Auto Quizzes

Question 1

An entry-level technician is one who is certified and has experience with most of the systems on the vehicle (T/F)

Answer 1

False

Question 2

Some states require auto technicians to be ASE certified to perform repairs (T/F)

Answer 2

True

Question 3

Most post-secondary schools are two year programs (T/F)

Answer 3

True

Question 4

Most vehicles in the late 1800s and early 1900s were powered by gasoline (T/F)

Answer 4

False

Question 5

Technical schools often have shorter completion times than a community college

Answer 5

True

Question 6

Typically, whose job is it to complete the service order?

Answer 6

Service advisor

Question 7

To be successful, a parts counter person must possess all the following skills EXCEPT:

Answer 7

Transmission repair skills

Question 8

What ability must a current automotive technician have to be successful?

Answer 8

a sound understanding of automotive technology, on-the-job experience, continuous training in new technology (all answers are correct)

Question 9

Which type of technician must pass the eight ASE automotive certification tests A1 through A8?

Answer 9

Master automotive technician

Question 10

How many years are ASE student certification tests valid?

Answer 10

Two

Question 11

Besides automotive technicians, which of the following jobs require(s) a good working knowledge of all automotive systems and all major components?

Answer 11

Parts specialist, service advisor, service manager.
(all answers are correct)

Question 12

What describes the requirement for individuals to learn and acquire new skills as the automotive industry changes?

Answer 12

Lifelong learning

Question 13

What technician typically repairs a vehicle after it has suffered some type of body or structural damage?

Answer 13

Collision

Question 14

The organization that was formed to certify technicians is:

Answer 14

ASE

Question 15

Which of the following tasks is typically performed by an express technician?

Answer 15

Oil and filter change

Question 16

Which tasks are primarily expected of a line technician?

Answer 16

Warranty repair, basic brake repair, assist in training new employees
(all answers are correct)

Question 17

Which of the following tasks is NOT expected of any entry level technician?

Answer 17

Diagnose trouble codes

Question 18

Which skill is necessary for individuals working in Customer Service industries?

Answer 18

Interpersonal

Question 19

Which privately owned and operated schools offer diploma and degree programs?

Answer 19

Technical schools

Question 20

Current accessories such as power windows, power door locks, and rear window defoggers are standard equipment on today’s vehicles due to?

Answer 20

The electronic revolution

Question 21

Nitrile gloves are allergy safe but weaker than latex gloves. (T/F)

Answer 21

False

Question 22

Nitrile gloves protect your skin when working with fuels, solvents, and other chemicals. (T/F)

Answer 22

True

Question 23

Safety data sheets (SDS) should be kept in a locked cabinet in the service manager’s or supervisor’s office. (T/F)

Answer 23

False

Question 24

Lifts are either pneumatic-hydraulic or electric-hydraulic. (T/F)

Answer 24

True

Question 25

Nearly every liquid, chemical, and solvent used by the vehicle and for service and repair are considered hazardous waste. (T/F)

Answer 25

True

Question 26

Safety glasses, safety goggles, or a face shield are required when workers are exposed to which of the following?

Answer 26

Flying particles, molten metal, liquid chemicals. (all answers are correct)

Question 27

______ substances can, when allowed to mix or come into contact with other substances, create harmful gases or start a fire

Answer 27

Reactive

Question 28

According to government data, how many workers in the United States sustain an eye injury that requires medical treatment?

Answer 28

2,000

Question 29

A class A fire extinguisher can put out which type of fires?

Answer 29

Plastic

Question 30

What type of gloves protect your skin from fuels and solvents?

Answer 30

Nitrile

Question 31

Which of the following is NOT an acceptable form of foot protection

Answer 31

Steel-toed sneakers

Question 32

What is the most serious type of burn?

Answer 32

Third-degree

Question 33

A chemical liquid has gotten into your eye. You should flush it with water at the eyewash station for at least:

Answer 33

15 minutes

Question 34

A safety data sheet (SDS) contains all of the following EXCEPT:

Answer 34

Emergency contact information

Question 35

What color is used to indicate high-voltage wires on a hybrid vehicle?

Answer 35

Orange

Question 36

To avoid carbon monoxide fumes, a (an) __________ __________ __________ system is commonly used.

Answer 36

Exhaust gas ventilation

Question 37

Before moving a vehicle, you should check the brake pedal _________ and ___________.

Answer 37

Feel and travel

Question 38

Used oil and antifreeze are considered _______________ _____________.

Answer 38

Hazardous waste

Question 39

_______________ is (are) used by technicians to move around under a vehicle that is only raised off the floor a slight amount.

Answer 39

Creepers

Question 40

___________ should be worn any time there is a danger of airborne chemicals or dust being inhaled.

Answer 40

Respirators

Question 41

Die taps are often used for cutting rivet heads. (T/F)

Answer 41

False

Question 42

Allen and torx drivers are interchangeable

Answer 42

False

Question 43

A 12-point socket provides a better grip than a six-point socket.

Answer 43

False

Question 44

The tenth digit of the vehicle identification number indicates the model year.

Answer 44

True

Question 45

The vehicle weight information decal can be found on the driver’s door jamb.

Answer 45

True

Question 46

Torx heads use a _______ -sided star-shaped driver.

Answer 46

Six

Question 47

___________ is the amount of tension that can be applied to the fastener without any permanent damage.

Answer 47

Proof load

Question 48

Which type of nut is common on steering and suspension components?

Answer 48

Castle

Question 49

Machine screws can have a(n) _____ head.

Answer 49

Round, filister, oval (all are correct)

Question 50

Technician A says a tap cuts external threads. Technician B says a die cuts internal threads. Who is correct?

Answer 50

Neither A nor B