

* Ventilation of cabin with a dual pack failure

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

How is the Bleed leak detection different on CEO and NEO aircraft?

A

If a Bleed Air Monitoring Computer (BMC) fails on NEO airplane, over temperature protection is lost on the affected side. Has no effect on CEO

How well did you know this?
1
Not at all
2
3
4
5
Perfectly