Article 5 forcible entry

Question 1

How wide is the Adz

Answer 1

2 inch

Question 2

Call for Axe FF to pump the Rabbit Tool until the door opens or the tool runs out of throw

Answer 2

send it

Question 3

This is the process of checking behind the door and sweeping for victims, assessing fire behavior (smoke pressure) and lastly identifying the layout of the interior construction. This should be done every time that you force a door.

Answer 3

Life-Fire-Layout

Question 4

Using the Adz’s width to gap by leveraging the Halligan shaft up or down opposite the Pike.

Answer 4

power move

Question 5

Driving the Halligan into the gap until the “Crotch” of the Forks are even with the inside edge of the door stop. With relation to the Adz, this involved driving the Adz at least 1 ¾” into the gap ensuring that you have cleared the door.

Answer 5

Setting the tool

Question 6

How far above locking mechanism do you place forks?

Answer 6

six inches

Question 7

What is proper depth to set Adz?

Answer 7

3 1/4inches